Official websites use .gov
A .gov website belongs to an official government organization in the United States.
Secure .gov websites use HTTPS
A lock (
) or https:// means you’ve safely connected to the .gov website. Share sensitive information only on official, secure websites.
Standards Incorporated by Reference (SIBR) Database
If you would like to be notified when new records are added to the Standards Incorporated by Reference (SIBR) Database, please click on the button to subscribe to this weekly alert.
DISCLAIMER: Data and information released from the Standards Incorporated by Reference databases at NIST are provided on an "AS IS" basis, without representation or warranty of any kind, including without limitation the warranties of merchantability, fitness for a particular purpose and non-infringement. Data and/or information in this database may contain errors or may be incomplete. Please email standardsinfo@nist.gov if you identified missing information or incorrect information. This database is provided by NIST as a public service. Inclusion of records in this database does not represent endorsement or recommendation of standards listed by NIST.
NOTE: This database does not included records related to the Incorporation by Reference for the following: Department of Transportation, Federal Aviation Administration – Airworthiness Directives, State Air Plan Approvals, and Standard Instrumentation Approach Procedures; and the Environmental Protection Agency - State Approval of Air Quality Plans.
| Incorporated by (Agency) | FR Citation Sort ascending | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
|---|---|---|---|---|---|---|
| Federal Motor Carrier Safety Administration | 49 CFR 393.53(c) | FMVSS 121 | 1998 | Air Brake Systems | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
| Coast Guard | 46 CFR 160.151-15(f) | IMO LSA Code | 2010 | Life Saving Appliances, including LSA Code | International Maritime Organization | |
| Environmental Protection Agency | 40 CFR 1065.1010(b)(20) | ASTM D 2699 | 2013 | Standard Test Method for Research Octane Number of Spark-Ignition Engine Fuel | ASTM International | |
| Environmental Protection Agency | 40 CFR 141.74(a)(2) Table (Total Chlorine) | ASTM D 1253 | 2003 | Standard Test Method for Residual Chlorine in Water | ASTM International | |
| Environmental Protection Agency | 40 CFR 61.04(c)(1)(ii) | NH State Regulations, Env-A 1800 | 2008 | Asbestos Management and Control, Sections 1801-1807, excluding the following provisions: 1801.02(e), 1802.02, 1802.04, 1802.07-1802.09, 1802.13, 1802.15-1802.17, 1802.28-1802.29, 1802.36, 1802.42, 1802.45, 1802.50, 1802.54, 1804.05-1804.09, and 1807.02 | State of New Hampshire | |
| Food and Drug Administration | 21 CFR 165.110(a)(2)(iv) | The United States Pharmacopeia | 1995 | United States Pharmacopeia | U.S. Pharmacopeial Convention | |
| Nuclear Regulatory Commission | 10 CFR 50.55a(b)(3)(i) | NQA-1 | 1979 | Quality Assurance Requirements for Nuclear Facilities, 1979 Addenda, as permitted by ISTA 1.4 of the 1995 Edition through 1997 Addenda or ISTA-1500 of the 1998 Edition through the latest edition and addenda | American Society of Mechanical Engineers | |
| Environmental Protection Agency | 40 CFR 141.23(k)(1) Table (23) Silica | APHA Method 4500-SiO2 D | 1995 | Silica, Dissolved, Heteropoly Blue Method | American Public Health Association | |
| Environmental Protection Agency | 40 CFR 60.251(k) Lignite | ASTM D 388 | 1991 | Standard Classification of Coals by Rank | ASTM International | |
| Safety and Environmental Enforcement Bureau | 30 CFR 250.862(e) | API RP 500 | Recommended Practice for Classification of Locations for Electrical Installations at Petroleum Facilities Classified as Class I, Division 1 and Division 2 | American Petroleum Institute | ||
