This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation Sort ascending | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Environmental Protection Agency | 40 CFR 76.15(a)(1) | ASTM D 3176 | 1989 | Standard Practice for Ultimate Analysis of Coal and Coke | ASTM International | |
Nuclear Regulatory Commission | 10 CFR 50.55a(b)(1)(i) | ASME B&PV Code | 1992 | Boiler and Pressure Vessel Code, Section III, 1992 Edition with the 1992 Addenda of Section II | American Society of Mechanical Engineers | |
Coast Guard | 46 CFR 160.133-7(b)(9) | IMO LSA Code | 2010 | Life-Saving Appliances, including LSA Code, pages 7-71 | International Maritime Organization | |
National Highway Traffic Safety Administration | 49 CFR 572.183(c)(2) | Drawing No. 175-9000 | 2009 | Headform assembly | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Environmental Protection Agency | 40 CFR 136.3(b)(5)(iii)(R) | EPA Method 365.3 | 1978 | Phosphorus, All Forms (Colorimetric, Ascorbic Acid, Two Reagent) | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 435.15 Note 3 | EPA Method 1617 | 2015 | Static Sheen Test | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 82, Subpart B, Appendix A, Section (2) | SAE J-1989 | 1989 | Recommended Service Procedure for the Containment of R-12 | Society of Automotive Engineers | |
Environmental Protection Agency | 40 CFR 75, Appendix F, Section 5.5.3.3 | ASTM D 3176 | 1989 | Standard Practice for Ultimate Analysis of Coal and Coke | ASTM International | |
Environmental Protection Agency | 40 CFR 147.1751(b)(2) | NDUIC regulations | 1979 | North Dakota Century Code, Ch. 38-12 (Regulation, Development, and Production of Subsurface Minerals) | State of North Dakota | |
Environmental Protection Agency | 40 CFR 63.7732(g)(1)(v) | NIOSH Method 2010 | 1994 | Amines, Aliphatic, Issue 2 | National Institute for Occupational Safety and Health | |
Coast Guard | 46 CFR 160.049-1(b) | Drawing No. 160.049-1 | 2012 | Buoyant Cushion, Plastic Foam | U.S. Coast Guard | |
Food and Drug Administration | 21 CFR 178.3770(b)(3) | ASTM D 1387 | 1978 | Standard Test Method for Saponification Number (Empirical) of Synthetic and Natural Waxes | ASTM International | |
National Highway Traffic Safety Administration | 10 CFR 52 App. C, VI A | AP 600 | 1999 | Tier 1, Tier 2, and Generic Technical Specifications | Westinghouse Electric Company | |
Environmental Protection Agency | 40 CFR 75, Appendix D, Section 2.3.4 | ASTM D 3588 | 1998 | Standard Practice for Calculating Heat Value, Compressibility Factor, and Relative Density (Specific Gravity) of Gaseous Fuels | ASTM International | |
Energy Department | 10 CFR 430 Subpart B, App. M, 3.11.2, b | ASHRAE 37 | 2005 | Method of Testing for Rating Unitary Air Conditioning and Heat Pump Equipment | American Society of Heating, Refrigerating and Air Conditioning Engineers | |
Coast Guard | 46 CFR 110.10-1(g)(22) | IEC 92-306 | 1980 | Electrical Installation in Ships, Part 306: Equipment-Luminaries and accessories, Third Edition | International Electrotechnical Commission | |
National Highway Traffic Safety Administration | 49 CFR 572.18(a) | Drawing No. SA 103C 001 | 1976 | Operation and Maintenance Manual for 3-year-old Test Dummy | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Environmental Protection Agency | 40 CFR 136.3(a) Table ID (56) | EPA Method 525.2 | 1995 | Determination of Organic Compounds in Drinking Water by Liquid-Solid Extraction and Capillary Column Gas Chromatography/Mass Spectrometry-Revision 2.0 | U.S. Environmental Protection Agency | |
Occupational Safety and Health Administration | 29 CFR 1910.266(d)(3)(iv) | SAE J-386 | 1985 | Operator Restraint Systems for Off-Road Work Machines | Society of Automotive Engineers | |
Consumer Product Safety Commission | 16 CFR 1201.7(b)(2) | ANSI Z97.1 | 1972 | Performance Specifications and Methods of Test for Safety Glazing Material Used in Buildings | American National Standards Institute | |
Housing and Urban Development Department | 24 CFR 200, Appendix A | ASTM C 754 | 1988 | Installation of Steel Framing Members to Receive Screw-Attached Gypsum | ASTM International | |
Coast Guard | 46 CFR 62.35-40(c) | ABS Publication | 2003 | Rules for Building and Classing Steel Vessels, Part 4 Vessel Systems and Machinery | American Bureau of Shipping | |
Environmental Protection Agency | 40 CFR 75, Appendix F, Section 3.3.6.2 | ASTM D 5865 | 2001 | Standard Test Method for Gross Calorific Value of Coal and Coke | ASTM International | |
Nuclear Regulatory Commission | 10 CFR 34.20(a)(1) | ANSI N432 | 1980 | Radiological Safety for the Design and Construction of Apparatus for Gamma Radiography | American National Standards Institute | |
Coast Guard | 33 CFR 164.03(b) | RTCM Paper 12-78/DO-100 | 1977 | Minimum Performance Standards, Loran C Receiving Equipment | Radio Technical Commission for Maritime Services | |
