Skip to main content
U.S. flag

An official website of the United States government

Official websites use .gov
A .gov website belongs to an official government organization in the United States.

Secure .gov websites use HTTPS
A lock ( ) or https:// means you’ve safely connected to the .gov website. Share sensitive information only on official, secure websites.

Standards Incorporated by Reference (SIBR) Database

Download PDF

If you would like to be notified when new records are added to the Standards Incorporated by Reference (SIBR) Database, please click on the button to subscribe to this weekly alert.

SUBSCRIBE

Accessing Standards Incorporated by Reference

This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).

More information

Displaying 24901 - 24950 of 27213
Incorporated by (Agency) FR Citation Sort ascending CFR Citation Document Number Document Edition / Year Title of Standard Standard Publishing Organization
Environmental Protection Agency 40 CFR 435.13 Note 6 EPA-821-R-11-004 2011 Analytic Methods for the Oil and Gas Extraction Point Source Category U.S. Environmental Protection Agency
Environmental Protection Agency 40 CFR 80.1468(b)(6) ASTM E 711 1987 Standard Test Method for Gross Calorific Value of Refuse-Derived Fuel by the Bomb Calorimeter ASTM International
Rural Utilities Service 7 CFR 1755.902(p)(4) IEEE C2 2007 National Electrical Safety Code Institute of Electrical and Electronics Engineers
Minerals Management Service 30 CFR 250.1903 ISO/IEC 17011 2005 Conformity assessment—General requirements for accreditation bodies accrediting conformity assessment bodies, First edition International Organization for Standardization / International Electrotechnical Commission
National Highway Traffic Safety Administration 49 CFR 572.91(a)(1) Drawing No. 126-0022 1992 Construction of the Newborn Infant Dummy Reprographic Technologies
Pipeline and Hazardous Materials Safety Administration 49 CFR 571.5(d)(2) ASTM B 117 1964 Standard Method of Salt Spray (Fog) Testing ASTM International
Environmental Protection Agency 40 CFR 147.1700(a)(5) NCUIC regulations 1989 North Carolina Drinking Water Act, N.C. GEN. STAT. §§ 130A-311 through 130A-332 State of North Carolina
Coast Guard 46 CFR 164.120-7, Table 164.120-7(c)(1)(ii) ISO 2555:1989(E) 1990 Plastics—Resins in the liquid state or as emulsions or dispersions—Determination of apparent viscosity by the Brookfield test method, Second Edition International Organization for Standardization / International Electrotechnical Commission
Environmental Protection Agency 40 CFR 63.5935 Corrosion-resistant industry standard IAPMO PS 199 2015 Title Unkown International Association of Plumbing and Mechanical Officials
Environmental Protection Agency 40 CFR 136.3(a) Table IB (30) APHA Method 3111 B 1999 Metals by Flame Atomic Absorption American Public Health Association
Environmental Protection Agency 40 CFR 136.3(b)(33)(iii) USGS Open File Report (OFR) 92-146 1992 Methods of Analysis by the U.S. Geological Survey National Water Quality Laboratory--Determination of Total Phosphorus by Kjeldahl Digestion Method and an Automated Colorimetric Finish That Includes Dialysis U.S. Geological Survey
Occupational Safety and Health Administration 29 CFR 1910.104(b)(4)(ii) ASME B&PV Code 1968 Boiler and Pressure Vessel Code, Section VIII, Paragraph UG-84 American Society of Mechanical Engineers
Research and Special Programs Administration 30 CFR 250.198(h)(72) ANSI/API Spec. 6D 2009 Specification for Pipeline Valves, Twenty-third Edition, Errata 1, June 2008; Errata 2, November 2008; Errata 3, February 2009; Addendum 1, October 2009; Contains API Monogram Annex as Part of U.S. National Adoption American Petroleum Institute
Safety and Environmental Enforcement Bureau 30 CFR 250.198(h)(11) API MPMS 2003 Chapter 4, Section 2 American Petroleum Institute
