This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation Sort ascending | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Coast Guard | 46 CFR 160.077-11(c)(1)(ii) | UL 1191 | 2013 | Standard for Components for Personal Flotation Devices | Underwriters Laboratories, Inc. | |
National Highway Traffic Safety Administration | 49 CFR 572.173(c)(2) | Drawing No. 420-2000 | 2011 | Neck Assembly | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IG (Toxaphene) | EPA Method 525.2 | 1995 | Determination of Organic Compounds in Drinking Water by Liquid-Solid Extraction and Capillary Column Gas Chromatography/Mass Spectrometry-Revision 2.0 | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 300.915(f)(9) | ASTM D 93 | 1990 | Standard Test Method for Flash Point by Pensky-Martens Closed Tester | ASTM International | |
Environmental Protection Agency | 40 CFR 63, Subpart DDDD, Table 4, (4) | ASTM D 6348 | 2003 | Standard Test Method for Determination of Gaseous Compounds by Extractive Direct Interface Fourier Transform Infrared (FTIR) Spectroscopy | ASTM International | |
Energy Department | 10 CFR 431.96 (b)(2) Table 1 | ISO Standard 13256-1 (1998) | 1998 | Water-source heat pumps—Testing and rating for performance—Part 1: Water-to-air and brine-to-air heat pumps | International Organization for Standardization | |
Food and Drug Administration | 21 CFR 172.210(b)(2) | ASTM D 566 | 1982 | Standard Test Method for Dropping Point of Lubricating Grease | ASTM International | |
Coast Guard | 46 CFR 52.05-30(a) | ASME B&PV Code | 2001 | Boiler and Pressure Vessel Code, Section I, Rules for Construction of Power Boilers | American Society of Mechanical Engineers | |
Coast Guard | 21 CFR 165.110(b)(4)(iii)(F)(21) | EPA-600-R-95-131 | 1995 | Method 506, Rev. 1.1—Determination of phthalate and adipate esters in drinking water by liquid/liquid extraction or liquid/solid extraction and gas chromatography with photoionization detection | U.S. Environmental Protection Agency | |
Coast Guard | 46 CFR 56.60-2 Table 56.60-2(a) | ASTM B 26/B 26M | 1997 | Standard Specification for Aluminum-Alloy Sand Castings | ASTM International | |
Energy Department | 10 CFR 434.403.1 Table 403.1a | ARI 340/360 | 1993 | Commercial and Industrial Unitary Air-Conditioning and Heat Pump Equipment (RS-16) | Air Conditioning and Refrigeration Institute | |
Rural Utilities Service | 7 CFR 1755.890(k)(5)(i) | ICEA S-84-608 | 1988 | Standard for Telecommunications Cable, Filed, Polyolefin Insulated, Copper Conductor Technical Requirements | Insulated Cable Engineers Association | |
Environmental Protection Agency | 40 CFR 60.106(j)(2) | ASTM D 129 | 1964 | Standard Test Method for Sulfur in Petroleum Products (General Bomb Method) | ASTM International | |
Mine Safety and Health Administration | 30 CFR 57.14130(j) | SAE J-386 | 1997 | Operator Restraint Systems for Off-Road Work Machines | Society of Automotive Engineers | |
National Highway Traffic Safety Administration | 49 CFR 572.42(a) | Drawing No. SA-SID-M001A | 1994 | Completed Assembly Side Impact Dummy | Reprographic Technologies | |
National Oceanic and Atmospheric Administration | 21 CFR 177.1360(b) | ASTM F 34 | 1980 | Standard Test Method for Liquid Extraction of Flexible Barrier Materials | ASTM International | |
Rural Utilities Service | 7 CFR 1755.506(a) | 7 CFR 1755.700 | 2012 | Aerial service wires | Rural Utilities Service, U.S. Department of Agriculture | |
National Highway Traffic Safety Administration | 49 CFR 572.160(a)(1)(v) | LM Drawing No. 167–3010 | 2009 | Lumbar Weight Base, Revision A | Leet-Melbrook | |
National Highway Traffic Safety Administration | 49 CFR 572.143(a) | Drawing No. 9001373 | 1987 | Nylon Shoulder Bushing | Reprographic Technologies | |
National Highway Traffic Safety Administration | 49 CFR 571.5(k)(1) | NHTSA Drawing Package, NHTSA-213 | 2003 | NHTSA Standard Seat Assembly; FMVSS No. 213, (consisting of drawings and a bill of materials) | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Environmental Protection Agency | 40 CFR 136.3(a) Table ID (35) | APHA Method 6630 C | 2000 | Organochlorine Pesticides and PCBs by Liquid/Liquid Extraction and GC/ECD | American Public Health Association | |
Environmental Protection Agency | 40 CFR 143.4(b) Table (Sulfate) | ASTM D 4327 | 1997 | Inorganic Anions by Ion Chromatography | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1917.119(c) | ANSI A14.1 | 1990 | Safety Requirements for Portable Wood Ladders | American National Standards Institute | |
Environmental Protection Agency | 40 CFR 92.113 Table B113-1 | ASTM D 445 | 2009 | Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids | ASTM International | |
