DISCLAIMER: Data and information released from the Standards Incorporated by Reference databases at NIST are provided on an "AS IS" basis, without representation or warranty of any kind, including without limitation the warranties of merchantability, fitness for a particular purpose and non-infringement. Data and/or information in this database may contain errors or may be incomplete. Please email standardsinfo@nist.gov if you identified missing information or incorrect information. This database is provided by NIST as a public service. Inclusion of records in this database does not represent endorsement or recommendation of standards listed by NIST.
NOTE: This database does not included records related to the Incorporation by Reference for the following: Department of Transportation, Federal Aviation Administration – Airworthiness Directives, State Air Plan Approvals, and Standard Instrumentation Approach Procedures; and the Environmental Protection Agency - State Approval of Air Quality Plans.
Incorporated by (Agency) | FR Citation | CFR Citation | Document Number Sort descending | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Mine Safety and Health Administration | 30 CFR 77.403-2 | SAE J-397 | 0 | Deflection Limiting Volume-Protective Structures Laboratory Evaluation | Society of Automotive Engineers | |
Mine Safety and Health Administration | 30 CFR 77.403-2 | SAE J-397a | 0 | Deflection Limiting Volume-Protective Structures Laboratory Evaluation | Society of Automotive Engineers | |
Mine Safety and Health Administration | 30 CFR 77.403-1(d)(1) | SAE J-397a | 0 | Deflection Limiting Volume-Protective Structures Laboratory Evaluation | Society of Automotive Engineers | |
Coast Guard | 46 CFR 58.30-15(c) | SAE J-429 | 1983 | Mechanical and Material Requirements for Externally Threaded Fasteners | Society of Automotive Engineers | |
Coast Guard | 46 CFR 58.03-1(j)(2) | SAE J-429 | 1983 | Mechanical and Material Requirements for Externally Threaded Fasteners | Society of Automotive Engineers | |
Mine Safety and Health Administration | 30 CFR 77.403-2 | SAE J-429d | 0 | Mechanical and Quality Requirements for Externally Threaded Fasteners | Society of Automotive Engineers | |
Mine Safety and Health Administration | 30 CFR 77.403-1(d)(2)(iii)(B) | SAE J-429d | 0 | Mechanical and Quality Requirements for Externally Threaded Fasteners | Society of Automotive Engineers | |
Mine Safety and Health Administration | 30 CFR 77.403-2 | SAE J-429e | 0 | Mechanical and Quality Requirements for Externally Threaded Fasteners | Society of Automotive Engineers | |
Mine Safety and Health Administration | 30 CFR 77.403-1(d)(2)(iii)(B) | SAE J-429e | 0 | Mechanical and Quality Requirements for Externally Threaded Fasteners | Society of Automotive Engineers | |
Mine Safety and Health Administration | 30 CFR 77.403-2 | SAE J-429f | 0 | Mechanical and Quality Requirements for Externally Threaded Fasteners | Society of Automotive Engineers | |
Mine Safety and Health Administration | 30 CFR 77.403-1(d)(2)(iii)(B) | SAE J-429f | 0 | Mechanical and Quality Requirements for Externally Threaded Fasteners | Society of Automotive Engineers | |
Mine Safety and Health Administration | 30 CFR 77.403-1(d)(2)(iii)(B) | SAE J-429g | 0 | Mechanical and Quality Requirements for Externally Threaded Fasteners | Society of Automotive Engineers | |
Mine Safety and Health Administration | 30 CFR 77.403-2 | SAE J-429g | 0 | Mechanical and Quality Requirements for Externally Threaded Fasteners | Society of Automotive Engineers | |
National Highway Traffic Safety Administration | 49 CFR 581.6(b)(1) | SAE J-449a | 1963 | Surface Texture Control | Society of Automotive Engineers | |
Federal Motor Carrier Safety Administration | 49 CFR 393.67(c)(3) | SAE J-476 | 1971 | Dryseal Pipe Threads | Society of Automotive Engineers | |
Occupational Safety and Health Administration | 29 CFR 1928.51(b)(2)(ii) | SAE J-4C | 1965 | Motor Vehicle Seat Belt Assembly | Society of Automotive Engineers | |
National Highway Traffic Safety Administration | 49 CFR 571.5(l)(7) | SAE J-527a | 1967 | Brazed Double Wall Low Carbon Steel Tubing | Society of Automotive Engineers | |
National Highway Traffic Safety Administration | 49 CFR 571.116 S6.13.3(b) | SAE J-527a | 1967 | Brazed Double Wall Low Carbon Steel Tubing | Society of Automotive Engineers | |
Housing and Urban Development Department | 24 CFR 3280.705(f)(1) | SAE J-533B | 1972 | Flares for Tubing | Society of Automotive Engineers | |
Housing and Urban Development Department | 24 CFR 3280.705(f)(2) | SAE J-533B | 1972 | Flares for Tubing | Society of Automotive Engineers | |