Coast Guard 46 CFR 160.077-19(c)(13) UL 1517 2012 Hybrid Personal Flotation Devices Underwriters Laboratories, Inc.
National Highway Traffic Safety Administration 49 CFR 572.177(b)(1) Part No. 420-0000 2011 Engineering drawings and specifications National Highway Traffic Safety Administration, U.S. Department of Transportation
Coast Guard 46 CFR 108.646(a) IMO Resolution A.760(18) 1993 Symbols Related to Life-Saving Appliances and Arrangements International Maritime Organization
Environmental Protection Agency 40 CFR 98.7(m)(2) EPA 833-B-96-003 1996 NPDES Permit Writers' Manual, Section 7.1.3, Sample Collection Methods U.S. Environmental Protection Agency
Housing and Urban Development Department 24 CFR 200, Appendix A ACI 213R 1987 Guide for Structural Lightweight Aggregate Concrete American Concrete Institute
Food and Drug Administration 21 CFR 184.1610(b) Food Chemicals Codex 1981 Potassium Alginate National Academy Press
Environmental Protection Agency 40 CFR 600.011(b)(1) ASTM D 975 2013 Standard Specification for Diesel Fuel Oils ASTM International
Environmental Protection Agency 40 CFR 141.40(a)(3) Table 1 (bromochloromethane (Halon 1011)) EPA Method 524.3 2009 Measurement of Purgeable Organic Compounds in Water by Capillary Column Gas Chromatography/Mass Spectrometry U.S. Environmental Protection Agency
Environmental Protection Agency 40 CFR 60 Subpart MMMM, Table 3, Sulfur Dioxide ASME PTC 19.10 1981 Flue and Exhaust Gas Analyses [part 10, Instruments and Apparatus] American Society of Mechanical Engineers
Coast Guard 46 CFR 52.01-115 ASME B&PV Code 1989 Boiler and Pressure Vessel Code, Section I, Rules for Construction of Power Boilers American Society of Mechanical Engineers
Environmental Protection Agency 40 CFR 141.23(k)(1) Table (16) Mercury APHA Method 3112 B 1995 Mercury by Cold Vapor Atomic Absorption American Public Health Association
Public Health Service 42 CFR 84.79(c) CGA G-7.1 1966 Commodity Specification for Air Compressed Gas Association
Environmental Protection Agency 40 CFR 60, Appendix A-8, Method 29, Section 18.0, Table 29-3 EPA Method 7091 1986 Test Methods for Evaluating Solid Waste, Physical/Chemical Methods, SW-846 Third Edition U.S. Environmental Protection Agency
National Highway Traffic Safety Administration 49 CFR 571.5(l)(24) SAE J-826 1987 Devices for Use in Defining and Measuring Vehicle Seating Accommodation Society of Automotive Engineers
Safety and Environmental Enforcement Bureau 30 CFR 250.901(a)(21) AWS D1.4-98 1998 Structural Welding Code—Reinforcing Steel American Welding Society
Environmental Protection Agency 40 CFR 136.3(a) Table ID (40) ASTM D 5812 2002 Standard Test Method for Determination of Organochlorine Pesticides in Water by Capillary Column Gas Chromatography ASTM International
Environmental Protection Agency 40 CFR 89.6(a)(9) ASTM D 5186 1996 Standard Test Method for Determination of Aromatic Content and Polynuclear Aromatic Content of Diesel Fuels and Aviation Turbine Fuels by Supercritical Fluid Chromatography ASTM International
Food and Drug Administration 21 CFR 165.110(b)(4)(iii)(E)(14)(ii) EPA-600-4-91-010 1994 Method 200.9--Determination of Trace Elements by Stabilized Temperature Graphite Furnace Atomic Absorption U.S. Environmental Protection Agency
Mine Safety and Health Administration 30 CFR 56.14130(h) SAE J-386 1997 Operator Restraint Systems for Off-Road Work Machines Society of Automotive Engineers
Nuclear Regulatory Commission 10 CFR 50.55a(b)(2)(xxiii) ASME B&PV Code 2001 Boiler and Pressure Vessel Code, Section XI, Appendix VIII and the supplements to Appendix VIII and Article I-3000 of Section XI of 2002 Addenda through the latest edition and addenda American Society of Mechanical Engineers
