Official websites use .gov
A .gov website belongs to an official government organization in the United States.
Secure .gov websites use HTTPS
A lock (
) or https:// means you’ve safely connected to the .gov website. Share sensitive information only on official, secure websites.
Standards Incorporated by Reference (SIBR) Database
If you would like to be notified when new records are added to the Standards Incorporated by Reference (SIBR) Database, please click on the button to subscribe to this weekly alert.
DISCLAIMER: Data and information released from the Standards Incorporated by Reference databases at NIST are provided on an "AS IS" basis, without representation or warranty of any kind, including without limitation the warranties of merchantability, fitness for a particular purpose and non-infringement. Data and/or information in this database may contain errors or may be incomplete. Please email standardsinfo@nist.gov if you identified missing information or incorrect information. This database is provided by NIST as a public service. Inclusion of records in this database does not represent endorsement or recommendation of standards listed by NIST.
NOTE: This database does not included records related to the Incorporation by Reference for the following: Department of Transportation, Federal Aviation Administration – Airworthiness Directives, State Air Plan Approvals, and Standard Instrumentation Approach Procedures; and the Environmental Protection Agency - State Approval of Air Quality Plans.
| Incorporated by (Agency) | FR Citation | CFR Citation | Document Number Sort ascending | Document Edition / Year | Title of Standard | Standard Publishing Organization |
|---|---|---|---|---|---|---|
| Housing and Urban Development Department | 24 CFR 200, Appendix A | ANSI/BHMA A156.2 | 1989 | Standard for Bored and Preassembled Locks and Latches | American National Standards Institute | |
| Energy Department | 88 FR 17934 | 10 CFR 429 | ANSI/AWWA E103–2015 | 2015 | Energy Conservation Program: Test Procedure for Commercial and Industrial Pumps | American Water Works Association |
| Energy Department | 88 FR 17934 | 10 CFR 431 | ANSI/AWWA E103–2015 | 2015 | Energy Conservation Program: Test Procedure for Commercial and Industrial Pumps | American Water Works Association |
| Occupational Safety and Health Administration | 29 CFR 1926.1436(c)(1)(ii) | ANSI/AWS D14.3 | 1994 | Specification for Welding Earthmoving and Construction Equipment | American Welding Society | |
| Occupational Safety and Health Administration | 29 CFR 1926.6(m)(2) | ANSI/AWS D14.3 | 1994 | Specification for Welding Earthmoving and Construction Equipment | American Welding Society | |
| Federal Highway Administration | 23 CFR 625.4(b)(9) | ANSI/AWS D1.4 | 1992 | Structural Welding Code--Reinforcing Steel | American Welding Society | |
| Occupational Safety and Health Administration | 29 CFR 1910 Subpart L Appendix B Metric Conversion | ANSI/ASTM E 380 | 1993 | Standard for Metric Practice | ASTM International | |
| Occupational Safety and Health Administration | 29 CFR 1918.3(b)(7) | ANSI/ASSE Z87.1 | 1998 | Practice for Occupational and Educational Eye and Face Protection | American Society of Safety Engineers | |
| Occupational Safety and Health Administration | 29 CFR 1918.3(b)(6) | ANSI/ASSE Z87.1 | 2003 | Practice for Occupational and Educational Eye and Face Protection | American Society of Safety Engineers | |
| Occupational Safety and Health Administration | 29 CFR 1918.3(b)(8) | ANSI/ASSE Z87.1 | 1989 | Practice for Occupational and Educational Eye and Face Protection | American Society of Safety Engineers | |
| Coast Guard | 29 CFR 1917.91(a)(1)(i)(B) | ANSI/ASSE Z87.1 | 1998 | Practice for Occupational and Educational Eye and Face Protection | American Society of Safety Engineers | |
| Occupational Safety and Health Administration | 29 CFR 1917.91(a)(1)(i)(C) | ANSI/ASSE Z87.1 | 1989 | Practice for Occupational and Educational Eye and Face Protection | American Society of Safety Engineers | |
