This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation Sort ascending | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Coast Guard | 46 CFR 56.95-1(a) | ASME B31.1 | 2001 | Power Piping ASME Code for Pressure Piping | American Society of Mechanical Engineers | |
Environmental Protection Agency | 40 CFR 282.68(d)(1)d(i)(A) | LAUSTP | 1995 | Louisiana Statutory Requirements Applicable to the Underground Storage Tank Program | State of Louisiana | |
Pipeline and Hazardous Materials Safety Administration | 40 CFR 136.3(a) Table IB (32) | APHA Method 3500-Pb B | 1997 | Lead by Dithizone Method | American Public Health Association | |
Occupational Safety and Health Administration | 29 CFR 1910.103(c)(1)(iv)(A)(2) | CGA S-1.1 | 1963 | Safety Release Device Standard--Cylinders for Compressed Gases | Compressed Gas Association | |
Environmental Protection Agency | 40 CFR 92.5(b)(10) | ASTM D 5186 | 1991 | Standard Test Method for Determination of Aromatic Content and Polynuclear Aromatic Content of Diesel Fuels and Aviation Turbine Fuels by Supercritical Fluid Chromatography | ASTM International | |
Rural Utilities Service | 7 CFR 1755.505(a) | RUS Bulletin 1753F-153 (RUS Form 515d) | 2001 | Specifications and Drawings for Service Installations at Customer Access Locations | Rural Utilities Service, U.S. Department of Agriculture | |
Coast Guard | 46 CFR 160.156-7(b)(8)(ii)(C) | UL 1102 | 1999 | Standard for Safety for Nonintegral Marine Fuel Tanks, Fifth Edition | Underwriters Laboratories, Inc. | |
National Highway Traffic Safety Administration | 40 CFR 136.3(a) Table IB (15) | APHA Method 5220 B | 1997 | Chemical Oxygen Demand by Closed Reflux and Titration | American Public Health Association | |
Research and Special Programs Administration | 45 CFR 162.1102(b)(2)(v)(A) | NCPDP Publication | 1999 | Telecommunication Standard, Implementation Guide Version 5, Release 1 | National Council for Prescription Drug Programs | |
Occupational Safety and Health Administration | 29 CFR 1910.102(c)(1) | NFPA 51A | 2006 | Standard for Acetylene Cylinder Charging Plants | National Fire Protection Association | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (32) | ASTM D 1976 | 2007 | Standard Test Method for Elements in Water by Inductively-Coupled Argon Plasma Atomic Emission Spectroscopy | ASTM International | |
Environmental Protection Agency | 40 CFR 141.23(k)(1) Table (6) Beryllium | APHA Method 3120 B | 1992 | Metals by Inductively Coupled Plasma | American Public Health Association | |
Housing and Urban Development Department | 24 CFR 3280.703 | ANSI Z21.10.1 | 1998 | Gas Water Heaters—Volume 1, Storage Water Heaters with Input Ratings of 75,000 BTU per hour or Less with Addendum Z21.10.1a-2000. | American National Standards Institute | |
Environmental Protection Agency | 40 CFR 178.345-1(f) | EPA-821-B-98-016 | 1998 | Analytical Methods for the Determination of Pollutants in Pharmaceutical Manufacturing Industry Wastewaters, EPA Method 1671 | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 80.46(b)(1) | ASTM D 1319 | 2013 | Standard Test Method for Hydrocarbon Types in Liquid Petroleum Products by Fluorescent Indicator Adsorption | ASTM International | |
Mine Safety and Health Administration | 30 CFR 56.14130(j) | SAE J-1040 | 1986 | Performance Criteria for Rollover Protective Structures (ROPS) for Construction, Earthmoving, Forestry and Mining Machines | Society of Automotive Engineers | |
Federal Highway Administration | 23 CFR 625.4(b)(10) | AASHTO Publication | 1994 | Standard Specification for Structural Supports for Highway Signs, Luminaires, and Traffic Signals | American Association of State Highway and Transportation Officials | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB Footnote 52 | EPA Method 335.4 | 1995 | Determination of Total Cyanide by Semi-Automated Colorimetry, Revision 1.0 | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 435.11(k)(2) | EPA Method 1674 | 2011 | Determination of the Amount of Non-Aqueous Drilling Fluid (NAF) Base Fluid from Drill Cuttings by a Retort Chamber (Derived from API Recommended Practice 13B-2) | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 80.177(d)(1)(ii) | ASTM D 4814 | 2013 | Standard Specification for Automotive Spark-Ignition Engine Fuel | ASTM International | |
Coast Guard | 40 CFR 60.485(d)(1) | ASTM E 168 | 1977 | Standard Practices for General Techniques of Infrared Quantitative Analysis | ASTM International | |
Mine Safety and Health Administration | 30 CFR 77.403-1(d)(2)(iii)(B) | SAE J-995 | 1967 | Mechanical and Quality Requirements for Steel Nuts | Society of Automotive Engineers | |
Food and Drug Administration | 21 CFR 1.24(a)(6)(i) | NIST Handbook 44 | 2010 | Specifications, Tolerances, and Other Technical Requirements for Weighing and Measuring Devices | National Institute of Standards and Technology, U.S. Department of Commerce | |
National Highway Traffic Safety Administration | 49 CFR 572.180(a)(2)(viii) | Drawing No. 175-5000 | 2009 | Abdominal Assembly | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Environmental Protection Agency | 40 CFR 147.2800(a)(2) | NMIUIC regulations | 1984 | CNMI Coastal Resources Management Act, 2 CMC sections 1501, et seq. | Commonwealth of the Northern Mariana Islands | |