Occupational Safety and Health Administration 29 CFR 1926.97(a) Note to paragraph (a) ASTM D 178 2010 Standard Specification for Rubber Insulating Matting ASTM International
Environmental Protection Agency 40 CFR 136.3(a) Table IC (43) EPA Method 601 1982 Purgeable Halocarbons U.S. Environmental Protection Agency
Coast Guard 40 CFR 136.3(a) Table IB (34) ASTM D 858A 2007 Standard Test Methods for Manganese in Water, Atomic Absorption, Direct ASTM International
Food and Drug Administration 21 CFR 184.1472(a)(2)(vii) AOCS RP Cd 8b-90 1992 Peroxide Value, Acetic Acid -- Isooctane Method American Oil Chemists Society
Federal Aviation Administration 14 CFR 152.11(a) 150/5345-46 1975 Specification for Semiflush Airport Lights Federal Aviation Administration, U.S. Department of Transportation
Energy Department 10 CFR 430 Subpart B, App. M, 2.2, a ARI 210/240 2006 Unitary Air-Conditioning and Air-Source Heat Pump Equipment Air Conditioning and Refrigeration Institute
Consumer Product Safety Commission 16 CFR 1632.5(b)(2)(ii) AATCC 124 1996 Appearance of Durable Press Fabrics After Repeated Home Laundering American Association of Textile Chemists and Colorists
National Archives and Records Administration 36 CFR 1238.22(g) AIIM MS45 1990 Recommended Practice for Inspection of Stored Silver-Gelatin Microforms for Evidence of Deterioration Association for Information and Image Management
Environmental Protection Agency 40 CFR 265.1063(d)(1) ASTM E 169 1987 Standard Practices for General Techniques of Ultraviolet-Visible Quantitative Analysis ASTM International
Housing and Urban Development Department 24 CFR 3280.4(a) SJI All Standards 2018 All specifications, standards and codes without specific reference Steel Joist Institute
Coast Guard 46 CFR 63.25-9(a) IMO Resolution MEPC.76(40) 1997 Standard Specification for Shipboard Incinerators International Maritime Organization
Environmental Protection Agency 40 CFR 136.3(a) Table IG Footnote 3 EPA Method 1657 1993 The Determination of Organo-Phosphorus Pesticides in Municipal and Industrial Wastewater U.S. Environmental Protection Agency
Environmental Protection Agency 40 CFR 444.12(b)(1) Table (8) APHA Method 2540 D 1997 Solids, Total Suspended Solids Dried at 103-105 degrees C American Public Health Association
Environmental Protection Agency 40 CFR 98.334(b)(2)(i) ASTM E 1941 2004 Standard Test Method for Determination of Carbon in Refractory and Reactive Metals and Their Alloys ASTM International
Rural Utilities Service 46 CFR 111.60-1(d) IEEE 45 2002 Recommended Practice for Electrical Installations on Shipboard Institute of Electrical and Electronics Engineers
Mine Safety and Health Administration 30 CFR 57.14130(b)(2) SAE J-1194 1983 Roll-Over Protective Structures for Wheeled Agricultural Tractors Society of Automotive Engineers

DISCLAIMER: Data and information released from the Standards Incorporated by Reference databases at NIST are provided on an "AS IS" basis, without representation or warranty of any kind, including without limitation the warranties of merchantability, fitness for a particular purpose and non-infringement. Data and/or information in this database may contain errors or may be incomplete. Please email standardsinfo@nist.gov if you identified missing information or incorrect information. This database is provided by NIST as a public service. Inclusion of records in this database does not represent endorsement or recommendation of standards listed by NIST.

NOTE: This database does not included records related to the Incorporation by Reference for the following: Department of Transportation, Federal Aviation Administration – Airworthiness Directives, State Air Plan Approvals, and Standard Instrumentation Approach Procedures; and the Environmental Protection Agency - State Approval of Air Quality Plans.