| Coast Guard | 46 CFR 164.018-5(a)(1) | FedSpec L-P-375C | 1970 | Plastic Film, Flexible, Vinyl Chloride | Federal Specifications Standards and Test Methods | |
| Food and Drug Administration | 21 CFR 178.3770(b)(2) | ASTM D 1386 | 1978 | Standard Test Method for Acid Number (Empirical) of Synthetic and Natural Waxes | ASTM International | |
| Coast Guard | 33 CFR 155.140(c)(2) | ASTM F 715 | 1995 | Standard Test Methods for Coated Fabrics Used for Oil Spill Control and Storage | ASTM International | |
| Rural Utilities Service | 7 CFR 1755.505(f)(13) | 7 CFR 1755.510 | 0 | Construction and assembly unit drawings | Rural Utilities Service, U.S. Department of Agriculture | |
| Rural Utilities Service | 7 CFR 1755.870(i)(2) | UL 1666 | 1991 | Test for Flame Propagation Height of Electrical and Optical Fiber Cables Installed Vertically in Shafts | Underwriters Laboratories, Inc. | |
| Pipeline and Hazardous Materials Safety Administration | 49 CFR 178.277(e)(4)(iv) | CGA S-1.2 | 1980 | Safety Release Device Standard--Cargo and Portable Tanks for Compressed Gases | Compressed Gas Association | |
| Coast Guard | 46 CFR 12.35-5 | STCW Code | 1995 | Seafarer's Training, Certification and Watchkeeping Code | International Maritime Organization | |
| National Highway Traffic Safety Administration | 49 CFR 572.111(a) | Drawing No. SA-SIDH3-M001 | 1994 | Completed Assembly Side Impact Dummy, 50th Percentile Male | Reprographic Technologies | |
| Consumer Product Safety Commission | 16 CFR 1615.32(a)(1) | AATCC 124 | 1996 | Appearance of Durable Press Fabrics After Repeated Home Laundering | American Association of Textile Chemists and Colorists | |
| National Highway Traffic Safety Administration | 49 CFR 572.120(a)(1)(ii) | Drawing No. 127-1015 | 2009 | Drawings and Specifications for the Hybrid III 6-year-old Dummy, Neck Assembly | Reprographic Technologies | |
| Coast Guard | 46 CFR 182.320(a)(3) | UL 174 | 1989 | Household Electric Storage Water Heaters | Underwriters Laboratories, Inc. | |
| National Highway Traffic Safety Administration | 40 CFR 60.632(f) | ASTM E 168 | 1977 | Standard Practices for General Techniques of Infrared Quantitative Analysis | ASTM International | |
| Environmental Protection Agency | 40 CFR 261, Appendix IX, Tables 1 and 2 | EPA Method 9040C | 2004 | pH Electrometric Measurement | U.S. Environmental Protection Agency | |
| Federal Aviation Administration | 14 CFR 36 Appendix J J36.109(d)(1)(ii) | IEC 561 | 1976 | Electro-acoustical Measuring Equipment for Aircraft Noise Certification | International Electrotechnical Commission | |
| Environmental Protection Agency | 40 CFR 136.3(a) Table IC (100) | EPA Method 604 | 1982 | Phenols by GC/FID | U.S. Environmental Protection Agency | |
| Environmental Protection Agency | 40 CFR 136.3(b)(10)(xlviii) | APHA Method 4500-SiO2 | 1997 | Silica | American Public Health Association | |
| Environmental Protection Agency | 40 CFR 799.5085(h)(1)(vi) | ASTM E 1193 | 1997 | Standard Guide for Conducting Daphnia Magna Life-Cycle Toxicity Tests | ASTM International | |
| Environmental Protection Agency | 40 CFR 98.164(b)(5)(xviii) | ISO 3171 | 1988 | Petroleum Liquids—Automatic pipeline sampling—Second Edition | International Organization for Standardization | |
| Food and Drug Administration | 21 CFR 178.3610(a) | FDA Publication | 1977 | Determination of Softening Point (Drop Method) | Food and Drug Administration, U.S. Department of Health and Human Services | |
| Consumer Product Safety Commission | 16 CFR 1615.4(f)(1) Footnote 4 | ASTM D 1776 | 1967 | Conditioning Textiles and Textile Products for Testing | ASTM International | |
