This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation Sort ascending | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Occupational Safety and Health Administration | 29 CFR 1926.6(h)(20) | ANSI J6.5 | 1971 | Rubber Insulating Sleeves | American National Standards Institute | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (28) | APHA Method 6200 B | 1997 | Volatile Organic Compounds by Purge and Trap GC/MS | American Public Health Association | |
Environmental Protection Agency | 40 CFR 58 Appendix A, 2.6.2 | EPA-600-4-79-057 | 1979 | Technical Assistance Document for the Calibration of Ambient Ozone Monitors | U.S. Environmental Protection Agency | |
National Highway Traffic Safety Administration | 49 CFR 572.5(b) | Drawing No. SA 150 M080 | 1987 | Right leg assembly | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB Footnote 69 | EPA Method 1627 | 2011 | Kinetic Test Method for the Prediction of Mine Drainage Quality, EPA-821-R-09-002 | U.S. Environmental Protection Agency | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 192.113 | ASTM A 53/A 53M | 2004 | Standard Specification for Pipe, Steel, Black and Hot-Dipped Zinc-Coated, Welded and Seamless | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1910.6(u)(4) | SAE J-397 | 1988 | Deflection Limiting Volume-ROPS/FOPS Laboratory Evaluation | Society of Automotive Engineers | |
Occupational Safety and Health Administration | 29 CFR 1910.269 Appendix G | ASTM F 1117 | 2008 | Standard Specification for Dielectric Footwear | ASTM International | |
Food and Drug Administration | 21 CFR 165.110(b)(4)(iii)(E)(13)(ii) | EPA-600-4-91-010 | 1991 | Method 200.8--Determination of Trace Elements in Water and Wastes by Inductively-Coupled Plasma-Mass Spectrometry | U.S. Environmental Protection Agency | |
Research and Special Programs Administration | 49 CFR 179.102-1(a)(1) | ASTM A 516/A 516M | 1990 | Standard Specification for Pressure Vessel Plates, Carbon Steel, for Moderate and Lower-Temperature Service | ASTM International | |
National Highway Traffic Safety Administration | 49 CFR 572.31(a)(3) | Drawing No. 78051-218 | 1998 | Hybrid III Anthropomorphic Test Dummy, Revision U | General Motors Corporation | |
Energy Department | 10 CFR 430 Subpart B, App. Q, 1.15 | ANSI C82.2 | 2002 | Fluorescent Lamp Ballasts--Methods of Measurement | American National Standards Institute | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 192.7(c)(2) B6 | API RP 1162 | 2003 | Public Awareness Programs for Pipeline Operators | American Petroleum Institute | |
Coast Guard | 46 CFR 160.176-13(y)(2) | ASTM D 751A | 1965 | Standard Test Methods for Coated Fabrics | ASTM International | |
Coast Guard | 46 CFR 170.270(c)(3) | ASTM F 1196 | 1994 | Standard Specification for Sliding Watertight Door Assemblies | ASTM International | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (33) | TJAC Method AES 0029 | 1991 | Direct Current Plasma (DCP) Optical Emission Spectrometric Method for Trace Elemental Analysis of Water and Wastes | Thermo Jarrell Ash Corp. | |
Environmental Protection Agency | 40 CFR 141.23(k)(1) Table (8) Calcium | ASTM D 6919 | 2003 | Determination of Dissolved Alkali and Alkaline Earth Cations and Ammonium in Water and Wastewater by Ion Chromatography | ASTM International | |
Environmental Protection Agency | 40 CFR 435.13 Note 3 | EPA Method 1617 | 2015 | Static Sheen Test | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 80.46(d) | ASTM D 86 | 2012 | Standard Test Method for Distillation of Petroleum Products at Atmospheric Pressure | ASTM International | |
Rural Utilities Service | 7 CFR 1755.702(i)(2) | ICEA S-89-648 | 1993 | Standard for Telecommunications Aerial Service Wire, Technical Requirements | Insulated Cable Engineers Association | |
Environmental Protection Agency | 40 CFR 136.3(b)(7)(x) | EPA-821-R-02-014 | 2002 | Short-term Methods for Estimating the Chronic Toxicity of Effluents and Receiving Waters to Marine and Estuarine Organisms, Third Edition | U.S. Environmental Protection Agency | |
Federal Aviation Administration | 14 CFR 152, Appendix B(a) | 150/5320-12 | 1975 | Methods for the Design, Construction, and Maintenance of Skid Resistant Airport Pavement Surfaces | Federal Aviation Administration, U.S. Department of Transportation | |
Coast Guard | 46 CFR 160.133-5(b)(3) | ASTM A 313/A 313M | 2008 | Standard Specification for Stainless Steel Spring Wire | ASTM International | |
National Highway Traffic Safety Administration | 49 CFr 572.181 Table A | Drawing No. 175-4000 | 2009 | Thorax Assembly with Rib Extensions | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Environmental Protection Agency | 40 CFR 136.3(b)(5)(iii) | EPA-600-4-79-020 | 1983 | Methods for Chemical Analysis of Water and Wastes | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 147.400(a)(2) | DEUIC regulations | 1983 | State of Delaware Regulations Governing Underground Injection Control, parts 122, 124 and 146 (Department of Natural Resources and Environmental Control) | State of Delaware | |