| Coast Guard | 29 CFR 1917.91(a)(1)(ii) | ANSI/ASSE Z87.1 | 1998 | Practice for Occupational and Educational Eye and Face Protection | American Society of Safety Engineers | |
| Occupational Safety and Health Administration | 29 CFR 1917.3(b)(7) | ANSI/ASSE Z87.1 | 1998 | Practice for Occupational and Educational Eye and Face Protection | American Society of Safety Engineers | |
| Coast Guard | 29 CFR 1917.91(a)(1)(ii) | ANSI/ASSE Z87.1 | 1989 | Practice for Occupational and Educational Eye and Face Protection | American Society of Safety Engineers | |
| Occupational Safety and Health Administration | 29 CFR 1917.3(b)(8) | ANSI/ASSE Z87.1 | 1989 | Practice for Occupational and Educational Eye and Face Protection | American Society of Safety Engineers | |
| Occupational Safety and Health Administration | 29 CFR 1910 Subpart S Appendix A | ANSI/ASSE Z490.1 | 2001 | Criteria for Accepted Practices in Safety, Health, and Environmental Training | American Society of Safety Engineers | |
| Occupational Safety and Health Administration | 29 CFR 1910 Subpart S Appendix A | ANSI/ASSE Z244.1 | 2003 | Control of Hazardous Energy Lockout/Tagout and Alternative Methods | American Society of Safety Engineers | |
| Environmental Protection Agency | 40 CFR 58 Appendix A, 6.0 (1) | ANSI/ASQC E 4 | 2004 | Specifications and Guidelines for Quality Systems for Environmental Data Collection and Environmental Technology Programs | American Society for Quality Control | |
| Transportation Department | 84 FR 52180 | 49 CFR 191 | ANSI/ASNT ILI–PQ–2005(2010) | 2005 | Pipeline Safety: Safety of Gas Transmission Pipelines: MAOP Reconfirmation, Expansion of Assessment Requirements, and Other Related Amendments | American Society for Nondestructive Testing |
| Safety and Environmental Enforcement Bureau | 30 CFR 250.198(g)(7) | ANSI/ASME SPPE-1d, Addenda | 1996 | Quality Assurance and Certification of Safety and Pollution Prevention Equipment Used in Offshore Oil and Gas Operations | American Society of Mechanical Engineers | |
| Environmental Protection Agency | 40 CFR 62.16050 Table 2 | ANSI/ASME PTC-19.10-1981 | 1981 | Flue and Exhaust Gas Analyses [Part 10, Instruments and Apparatus] | American Society of Mechanical Engineers | |
| Environmental Protection Agency | 40 CFR 62.16050 Table 3 | ANSI/ASME PTC-19.10-1981 | 1981 | Flue and Exhaust Gas Analyses [Part 10, Instruments and Apparatus] | American Society of Mechanical Engineers | |
| Environmental Protection Agency | 84 FR 58601 | 40 CFR 63 | ANSI/ASME PTC 19.10–1981 | 1981 | National Emission Standards for Hazardous Air Pollutants for Clay Ceramics Manufacturing | American National Standards Institute |
| Environmental Protection Agency | 84 FR 15846 | 40 CFR 60 | ANSI/ASME PTC 19.10–1981 | 1981 | Standards of Performance for New Stationary Sources and Emission Guidelines for Existing Sources: Commercial and Industrial Solid Waste Incineration Units; Technical Amendments | American National Standards Institute |
| Environmental Protection Agency | 85 FR 13524 | 40 CFR 63 | ANSI/ASME PTC 19.10–1981 | 1981 | National Emission Standards for Hazardous Air Pollutants: Stationary Combustion Turbines Residual Risk and Technology Review | American National Standards Institute |
| Environmental Protection Agency | 85 FR 42074 | 40 CFR 63 | ANSI/ASME PTC 19.10–1981 | 1981 | National Emission Standards for Hazardous Air Pollutants: Integrated Iron and Steel Manufacturing Facilities Residual Risk and Technology Review | American National Standards Institute |
| Environmental Protection Agency | 86 FR 66045 | 40 CFR 63 | ANSI/ASME PTC 19.10–1981 | 1981 | National Emission Standards for Hazardous Air Pollutants: Refractory Products Manufacturing Residual Risk and Technology Review | American National Standards Institute |
| Environmental Protection Agency | 88 FR 58442 | 40 CFR 60 | ANSI/ASME PTC 19.10–1981 | 1981 | New Source Performance Standards Review for Steel Plants: Electric Arc Furnaces and Argon-Oxygen Decarburization Vessels | American National Standards Institute |
