Official websites use .gov
A .gov website belongs to an official government organization in the United States.
Secure .gov websites use HTTPS
A lock (
) or https:// means you’ve safely connected to the .gov website. Share sensitive information only on official, secure websites.
Standards Incorporated by Reference (SIBR) Database
NOTE: This database has not been updated since August 16, 2016 and is being provided as a source for historical data. Data and information released from the Standards Incorporated by Reference databases at NIST are provided on an "AS IS" basis, without representation or warranty of any kind, including without limitation the warranties of merchantability, fitness for a particular purpose and non-infringement. Data and/or information may contain errors or be incomplete.
Use the CSV record export feature to download an export file of the data. The current search filters will be applied to the export. All pages of the current search result will be included in the export, not just the current page.
| Incorporated by (Agency) | FR Citation Sort ascending | CFR Citation | Document Number | Title of Standard | Standard Publishing Organization |
|---|---|---|---|---|---|
| Pipeline and Hazardous Materials Safety Administration | 49 CFR 171.22(a) | IAEA TS-R-1 | Regulations for the Safe Transport of Radioactive Material | International Atomic Energy Agency | |
| Housing and Urban Development Department | 24 CFR 200.945(a)(1)(iv) | ASTM D 3936 | Standard Test Method for Delamination Strength of Secondary Backing of Pile Floor Coverings | ASTM International | |
| Environmental Protection Agency | 40 CFR 89.6(c)(1) | SAE J-244 | Recommend Practice for Measurement of Intake Air or Exhaust Gas Flow of Diesel Engines | Society of Automotive Engineers | |
| Agricultural Marketing Service | 7 CFR 28.303(c) | ASTM D 1440 | Standard Test Method for Length and Length Distribution of Cotton Fiber (Array Method) | ASTM International | |
| Pipeline and Hazardous Materials Safety Administration | 49 CFR 195.307(e) | ASME B&PV Code | Boiler and Pressure Vessel Code, Section VIII, Division 1 | American Society of Mechanical Engineers | |
| Occupational Safety and Health Administration | 29 CFR 1910.6(l)(1) | CMAA Specification 1B61 | Specification for Electric Overhead Traveling Cranes | Crane Manufacturer's Association of America | |
| Occupational Safety and Health Administration | 29 CFR 1926.453(b)(5)(iv) | AWS D2.0 | Specifications for Welding Highway and Railway Bridges | American Welding Society | |
| Coast Guard | 46 CFR 164.120-5(b)(11) | ASTM D 2584 | Standard Test Method of Ignition Loss for Cured Reinforced Resins | ASTM International | |
| Environmental Protection Agency | 40 CFR 136.3(a) Table IB (24) | Kelada-01, EPA 821-B-01-009 | Kelada Automated Test Methods for Total Cyanide, Acid Dissociable Cyanide, and Thiocyanate | U.S. Environmental Protection Agency | |
| Environmental Protection Agency | 40 CFR 143.4(b) Table (Maganese) | APHA Method 3120 B | Metals by Inductively Coupled Plasma | American Public Health Association | |
| Food and Drug Administration | 21 CFR 178.3740(b) | ASTM D 445 | Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids | ASTM International | |
| Coast Guard | 46 CFR 160.077-15(e) | Federal Standard 751 | Stitches, Seams, and Stitchings | Federal Specifications Standards and Test Methods | |
| National Highway Traffic Safety Administration | 49 CFR 572.174(a) | Drawing No. 420-3000 | Upper Torso Assembly | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
| Environmental Protection Agency | 40 CFR 141.25(a) Table Note 6 | ASTM D 5673 | Standard Test Method for Elements in Water by Inductively Coupled Plasma—Mass Spectrometry | ASTM International | |