| Environmental Protection Agency | 40 CFR 136.3(a) Table IB (63) | TJAC Method AES 0029 | 1991 | Direct Current Plasma (DCP) Optical Emission Spectrometric Method for Trace Elemental Analysis of Water and Wastes | Thermo Jarrell Ash Corp. | |
| Environmental Protection Agency | 40 CFR 136.3(a) Table IG (Chloroneb) | EPA Method 525.1 | 1988 | Determination of Organic Compounds in Drinking Water by Liquid-Solid Extraction and Capillary Column Gas Chromatography/Mass Spectrometry | U.S. Environmental Protection Agency | |
| Environmental Protection Agency | 40 CFR 264.552(d)(4)(iv)(F) | EPA Method 1311 | 1992 | Toxicity Characteristic Leaching Procedure (and in Basic Manual Update I) | U.S. Environmental Protection Agency | |
| Environmental Protection Agency | 40 CFR 63.1329(c)(2)(i) | ASTM D 2908 | 2011 | Standard Practice for Measuring Volatile Organic Matter in Water by Aqueous-Injection Gas Chromatography | ASTM International | |
| Occupational Safety and Health Administration | 29 CFR 1910.253(e)(5)(iii) | CGA Publication | 1957 | Standard Hose Connection Specifications | Compressed Gas Association | |
| Environmental Protection Agency | 40 CFR 761.19(a)(2) | ASTM D 129 | 1978 | Standard Test Method for Sulfur in Petroleum Products (General Bomb Method) | ASTM International | |
| Housing and Urban Development Department | 24 CFR 3280.304(b)(1) | ANSI A208.1 | 1999 | Wood Particleboard | American National Standards Institute | |
| Coast Guard | 46 CFR 175.600(b) Table | ASTM B 96 | 1993 | Standard Specification for Copper-Silicon Alloy Plate, Sheet, Strip, and Rolled Bar for General Purposes and Pressure Vessels | ASTM International | |
| Housing and Urban Development Department | 24 CFR 3285.402(c) Table 1 Note 10 | ASTM D 3953 | 1991 | Standard Specification for Strapping, Flat Steel and Seals | ASTM International | |
| Federal Motor Carrier Safety Administration | 49 CFR 393.104(e)(5)(ii) | CIA PPRS-2 | 1992 | Polypropylene Fiber Rope, 3-Strand and 8-Strand Construction | Cordage Institute | |
| Coast Guard | 46 CFR 160.176-13(r) | ASTM D 975 | 1998 | Standard Specification for Diesel Fuel Oils | ASTM International | |
| Coast Guard | 46 CFR 57.02-2(a) Table 57.02-1(a) | ASME B&PV Code | 1989 | Boiler & Pressure Vessel Code, Section IX, Welding and Brazing Qualifications | American Society of Mechanical Engineers | |
| Interior Department | 43 CFR 11.36(b)(4) | DOI NRDAM/GLE | 1999 | CERCLA Type A Natural Resource Damage Assessment Model for Great Lakes Environments, Technical Documentation | U.S. Department of the Interior | |
| Research and Special Programs Administration | 49 CFR 178.35(g) | CGA C-11 | 2001 | Recommended Practice for Inspection of Compressed Gas Cylinders at Time of Manufacture | Compressed Gas Association | |
| Housing and Urban Development Department | 24 CFR 3280.304(b)(1) | SEI/ASCE 8 | 2002 | Specification for the Design of Cold-Formed Stainless Steel Structural Members | American Iron and Steel Institute | |
| Environmental Protection Agency | 40 CFR 260.11(f)(1) | EPA-450-R-92-019 | 1992 | Screening Procedures for Estimating the Air Quality Impact of Stationary Sources | U.S. Environmental Protection Agency | |
| Safety and Environmental Enforcement Bureau | 30 CFR 250.198(g)(8) | ANSI Z88.2 | 1992 | Respiratory Protection | American National Standards Institute | |
| Environmental Protection Agency | 40 CFR 98.7(e)(9) | ASTM D 1836 | 2007 | Standard Specification for Commercial Hexanes | Society of Automotive Engineers | |
| Coast Guard | 46 CFR 160.156-11(c)(2)(i)(A) | MIL-R-21607E(SH) | 1990 | Military Specification, Resins, Polyester, Low Pressure Laminating, Fire-Retardant | U.S. Department of Defense | |
| Environmental Protection Agency | 40 CFR 136.3(a) Table IB (5) | ASTM D 5673 | 2005 | Standard Test Method for Elements in Water by Inductively Coupled Plasma--Mass Spectrometry | ASTM International |