This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation Sort ascending | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Environmental Protection Agency | 40 CFR 264.1063(d)(1) | ASTM E 260 | 1985 | Standard Practice for Packed Column Gas Chromatography | ASTM International | |
Federal Motor Carrier Safety Administration | 49 CFR 393.25(b) | FMVSS 108 | 1998 | Lamps, Reflective Devices, and Associated Equipment | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Coast Guard | 46 CFR 52.01-120(d)(2) | ASME B&PV Code | 2001 | Boiler and Pressure Vessel Code, Section I, Rules for Construction of Power Boilers | American Society of Mechanical Engineers | |
Environmental Protection Agency | 40 CFR 1043.60 | IMO Publication | 2008 | International Convention on the Prevention of Pollution from Ships, MARPOL Annex VI | International Maritime Organization | |
Environmental Protection Agency | 40 CFR 136.3(b)(7)(iv)(BB) | EPA Ind-01. Method EV-024 | 1993 | Analytical Procedures for Determining Total Tin and Triorganotin in Wastewater | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 444.12(b)(1) Table (4) | EPA Method 200.8 | 1994 | Determination of Trace Elements in Water and Wastes by Inductively Coupled Plasma-Mass Spectrometry | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 86.1(g)(25) | SAE J-2534 | 2002 | Recommended Practice for Pass-Thru Vehicle Programming | Society of Automotive Engineers | |
Occupational Safety and Health Administration | 29 CFR 1910.252(a)(1) | NFPA 51B | 1962 | Standard for Fire Prevention in Use of Cutting and Welding Processes | National Fire Protection Association | |
Housing and Urban Development Department | 24 CFR 200, Appendix A | ASTM D 2321 | 1989 | Underground Installation of Thermoplastic Pipe for Sewers and Other Gravity-Flow Applications | ASTM International | |
Energy Department | 10 CFR 430 Subpart B, App. P, 3 | ANSI Z21.56 | 1994 | Gas-Fired Pool Heaters | American National Standards Institute | |
Coast Guard | 46 CFR 160.151-15(e) | Federal Standard 595C | 2008 | Colors Used in Government Procurement | General Services Administration | |
Environmental Protection Agency | 40 CFR 147.2201(a)(3)(ii) | TXUIC regulations | 1981 | Amendment to 16 TAC section 3.46 (section .051.02.02.046) issued December 21, 1981, effective April 1, 1982 | State of Texas | |
Environmental Protection Agency | 40 CFR 63.11163(g)(1)(iii) | ASME PTC 19.10 | 1981 | Flue and Exhaust Gas Analyses [part 10, Instruments and Apparatus] | American Society of Mechanical Engineers | |
Coast Guard | 21 CFR 172.615(a) | ASTM D 721 | 1956 | Tentative Method of Test for Oil Content of Petroleum Waxes | ASTM International | |
Coast Guard | 46 CFR 56.01-2(e)(66) | ASTM B 361 | 1995 | Standard Specification for Factory-Made Wrought Aluminum and Aluminum-Alloy Welding Fittings | ASTM International | |
Coast Guard | 46 CFR 56.25-10(a) | MSS SP-6 | 2001 | Standard Finishes for Contact Faces of Pipe Flanges and Connecting-End Flanges of Valves and Fittings | Manufacturers Standardization Society of the Valve and Fittings Industry | |
Public Health Service | 42 CFR 52b.12(c)(8) | NSF 49 | 1992 | Class II (Laminar Flow) Biohazard Cabinetry | National Sanitation Foundation | |
Research and Special Programs Administration | 49 CFR 195.3(c) B10 | API 1104 | 2001 | Standard for Welding Pipelines and Related Facilities | American Petroleum Institute | |
Coast Guard | 40 CFR 444.12(b)(1) Table (2) | APHA Method 3111 B | 1999 | Metals by Flame Atomic Absorption | American Public Health Association | |
Environmental Protection Agency | 40 CFR 435.15 Note 11 | EPA-821-R-11-004 | 2011 | Analytic Methods for the Oil and Gas Extraction Point Source Category | U.S. Environmental Protection Agency | |
National Highway Traffic Safety Administration | 49 CFR 572.74(a) | Drawing No. SA-6C-1610-2 | 1996 | Screw Button Head Socket | Reprographic Technologies | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IF (Chlorobenzene) | EPA Method 502.2 | 1995 | Volatile Organic Compounds (Drinking Water) by GC/PID/ELCD | U.S. Environmental Protection Agency | |
Housing and Urban Development Department | 24 CFR 3280.715(c) | UL 181A | 1994 | Standard for Safety Closure Systems for use with Rigid Air Ducts and Air Connectors with 1998 revisions | Underwriters Laboratories, Inc. | |
Research and Special Programs Administration | 49 CFR 176.11(f) | IMDG Code | 2006 | International Maritime Dangerous Goods Code | International Maritime Organization | |