| Environmental Protection Agency | 40 CFR 60.107a(d)(4)(v) | GPA 2261 | Analysis of Natural Gas and Similar Gaseous Mixtures by Gas Chromatography | Gas Processors Association | |
| Consumer Product Safety Commission | 16 CFR 1402.4(a)(1)(i)(E)(2) | ASTM D 1535 | Specifying Color by the Munsell System | ASTM International | |
| Environmental Protection Agency | 40 CFR 58 Appendix C, 6.0(6) | AWMA Publicaltion | IMPROVE—a new remote area particulate monitoring system for visibility studies, Eldred, R.A., Cahill, T.A., Pitchford, M., and Malm, W.C.; Proceedings of the 81st Annual Meeting of the Air Pollution Control Association, Paper 88-54.3 | Air and Waste Management Association | |
| Coast Guard | 46 CFR 114.600(b) | ASTM B 152 | Standards Specification for Copper, Sheet, Strip, Plate, and Rolled Bar | ASTM International | |
| Nuclear Regulatory Commission | 10 CFR 34.20(e) | NIST Handbook 136 | Radiological Safety for the Design and Construction of Apparatus for Gamma Radiography | National Institute of Standards and Technology, U.S. Department of Commerce | |
| Coast Guard | 46 CFR 116.423(a)(3) | NFPA 701 | Fire Tests for Flame-Resistant Textiles and Films | National Fire Protection Association | |
| Environmental Protection Agency | 40 CFR 52, Subpart T | LASIP | State Implementation Plan with Regulatory and Nonregulatory Revisions | State of Louisiana | |
| Coast Guard | 46 CFR 108.655(e) | IMO Resolution A.760(18) | Symbols Related to Life-saving Appliances and Arrangements | International Maritime Organization | |
| Occupational Safety and Health Administration | 29 CFR 1910.6(h)(17) | ASTM D 93 | Test for Flash Point by Pensky Martens Closed Cup Tester | ASTM International | |
| Housing and Urban Development Department | 24 CFR 3280.4(a) | AITC All Standards | All specifications, standards and codes without specific reference | American Institute of Timber Construction | |
| Minerals Management Service | 30 CFR 250.1903 | ISO/IEC 17011 | Conformity assessment—General requirements for accreditation bodies accrediting conformity assessment bodies, First edition | International Organization for Standardization / International Electrotechnical Commission | |
| Coast Guard | 46 CFR 111.01-9(c) | IEC 60529 | Degrees of Protection Provided by Enclosures (IP Code), Edition 2.1 | International Electrotechnical Commission | |
| Research and Special Programs Administration | 49 CFR 192.7(c)(2) D2 | ASME B16.5 | Steel Pipe Flanges and Pipe Fittings | American Society of Mechanical Engineers | |
| Rural Utilities Service | 7 CFR 1755.405(c)(6) | IEEE 743 | Standard Methods and Equipment for Measuring the Transmission Characteristics of Analog Voice Frequency Circuits | Institute of Electrical and Electronics Engineers | |
| Food and Drug Administration | 21 CFR 101.83(c)(2)(ii)(A)(2) | UUSI Publication | Determination of the Sterol Content in Margerines, Halvarines, Dressings, Fat Blends and Sterol Fatty Acid Ester Concentrates by Capillary Gas Chromatography | Unilever United States, Inc. | |
| Occupational Safety and Health Administration | 29 CFR 1910.6(e)(51) | ANSI Z9.2 | Fundamentals Governing the Design and Operation of Local Exhaust Systems | American National Standards Institute | |
| Public Health Service | 42 CFR 37.51(e) | AAPM On-Line Report No. 03 | Assessment of Display Performance for Medical Imaging Systems | American Association of Physicists in Medicine | |
| National Highway Traffic Safety Administration | 49 CFR 571.5(k)(4) | NHTSA Parts List and Drawings | Ejection Mitigation Headform Drawing Package | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