Environmental Protection Agency | 40 CFR 63.5758(c) | ASTM D 1475 | 1990 | Standard Test Method for Density of Paint, Varnish, Lacquer, and Related Products | ASTM International | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.198(h)(58) | API RP 14F | 2008 | Recommended Practice for Design and Installation of Electrical Systems for Offshore Production Platforms | American Petroleum Institute | |
Coast Guard | 46 CFR 159.005-13(a)(4) | UUCG Publication M16714.3 | 2012 | Equipment Lists (series) | U.S. Coast Guard | |
Housing and Urban Development Department | 24 CFR 200, Appendix A | NAS Publication 1571 | 1968 | Criteria for Selection and Design of Residential Slabs-on-Ground, Report #33 | National Academy of Sciences, Building Research Advisory Board | |
Rural Utilities Service | 7 CFR 1755.890(l)(5) | ICEA S-84-608 | 1988 | Standard for Telecommunications Cable, Filed, Polyolefin Insulated, Copper Conductor Technical Requirements | Insulated Cable Engineers Association | |
Food and Drug Administration | 21 CFR 184.1250(b) | Food Chemicals Codex | 1996 | Cellulase Enzyme Preparation Derived from Trichoderma Longibrachiatum | National Academy Press | |
Food and Drug Administration | 21 CFR 184.1505(b) | Food Chemicals Codex | 1981 | Mono- and Diglycerides | National Academy Press | |
Federal Railroad Administration | 49 CFR 229.205(c) | AAR S-580 | 2005 | Locomotive Crashworthiness Requirements | Association of American Railroads | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (31) | ASTM D 1426B | 2008 | Ammonia by Titration | ASTM International | |
Rural Utilities Service | 7 CFR 1728.97(e)(2) | AWPA A2 | 2008 | Standard Methods for Analysis of Waterborne Preservatives and Fire-Retardant Formulations | American Wood Protection Association | |
Environmental Protection Agency | 40 CFR 136.3(a) Table ID (46) | APHA Method 6630 C | 2000 | Organochlorine Pesticides and PCBs by Liquid/Liquid Extraction and GC/ECD | American Public Health Association | |
Housing and Urban Development Department | 24 CFR 100.205(e)(2)(iv) | ICC 2001 IBC Supplement to 2000 IBC | 2001 | International Building Code (IBC), as amended by the 2001 Supplement to the International Building Code | International Code Council | |
Coast Guard | 46 CFR 32.01-1(c)(1) | ASTM D 4986 | 1998 | Standard Test Method for Horizontal Burning Characteristics of Cellular Polymeric Materials | ASTM International | |
Environmental Protection Agency | 40 CFR 86.113-94(b)(3) | ASTM D 976 | 2011 | Standard Test Method for Calculated Cetane Index of Distillate Fuels | ASTM International | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (51) | APHA Method 6410 B | 2000 | Base/Neutral and Acid Extractable Compounds by GC/MS | American Public Health Association | |
Environmental Protection Agency | 40 CFR 141.25(a) Table | USGS R-1120-76 | 1977 | Gross alpha and beta radioactivity, dissolved and suspended. Residue method | U.S. Geological Survey | |
Environmental Protection Agency | 40 CFR 60.4415(a)(1)(ii) | ASTM D 4084 | 2005 | Standard Test Method for Analysis of Hydrogen Sulfide in Gaseous Fuels (Lead Acetate Reaction Rate Method) | ASTM International | |
Coast Guard | 40 CFR 136.3(a) Table IB (32) | ASTM D 3559C | 2008 | Standard Test Methods for Lead in Water, Differential Pulse Anodic Stripping Voltammetry | ASTM International | |
Environmental Protection Agency | 40 CFR 75.6(a)(45) | ASTM D 6667 | 2004 | Standard Test Method for Determination of Total Volatile Sulfur in Gaseous Hydrocarbons and Liquefied Petroleum Gases by Ultraviolet Fluorescence | ASTM International | |
Environmental Protection Agency | 40 CFR 141.23(k)(1) Table (15) Magnesium | ASTM D 511B | 2003 | Standard Test Methods for Calcium and Magnesium In Water, Atomic Absorption Spectrophotometric | ASTM International | |
Environmental Protection Agency | 40 CFR 60, Appendix A-8, Method 29, Section 17.0(3) | EPA Method 200.7 | 1987 | Inductively Coupled Plasma Atomic Emission Spectrometric Method for Trace Element Analysis of Water and Wastes | U.S. Environmental Protection Agency | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.800(c)(3) | API RP 2SM | 2001 | Recommended Practice for Design, Manufacture, Installation, and Maintenance of Synthetic Fiber Ropes for Offshore Mooring | American Petroleum Institute | |
Energy Department | 10 CFR 434.701.1 RS-2 | ASHRAE 55 | 1992 | Thermal Environmental Conditions for Human Occupancy including addenda 55a-95 (RS-2) | American Society of Heating, Refrigerating and Air Conditioning Engineers | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 171.7(a)(3) | ASTM E 213 | 1998 | Standard Practice for Ultrasonic Examination of Metal Pipe and Tubing | ASTM International | |
Coast Guard | 45 CFR 162.920(c)(1)(vi) | CAQH Publication | 2011 | Phase I CORE 157: Eligibility and Benefits System Availability Rule, version 1.1.0 | Council for Affordable Quality Healthcare's (CAQH) Committee on Operating Rules for Information Exchange (CORE) |