Housing and Urban Development Department | 24 CFR 200, Appendix A | UM Bulletin 62a | 1972 | Factory-Applied Laminated Roofing Systems Based on Chlorosulfonated Polyethylene (CPSE) | U.S. Department of Housing and Urban Development | |
Environmental Protection Agency | 40 CFR 63, Subpart ZZZZ, Table 4, (3)(a)(v)(1) | ASTM D 6522 | 2000 | Standard Test Method for Determination of Nitrogen Oxides, Carbon Monoxide, and Oxygen Concentrations in Emissions from Natural Gas-Fired Reciprocating Engines, Combustion Turbines, Boilers, and Process Heaters Using Portable Analyzers | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1918.24(g)(3) | ANSI A14.5 | 1992 | Safety Requirements for Portable Reinforced Plastic Ladders | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1910 Subpart L Appendix B 1910.160 | ANSI/NFPA 12B | 2014 | Halon 1211 Systems | National Fire Protection Association | |
Coast Guard | 33 CFR 154, Appendix A, 3.2 | ANSI B16.5 | 1979 | Pipe Flanges and Flanged Fittings | American National Standards Institute | |
Environmental Protection Agency | 40 CFR 76.4(b)(2) | ASTM D 3172 | 1989 | Standard Practice for Proximate Analysis of Coal and Coke | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1910 Subpart S Appendix A | NFPA 101 | 2006 | Life Safety Code | National Fire Protection Association | |
Coast Guard | 46 CFR 160.031-1(a)(1) | FedSpec T-R-605B | 1963 | Rope, Manila, and Sisal with 1973 Amendment 3 | Federal Specifications Standards and Test Methods | |
Coast Guard | 46 CFR 182.415(c)(2) | SAE J-1928 | 1989 | Devices Providing Backfire Flame Control for Gasoline Engines in Marine Applications | Society of Automotive Engineers | |
Occupational Safety and Health Administration | 29 CFR 1910 Subpart S Appendix A | ANSI/ASME B30.16 | 2003 | Overhead Hoists (Under-hung) | ASTM International | |
Minerals Management Service | 30 CFR 250.1004(b)(9) | API RP 14C | 2007 | Recommended Practice for Analysis, Design, Installation, and Testing of Basic Surface Safety Systems for Offshore Production Platforms | American Petroleum Institute | |
Coast Guard | 46 CFR 56.01-2(e)(74) | ASTM F 1123 | 2010 | Standard Specification for Non-Metallic Expansion Joints | ASTM International | |
Coast Guard | 46 CFR 10.225(b)(3)(iv) | STCW Convention | 1995 | STCW--International Convention on Standards of Training, Certification and Watchkeeping for Seafarers | International Maritime Organization | |
National Highway Traffic Safety Administration | 49 CFR 572.15(b) | Drawing No. SA 103C 010 | 1976 | Head Assembly | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Environmental Protection Agency | 40 CFR 136.3(a) Table ID (52) | EPA Method 622 | 1993 | Organophosphorus Pesticides by Liquid/Liquid Extraction and GC/NPD | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 141.40(a)(3) Table 1 (1,2,3-trichloropropane) | EPA Method 524.3 | 2009 | Measurement of Purgeable Organic Compounds in Water by Capillary Column Gas Chromatography/Mass Spectrometry | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 60.4900(b)(5)(i) | ASME PTC 19.10 | 1981 | Flue and Exhaust Gas Analyses [part 10, Instruments and Apparatus] | American Society of Mechanical Engineers | |
Food and Drug Administration | 21 CFR 177.1670(b) | ASTM F 34 | 1980 | Standard Test Method for Liquid Extraction of Flexible Barrier Materials | ASTM International | |
Environmental Protection Agency | 40 CFR 87.1, Characteristic level | ICAO Annex 16 | 2008 | Environmental Protection, Volume II—Aircraft Engine Emissions, Third Edition | International Civil Aviation Organization | |
Nuclear Regulatory Commission | 10 CFR 50.55a(g)(4)(i) | NRC Regulatory Guide 1.147 | 2010 | Inservice Inspection Code Case Acceptability, ASME Section XI, Division 1, Revision 16 | U.S. Nuclear Regulatory Commission | |
Occupational Safety and Health Administration | 29 CFR 1926.1433(b)(1) | ANSI B30.5, 5-1.1.1 | 2004 | Safety Code for Crawler, Locomotive and Truck Cranes, Load Ratings—Where Stability Governs Lifting Performance”), paragraphs (a)-(d) (including subparagraphs) | American National Standards Institute | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (57) | EPA Method 602 | 1982 | Purgeable Aromatics by GC/PID Purge & Trap | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 60, Appendix A-8, Method 29, Section 18.0, Table 29-3 | EPA Method 7040 | 1986 | Test Methods for Evaluating Solid Waste, Physical/Chemical Methods, SW-846 Third Edition | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 52, Subpart TT | UTSIP | 1979 | State Implementation Plan with Regulatory and Nonregulatory Revisions | State of Utah |