| Environmental Protection Agency | 85 FR 49724 | 40 CFR 63 | ANSI/ASME PTC 19.10–1981 | 1981 | National Emission Standards for Hazardous Air Pollutants: Miscellaneous Coating Manufacturing Residual Risk and Technology Review | American National Standards Institute |
| Environmental Protection Agency | 85 FR 34326 | 40 CFR 63 | ANSI/ASME PTC 19.10–1981 | 1981 | National Emission Standards for Hazardous Air Pollutants: Engine Test Cells/Stands Residual Risk and Technology Review | American National Standards Institute |
| Environmental Protection Agency | 88 FR 58442 | 40 CFR 60 | ANSI/ASME PTC 19.10–1981 | 1981 | New Source Performance Standards Review for Steel Plants: Electric Arc Furnaces and Argon-Oxygen Decarburization Vessels | American National Standards Institute |
| Environmental Protection Agency | 40 CFR 60.105a(f)(2) | ANSI/ASME PTC 19.10-1981 | 1981 | Flue and Exhaust Gas Analyses | American Society of Mechanical Engineers | |
| Environmental Protection Agency | 40 CFR 60.105a(f)(4) | ANSI/ASME PTC 19.10-1981 | 1981 | Flue and Exhaust Gas Analyses | American Society of Mechanical Engineers | |
| Environmental Protection Agency | 40 CFR 60.105a(g)(2) | ANSI/ASME PTC 19.10-1981 | 1981 | Flue and Exhaust Gas Analyses | American Society of Mechanical Engineers | |
| Environmental Protection Agency | 40 CFR 60.105a(g)(4) | ANSI/ASME PTC 19.10-1981 | 1981 | Flue and Exhaust Gas Analyses | American Society of Mechanical Engineers | |
| Environmental Protection Agency | 40 CFR 60.106a(a)(1)(iii) | ANSI/ASME PTC 19.10-1981 | 1981 | Flue and Exhaust Gas Analyses | American Society of Mechanical Engineers | |
| Environmental Protection Agency | 40 CFR 60.106a(a)(1)(vi) | ANSI/ASME PTC 19.10-1981 | 1981 | Flue and Exhaust Gas Analyses | American Society of Mechanical Engineers | |
| Environmental Protection Agency | 40 CFR 60.106a(a)(2)(iii) | ANSI/ASME PTC 19.10-1981 | 1981 | Flue and Exhaust Gas Analyses | American Society of Mechanical Engineers | |
| Environmental Protection Agency | 40 CFR 60.106a(a)(2)(vi) | ANSI/ASME PTC 19.10-1981 | 1981 | Flue and Exhaust Gas Analyses | American Society of Mechanical Engineers | |
| Environmental Protection Agency | 40 CFR 60.106a(a)(3)(ii) | ANSI/ASME PTC 19.10-1981 | 1981 | Flue and Exhaust Gas Analyses | American Society of Mechanical Engineers | |
| Environmental Protection Agency | 40 CFR 60.106a(a)(3)(v) | ANSI/ASME PTC 19.10-1981 | 1981 | Flue and Exhaust Gas Analyses | American Society of Mechanical Engineers | |
| Environmental Protection Agency | 40 CFR 60.106a(a)(4)(iii) | ANSI/ASME PTC 19.10-1981 | 1981 | Flue and Exhaust Gas Analyses | American Society of Mechanical Engineers | |
| Environmental Protection Agency | 40 CFR 60.106a(a)(4)(vi) | ANSI/ASME PTC 19.10-1981 | 1981 | Flue and Exhaust Gas Analyses | American Society of Mechanical Engineers | |
| Environmental Protection Agency | 40 CFR 60.106a(a)(5)(iii) | ANSI/ASME PTC 19.10-1981 | 1981 | Flue and Exhaust Gas Analyses | American Society of Mechanical Engineers | |
| Environmental Protection Agency | 40 CFR 60.105a(b)(2)(ii) | ANSI/ASME PTC 19.10-1981 | 1981 | Flue and Exhaust Gas Analyses | American Society of Mechanical Engineers | |
| Environmental Protection Agency | 40 CFR 60.105a(d)(4) | ANSI/ASME PTC 19.10-1981 | 1981 | Flue and Exhaust Gas Analyses | American Society of Mechanical Engineers | |
| Environmental Protection Agency | 40 CFR 62.16015(e)(1)(i) | ANSI/ASME PTC 19.10 | 1981 | Flue and Exhaust Gas Analyses [Part 10, Instruments and Apparatus] | American Society of Mechanical Engineers | |
| Energy Department | 88 FR 17934 | 10 CFR 431 | ANSI/ASME MFC–5M–1985 (R2006) | 2006 | Energy Conservation Program: Test Procedure for Commercial and Industrial Pumps | American Society of Mechanical Engineers |
| Energy Department | 88 FR 17934 | 10 CFR 429 | ANSI/ASME MFC–5M–1985 (R2001) | 2006 | Energy Conservation Program: Test Procedure for Commercial and Industrial Pumps | American National Standards Institute |