National Archives and Records Administration | 36 CFR 1238.20(a) | ISO 18911 | 2000 | Imaging Materials--Processed Safety Photographic Films--Storage Practices | International Organization for Standardization | |
Occupational Safety and Health Administration | 29 CFR 1926.6(dd)(7) | SAE J-237 | 1971 | Front End Loaders and Dozers | Society of Automotive Engineers | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (36) | EPA Method 1625 B | 1990 | Semivolatile Organic Compounds by Isotope Dilution GC/MS | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 141.25(a) Table Note 4 | EPA EMSL-LV-0539-17 | 1979 | Radiochemical Analytical Procedures for Analysis of Environmental Samples | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 60.17(g)(27) | ASTM D 240 | 2002 | Standard Test Method for Heat of Combustion of Liquid Hydrocarbon Fuels by Bomb Calorimeter | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1910.6(h)(26) | ASTM D 3828 | 2007 | Standard Test Methods for Flash Point by Small Scale Closed Cup Tester | ASTM International | |
Coast Guard | 46 CFR 161.002-1(b) | NFPA 72 | 1993 | National Fire Alarm Code | National Fire Protection Association | |
National Highway Traffic Safety Administration | 49 CFR 571.205(a) S5.1.1.1(d) | ASTM D 362 | 1984 | Standard Specification for Industrial Grade Toluene | ASTM International | |
Environmental Protection Agency | 40 CFR 58 Appendix E, 12.0(13) | EPA-450-3-78-013 | 1978 | Site Selection for the Monitoring of Photochemical Air Pollutants, Ludwig, F.L. and E. Shelar. | U.S. Environmental Protection Agency | |
Coast Guard | 40 CFR 60, Appendix B, PS-1, 8.2(1) | ASTM D 6216 | 1998 | Standard Practice for Opacity Monitor Manufacturers to Certify Conformance with Design and Performance Specifications | ASTM International | |
Housing and Urban Development Department | 24 CFR 200.949(a)(1)(ii) | ISDSI 100 | 1990 | Door Size Dimensional Standard and Assembly Tolerances for Insulated Steel Door Systems | Insulated Steel Door Institute | |
Research and Special Programs Administration | 49 CFR 179.200-7(f) Table | ASTM A 302/A 302M | 1993 | Standard Specification for Pressure Vessel Plates, Alloy Steel, Manganese-Molybdenum and Manganese-Molybdenum Nickel | ASTM International | |
Coast Guard | 46 CFR 38.25-3(c)(2) | ASNT RP SNT-TC-1A | 1988 | Personnel Qualification and Certification for Nondestructive Testing | American Society for Nondestructive Testing | |
Environmental Protection Agency | 40 CFR 63.3941(b)(1) | ASTM D 6093 | 1997 | Standard Test Method for Percent Volume Nonvolatile Matter in Clear or Pigmented Coatings Using a Helium Gas Pycnometer | ASTM International | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.901(a)(4) | API Bulletin 2INT-DG | 2007 | Interim Guidance for Design of Offshore Structures for Hurricane Conditions | American Petroleum Institute | |
Coast Guard | 46 CFR 148.450(d) | IMSBC Code | 2009 | International Maritime Solid Bulk Cargoes Code and Supplement | International Maritime Organization | |
Coast Guard | 46 CFR 180.10 | IMO SOLAS | 2001 | International Convention for the Safety of Life at Sea | International Maritime Organization | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (37) | TJAC Method AES 0029 | 1991 | Direct Current Plasma (DCP) Optical Emission Spectrometric Method for Trace Elemental Analysis of Water and Wastes | Thermo Jarrell Ash Corp. | |
Environmental Protection Agency | 40 CFR 141.23(k)(1) Table (10) Copper | APHA Method 3120 B | 1999 | Metals by Inductively Coupled Plasma | American Public Health Association | |
Environmental Protection Agency | 40 CFR 82, Subart F, Appendix A, Section 5.1 | ARI 700 | 1995 | Appendix C to ARI Standard 700-1995: Analytical Procedures for ARI Standard 700-1995 | Air Conditioning and Refrigeration Institute | |
Environmental Protection Agency | 40 CFR 60.204(b)(3)(ii) | AOAC Method 9 | 1970 | Official Methods of Analysis, 11th Edition | AOAC International | |
Food and Drug Administration | 21 CFR 184.1754(b) | Food Chemicals Codex | 1981 | Sodium Diacetate | National Academy Press | |
Food and Drug Administration | 21 CFR 184.1408(b)(2) | Food Chemicals Codex | 1981 | Licorice and Licorice Derivatives | National Academy Press | |
Coast Guard | 46 CFR 160.135-5(d)(5) | IMO MSC/Circular 980 | 2001 | Standardized life-saving Appliance Evaluation and Test Report Forms | International Maritime Organization | |
National Highway Traffic Safety Administration | 49 CFR 572.187(a) | Drawing No. 175-5500 | 2009 | Lumbar Spine Assembly | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IH Footnote 14 | Colilert® Method | 2013 | Colilert Test Kit | IDEXX Laboratories |