| Environmental Protection Agency | 40 CFR 136.3(a) Table ID (35) | USGS O-3104-83 | Whole-water recoverable organophosphate pesticides | U.S. Geological Survey | |
| Environmental Protection Agency | 40 CFR 141.23(k)(1) Table (8) Calcium | APHA Method 3120 B | Metals by Inductively Coupled Plasma | American Public Health Association | |
| Food and Drug Administration | 21 CFR 178.3910(a)(4)(i)(C) | ASTM D 156 | Standard Method of Test for Saybolt Color of Petroleum Products (Saybolt Chromometer Method) | ASTM International | |
| Nuclear Regulatory Commission | 10 CFR 50.48(c)(1) | NFPA 805 | Performance-Based Standard for Fire Protection for Light Water Reactor Electric Generating Plants | National Fire Protection Association | |
| Occupational Safety and Health Administration | 29 CFR 1926.6(dd)(10) | SAE J-321a | Fenders for Pneumatic-Tired Earthmoving Haulage Equipment | Society of Automotive Engineers | |
| Environmental Protection Agency | 40 CFR 136.3(a) Table IC (37) | EPA Method 602 | Purgeable Aromatics by GC/PID Purge & Trap | U.S. Environmental Protection Agency | |
| Environmental Protection Agency | 40 CFR 136.3(b)(5)(iii)(M) | EPA Method 283.2 | Titanium (Atomic Absorption, Furnace Technique) | U.S. Environmental Protection Agency | |
| Environmental Protection Agency | 40 CFR 435.13 Note 11(a) | EPA-821-R-11-004 | Analytic Methods for the Oil and Gas Extraction Point Source Category | U.S. Environmental Protection Agency | |
| Environmental Protection Agency | 40 CFR 80.1426(f)(17)(i) | ASTM D 975 | Standard Specification for Diesel Fuel Oils | ASTM International | |
| Environmental Protection Agency | 40 CFR 147.1751(a)(2) | NDUIC regulations | North Dakota Century Code, Sections 61-28-02 and 61-28-06 | State of North Dakota | |
| Environmental Protection Agency | 40 CFR 63, Subpart YYYY, Table 3, (d) | ASTM D 6348 | Standard Test Method for Determination of Gaseous Compounds by Extractive Direct Interface Fourier Transform Infrared (FTIR) Spectrosco | ASTM International | |
| Environmental Protection Agency | 40 CFR 282.71(d)(1)(i)(A) | MAUSTP | Massachusetts Statutory Requirements Applicable to the Underground Storage Tank Program, Massachusetts General Laws, Chapter 148, sec. 13 Paragraph 3, sec. 38, 38A-38C, and 38E; Massachusetts General Laws, Chapter 21E, sec. 2, 3A(e) and 3(c), 4, 5, 6, 8. | Commonwealth of Massachusetts | |
| Federal Communications Commission | 47 CFR 80.1101(d)(1)(ii) | IMO Resolution A.806(19) | Performance Standards for Shipborne MF/HF Radio Installations Capable of Voice Communication, Narrow-Band Direct Printing and Digital Selective Calling | International Maritime Organization | |
| Environmental Protection Agency | 40 CFR 761.19(a)(10) | ASTM D 1796 | Standard Test Method for Water and Sediment in Fuel Oils by the Centrifuge Method (Laboratory Procedure) | ASTM International | |
| Environmental Protection Agency | 40 CFR 98.324(b)(1) | MSHA Handbook Number: PH-08-V-1 | General Coal Mine Inspection Procedures and Inspection Tracking System | Mine Safety and Health Administration, U.S. Department of Labor | |
| Coast Guard | 46 CFR 58.03-1(g)(3) | ASTM B 122/B 122M | Standard Specification for Copper-Nickel-Tin Alloy, Copper-Nickel-Zinc Alloy (Nickel Silver), and Copper-Nickel Alloy Plate, Sheet, Strip, and Rolled Bar | ASTM International | |
| Environmental Protection Agency | 40 CFR 761.60(g)(1)(ii) | ASTM D 923 | Standard Practices for Sampling Electrical Insulating Liquids | ASTM International | |
| Coast Guard | 46 CFR 105.10-15(a)(2)(Note) | ASTM D 323 | Standard Test Method for Vapor Pressure of Petroleum Products (Reid Method) | ASTM International |