Occupational Safety and Health Administration | 29 CFR 1926.1433(c)(2)(ii) | SAE J-987 | 2003 | Lattice Boom Cranes—Method of Test | Society of Automotive Engineers | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (63) | EPA Method 625 | 1982 | Base/Neutrals and Acids by GC/MS | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 141.40(a)(3) Table 1 (chromium) | EPA Method 218.7 | 2011 | Determination of Hexavalent Chromium in Drinking Water by Ion Chromatography with Post-Column Derivatization and UV-Visible Spectroscopic Detection | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 60.5406(b)(4)(iii) | ASME PTC 19.10 | 1981 | Flue and Exhaust Gas Analyses [part 10, Instruments and Apparatus] | American Society of Mechanical Engineers | |
Coast Guard | 40 CFR 1065.705 Table 1 | ISO 12185 | 2001 | Crude petroleum and petroleum products--Determination of density--Oscillating U-tube method | International Organization for Standardization | |
Minerals Management Service | 30 CFR 250.1202(a)(2)(i) | API MPMS | 2013 | Chapter 4, Section 8 | American Petroleum Institute | |
Drug Enforcement Administration | 21 CFR 1311.08(b)(1)(ii) | FIPS Publication 140-2 | 2004 | Annex B to FIPS Publication 140-2 ("Security Requirements for Cryptographic Modules''): Approved Protection Profiles | National Institute of Standards and Technology, U.S. Department of Commerce | |
Environmental Protection Agency | 40 CFR 141.23(k)(1) Table (17) Nickel | APHA Method 3113 B | 1999 | Metals by Graphite Furnace Atomic Absorption | American Public Health Association | |
Environmental Protection Agency | 40 CFR 60, Appendix B, PS-1, 16.0(4) | EPA-340-1-86-009a | 1986 | Evaluation of Opacity CEMS Reliability and Quality Assurance Procedures. Volume 1 | U.S. Environmental Protection Agency | |
Occupational Safety and Health Administration | 29 CFR 1910.136(b)(2) | ASTM F 2412 | 2005 | Standard Test Methods for Foot Protection | ASTM International | |
National Highway Traffic Safety Administration | 49 CFR 571.205(a) S5.1.2.1 | ANSI Z26.1a | 1980 | Safety Code for Safety Glazing Materials for Glazing Motor Vehicles Operating on Land Highways | American National Standards Institute | |
National Highway Traffic Safety Administration | 27 CFR 21.53(a) | The United States Pharmacopoeia | 1980 | Formula No. 27-A | U.S. Pharmacopeial Convention | |
Research and Special Programs Administration | 49 CFR 179.100-7(c)(1) | ASTM A 240/A 240M | 1994 | Standard Specification for Heat-Resisting Chromium and Chromium-Nickel Stainless Steel Plate, Sheet and Strip for Fusion-Welded Unfired Pressure Vessels | ASTM International | |
Rural Utilities Service | 7 CFR 1755.870(b)(5)(iii) | ASTM D 2287 | 1981 | Standard Specification for Nonrigid Vinyl Chloride Polymer and Copolymer Molding and Extrusion Compounds | ASTM International | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 179.400-25 | AAR Specification M-1002 | 2000 | AAR Manual of Standards and Recommended Practices, Section C-Part III, Specification for Tank Cars | Association of American Railroads | |
Federal Motor Carrier Safety Administration | 49 CFR 393.55(e) | FMVSS 121 | 1998 | Air Brake Systems | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Coast Guard | 46 CFR 54.10-5 Note | ASME B&PV Code | 1998 | Boiler and Pressure Vessel Code, Section VIII, Division 1, Rules for Construction of Pressure Vessels (with 1999 and 2000 addenda) | American Society of Mechanical Engineers | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (48) | APHA Method 5530 B | 2005 | Phenols, Cleanup Procedure | American Public Health Association | |
Occupational Safety and Health Administration | 29 CFR 1910 Subpart S Appendix A | NFPA 34 | 2003 | Dipping and Coating Processes Using Flammable or Combustible Liquids | National Fire Protection Association | |
Coast Guard | 46 CFR 160.076-21(a) | UL 1180 | 2009 | Fully Inflatable Recreational Personal Flotation Devices | Underwriters Laboratories, Inc. | |
Coast Guard | 33 CFR 154.106(h)(1) | OCIMF Publication | 1996 | International Safety Guide for Oil Tankers and Terminals (ISGOTT), Section 6.10, 4th Edition | Oil Companies International Marine Forum | |
Environmental Protection Agency | 40 CFR 261, Appendix IX, Tables 1 and 2 | EPA Method 0061 | 1996 | Determination of Hexavalent Chromium Emissions from Stationary Sources | U.S. Environmental Protection Agency | |
Federal Aviation Administration | 14 CFR 36 Appendix A A36.1.4 | ICAO Annex 16 | 2002 | Aircraft Noise, Volume I, Third Edition, July 1993, Amendment 7, Appendix 2 | International Civil Aviation Organization | |
Coast Guard | 46 CFR 160.151-15(n) | IMO LSA Code | 2010 | Life Saving Appliances, including LSA Code | International Maritime Organization | |
Environmental Protection Agency | 40 CFR 1065.1010(b)(37) | ASTM D 5762 | 2012 | Standard Test Method for Nitrogen in Petroleum and Petroleum Products by Boat-Inlet Chemiluminescence | ASTM International |