Housing and Urban Development Department | 24 CFR 3280.703 | SAE J-533B | 1992 | Flares for Tubing | Society of Automotive Engineers | |
Environmental Protection Agency | 40 CFR 85, Subpart V, Appendix I, Section (H)(1)(a) | SAE J-549 | 0 | Preignition Rating of Spark Plugs | Society of Automotive Engineers | |
Environmental Protection Agency | 40 CFR 85.2122(a)(8)(ii)(B) | SAE J-549A | 0 | Preignition Rating of Spark Plugs | Society of Automotive Engineers | |
Coast Guard | 33 CFR 183.440(a) | SAE J-557 | 1968 | High Tension Ignition Cable | Society of Automotive Engineers | |
Coast Guard | 33 CFR 183.5(b) | SAE J-557 | 1968 | High Tension Ignition Cable | Society of Automotive Engineers | |
Federal Motor Carrier Safety Administration | 49 CFR 393.28 | SAE J-560 | 2009 | Primary and Auxiliary Seven Conductor Electrical Connector for Truck-Trailer Jumper Cable | Society of Automotive Engineers | |
National Highway Traffic Safety Administration | 49 CFR 571.108 S14.2.1.6.2 | SAE J-567b | 1964 | Bulb Sockets | Society of Automotive Engineers | |
National Highway Traffic Safety Administration | 49 CFR 571.5(l)(8) | SAE J-567b | 1964 | Bulb Sockets | Society of Automotive Engineers | |
National Highway Traffic Safety Administration | 49 CFR 571.108 S5.2 (6) | SAE J-567b | 1964 | Bulb Sockets | Society of Automotive Engineers | |
National Highway Traffic Safety Administration | 49 CFR 571.108 S14.2.1.6 | SAE J-573d | 1968 | Lamp Bulbs and Sealed Units | Society of Automotive Engineers | |
National Highway Traffic Safety Administration | 49 CFR 571.108 S14.2.1.6.1 | SAE J-573d | 1968 | Lamp Bulbs and Sealed Units | Society of Automotive Engineers | |
National Highway Traffic Safety Administration | 49 CFR 571.108 S14.2.4.3 | SAE J-573d | 1968 | Lamp Bulbs and Sealed Units | Society of Automotive Engineers | |
National Highway Traffic Safety Administration | 49 CFR 571.108 S14.2.1.6.2 | SAE J-573d | 1968 | Lamp Bulbs and Sealed Units | Society of Automotive Engineers | |
National Highway Traffic Safety Administration | 49 CFR 571.5(l)(9) | SAE J-573d | 1968 | Lamp Bulbs and Sealed Units | Society of Automotive Engineers | |
National Highway Traffic Safety Administration | 49 CFR 571.108 S5.2 (5) | SAE J-573d | 1968 | Lamp Bulbs and Sealed Units | Society of Automotive Engineers | |
National Highway Traffic Safety Administration | 49 CFR 571.131 S6.2.3 | SAE J-575 | 1983 | Test for Motor Vehicle Lighting Devices and Components | Society of Automotive Engineers | |
National Highway Traffic Safety Administration | 49 CFR 571.5(l)(10) | SAE J-575 | 1983 | Tests for Motor Vehicle Lighting Devices and Components | Society of Automotive Engineers | |
National Highway Traffic Safety Administration | 49 CFR 571.131 S6.2.1 | SAE J-578 | 1988 | Color Specifications | Society of Automotive Engineers | |
National Highway Traffic Safety Administration | 49 CFR 571.5(l)(11) | SAE J-578 | 1988 | Color Specification | Society of Automotive Engineers | |
National Highway Traffic Safety Administration | 49 CFR 571.5(l)(12) | SAE J-578 | 1995 | Color Specification | Society of Automotive Engineers | |
National Highway Traffic Safety Administration | 49 CFR 571.403 S6.1.4 | SAE J-578 | 1995 | Color Specifications | Society of Automotive Engineers | |
Federal Motor Carrier Safety Administration | 49 CFR 393.24(b) | SAE J-581 | 2004 | Auxiliary Upper Beam Lamps | Society of Automotive Engineers | |
Federal Motor Carrier Safety Administration | 49 CFR 393.24(d) | SAE J-581 | 2004 | Auxiliary Upper Beam Lamps | Society of Automotive Engineers | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 393.7(b)(1) | SAE J-581 | 2004 | Auxiliary Upper Beam Lamps | Society of Automotive Engineers | |
Federal Motor Carrier Safety Administration | 49 CFR 393.24(b) | SAE J-583 | 2004 | Front Fog Lamp | Society of Automotive Engineers | |
Federal Motor Carrier Safety Administration | 49 CFR 393.24(d) | SAE J-583 | 2004 | Front Fog Lamp | Society of Automotive Engineers | |
Federal Motor Carrier Safety Administration | 49 CFR 393.7(b)(2) | SAE J-583 | 2004 | Front Fog Lamp | Society of Automotive Engineers | |
Federal Motor Carrier Safety Administration | 49 CFR 393.25(c) | SAE J-585 | 2000 | Tail Lamps (Rear Position Lamps) for Use on Motor Vehicles Less Than 2032 mm in Overall Width | Society of Automotive Engineers | |
Federal Motor Carrier Safety Administration | 49 CFR 393.7(b)(5) | SAE J-585 | 2000 | Tail Lamps (Rear Position Lamps) for Use on Motor Vehicles Less Than 2032 mm in Overall Width | Society of Automotive Engineers | |
Federal Motor Carrier Safety Administration | 49 CFR 393.25(c) | SAE J-586 | 2000 | Stop Lamps for Use on Motor Vehicles Less Than 2032 mm in Overall Width | Society of Automotive Engineers |