Coast Guard | 46 CFR 151.50-73(a), Note | ACGIH Publication | 1987 | Guidelines for the Selection of Chemical Protective Clothing, Third Edition | American Conference of Governmental Industrial Hygienists | |
Environmental Protection Agency | 40 CFR 300.915(b)(8) | ASTM D 1293 | 1990 | Standard Test Method for Pour Point of Petroleum Oils | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1910.6(e)(64) | ANSI Z49.1 | 1967 | Safety in Welding and Cutting | American National Standards Institute | |
Coast Guard | 46 CFR 118.425(a) | UL 710 | 1990 | Exhaust Hoods for Commercial Cooking Equipment as amended through September 16, 1993 | Underwriters Laboratories, Inc. | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (87) | APHA Method 6410 B | 2000 | Base/Neutral and Acid Extractable Compounds by GC/MS | American Public Health Association | |
Environmental Protection Agency | 40 CFR 141.74(a)(2) Table (Chlorine Dioxide) | APHA Method 4500-ClO2 C | 2000 | Chlorine Dioxide, Amperometric Titration | American Public Health Association | |
Environmental Protection Agency | 40 CFR 61, Appendix E, 6(1) | EPA-520-1-89-002 | 1989 | A Guide for Determining Compliance with the Clean Air Act Standards for Radionuclides Emissions from NRC-Licensed and Non-DOE Federal Facilities | U.S. Environmental Protection Agency | |
Food and Drug Administration | 21 CFR 102.23(c)(1) | AOAC Official Methods | 1980 | Official Methods of Analysis | AOAC International | |
Food and Drug Administration | 21 CFR 184.1005(b) | Food Chemicals Codex | 1981 | Acetic Acid | National Academy Press | |
Health and Human Services Department | 45 CFR 162.920(a)(2) | ASC X12N 837 | 2002 | Addenda to Health Care Claim: Professional, Volumes 1 and 2, Version 4010 | Washington Publishing Company | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.517(h) | API RP 53 | 2004 | Recommended Practice for Blowout Prevention Equipment Systems for Drilling Wells | American Petroleum Institute | |
Environmental Protection Agency | 40 CFR 141.23(k)(1) Table (23) Silica | ASTM D 859 | 1994 | Test Methods for Silica in Water | ASTM International | |
Environmental Protection Agency | 40 CFR 60.251(d)(2) Coal | ASTM D 388 | 2004 | Standard Classification of Coals by Rank | ASTM International | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.862(e) | API RP 14C | 2001 | Recommended Practice for Analysis, Design, Installation, and Testing of Basic Surface Safety Systems for Offshore Production Platforms | American Petroleum Institute | |
Coast Guard | 29 CFR 1915.155(b)(2) | ANSI Z89.1 | 1997 | Safety Requirements for Industrial Head Protection | American National Standards Institute | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (88) | EPA Method 625 | 1982 | Base/Neutrals and Acids by GC/MS | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 141.74(a)(2) Table (Chlorine Dioxide) | APHA Method 4500-ClO2 E | 2000 | Chlorine Dioxide, Amperometric Method II | American Public Health Association | |
Environmental Protection Agency | 40 CFR 61, Appendix E, 6(2) | EPA-520-1-89-003 | 1989 | User's Guide for the COMPLY Code | U.S. Environmental Protection Agency | |
Food and Drug Administration | 21 CFR 1040.20(c)(5) | ANSI C81.10 | 1976 | Specifications for Electric Lamp Bases and Holders-Screw Shell Types | American National Standards Institute | |
Food and Drug Administration | 21 CFR 184.1007(b)(1) | Food Chemicals Codex | 1996 | Aconitic Acid | National Academy Press | |
Health and Human Services Department | 45 CFR 162.920(a)(3) | ASC X12N 837 | 2002 | Addenda to Health Care Claim: Institutional, Volumes 1 and 2, Version 4010 | Washington Publishing Company | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.618(a) | API RP 53 | 2004 | Recommended Practice for Blowout Prevention Equipment Systems for Drilling Wells | American Petroleum Institute | |
Environmental Protection Agency | 40 CFR 141.23(k)(1) Table (23) Silica | ASTM D 859 | 2000 | Test Methods for Silica in Water | ASTM International | |
Environmental Protection Agency | 40 CFR 60.251(k) Lignite | ASTM D 388 | 1977 | Standard Classification of Coals by Rank | ASTM International | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.862(e) | API RP 14G | 2007 | Recommended Practice for Fire Prevention and Control on Fixed Open-type Offshore Production Platforms | American Petroleum Institute | |
Coast Guard | 46 CFR 197.204, ASME Code | ASME B&PV Code | 2013 | Boiler and Pressure Vessel Code | American Society of Mechanical Engineers |