Official websites use .gov
A .gov website belongs to an official government organization in the United States.
Secure .gov websites use HTTPS
A lock (
) or https:// means you’ve safely connected to the .gov website. Share sensitive information only on official, secure websites.
Standards Incorporated by Reference (SIBR) Database
If you would like to be notified when new records are added to the Standards Incorporated by Reference (SIBR) Database, please click on the button to subscribe to this weekly alert.
DISCLAIMER: Data and information released from the Standards Incorporated by Reference databases at NIST are provided on an "AS IS" basis, without representation or warranty of any kind, including without limitation the warranties of merchantability, fitness for a particular purpose and non-infringement. Data and/or information in this database may contain errors or may be incomplete. Please email standardsinfo@nist.gov if you identified missing information or incorrect information. This database is provided by NIST as a public service. Inclusion of records in this database does not represent endorsement or recommendation of standards listed by NIST.
NOTE: This database does not included records related to the Incorporation by Reference for the following: Department of Transportation, Federal Aviation Administration – Airworthiness Directives, State Air Plan Approvals, and Standard Instrumentation Approach Procedures; and the Environmental Protection Agency - State Approval of Air Quality Plans.
| Incorporated by (Agency) | FR Citation Sort descending | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
|---|---|---|---|---|---|---|
| Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(39) | API MPMS | Chapter 11.1—Volume Correction Factors, Volume 1, Table 5A—Generalized Crude Oils and JP-4 Correction of Observed API Gravity to API Gravity at 60 °F, and Table 6A—Generalized Crude Oils and JP-4 Correction of Volume to 60 °F Against API Grav... | American Petroleum Institute | |
| Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(55) | API MPMS | Chapter 21—Flow Measurement Using Electronic Metering Systems, Section 2—Electronic Liquid Volume Measurement Using Positive Displacement and Turbine Meters | American Petroleum Institute | |
| Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(72) | API RP 14J | Recommended Practice for Design and Hazards Analysis for Offshore Production Facilities | American Petroleum Institute | |
| Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(88) | ANSI/API Spec. 16A | Specification for Drill-through Equipment | American Petroleum Institute | |
| Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(g)(2) | ASTM C 94/C 94M-07 | Standard Specification for Ready-Mixed Concrete | ASTM International | |
| Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(a)(2) | ACI 318R-95 | Commentary on Building Code Requirements for Reinforced Concrete | American Concrete Institute | |
| Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(8) | API MPMS | Chapter 2—Tank Calibration | American Petroleum Institute | |
| Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(24) | API MPMS | Chapter 5—Metering | American Petroleum Institute | |
| Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(40) | API MPMS | Chapter 11.2.2—Compressibility Factors for Hydrocarbons: 0.350-0.637 Relative Density (60 °F/60 °F) and −50 °F to 140 °F Metering Temperature | American Petroleum Institute | |
| Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(56) | API MPMS | Chapter 21—Flow Measurement Using Electronic Metering Systems, Addendum to Section 2—Flow Measurement Using Electronic Metering Systems, Inferred Mass | American Petroleum Institute | |
| Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(73) | API RP 17H | Remotely Operated Tools and Interfaces on Subsea Production Systems | American Petroleum Institute | |
| Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(89) | ANSI/API Spec. 16C | Specification for Choke and Kill Systems | American Petroleum Institute | |
| Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(g)(3) | ASTM C 150-07 | Standard Specification for Portland Cement | ASTM International | |
| Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(a)(3) | ACI 357R-84 | Guide for the Design and Construction of Fixed Offshore Concrete Structures | American Concrete Institute | |
| Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(9) | API MPMS | Chapter 2—Tank Calibration | American Petroleum Institute | |
| Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(25) | API MPMS | Chapter 5—Metering | American Petroleum Institute | |
| Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(41) | API MPMS | Chapter 11—Physical Properties Data, Section 1—Temperature and Pressure Volume Correction Factors for Generalized Crude Oils, Refined Products and Lubricating Oils | American Petroleum Institute | |
| Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(57) | API RP 2A-WSD | Recommended Practice for Planning, Designing and Constructing Fixed Offshore Platforms—Working Stress Design | American Petroleum Institute | |
| Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(74) | API RP 65 | Recommended Practice for Cementing Shallow Water Flow Zones in Deepwater Wells | American Petroleum Institute | |
| Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(90) | API Spec. 16D | Specification for Control Systems for Drilling Well Control Equipment and Control Systems for Diverter Equipment | American Petroleum Institute | |
| Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(g)(4) | ASTM C 330-05 | Standard Specification for Lightweight Aggregates for Structural Concrete | ASTM International | |
| Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(b)(1) | AGA Report No. 7 | Measurement of Natural Gas by Turbine Meters | American Gas Association | |
| Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(10) | API MPMS | Chapter 3—Tank Gauging | American Petroleum Institute | |
| Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(26) | API MPMS | Chapter 6—Metering Assemblies, Section 1—Lease Automatic Custody Transfer (LACT) Systems | American Petroleum Institute | |
| Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(42) | API MPMS | Chapter 11—Physical Properties Data, Addendum to Section 2, Part 2—Compressibility Factors for Hydrocarbons, Correlation of Vapor Pressure for Commercial Natural Gas Liquids | American Petroleum Institute | |
| Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(58) | API RP 2D | Operation and Maintenance of Offshore Cranes | American Petroleum Institute | |
| Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(59) | API RP 2FPS | RP for Planning, Designing, and Constructing Floating Production Systems | American Petroleum Institute | |
| Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(75) | API RP 75 | Recommended Practice for Development of a Safety and Environmental Management Program for Offshore Operations and Facilities | American Petroleum Institute | |
| Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(91) | ANSI/API Spec. 17D | Design and Operation of Subsea Production Systems—Subsea Wellhead and Tree Equipment | American Petroleum Institute | |
| Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(g)(5) | ASTM C 595-08 | Standard Specification for Blended Hydraulic Cements | ASTM International | |
| Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(b)(2) | AGA Report No. 9 | Measurement of Gas by Multipath Ultrasonic Meters Second Edition | American Gas Association | |
| Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(11) | API MPMS | Chapter 3—Tank Gauging | American Petroleum Institute | |
| Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(27) | API MPMS | Chapter 6—Metering Assemblies, Section 6—Pipeline Metering Systems | American Petroleum Institute | |
| Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(43) | API MPMS | Chapter 12—Calculation of Petroleum Quantities, Section 2—Calculation of Petroleum Quantities Using Dynamic Measurement Methods and Volumetric Correction Factors, Part 1—Introduction | American Petroleum Institute | |
| Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(60) | API RP 2I | In-Service Inspection of Mooring Hardware for Floating Structures; Third Edition | American Petroleum Institute | |
| Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(76) | API RP 86 | API Recommended Practice for Measurement of Multiphase Flow; First Edition | American Petroleum Institute | |
| Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(92) | ANSI/API Spec. 17J | Specification for Unbonded Flexible Pipe | American Petroleum Institute | |
| Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(h)(1) | AWS D1.1:2000 | Structural Welding Code—Steel | American Welding Society | |
| Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(b)(3) | AGA Report No. 10 | Speed of Sound in Natural Gas and Other Related Hydrocarbon Gases | American Gas Association | |
| Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(12) | API MPMS | Chapter 4—Proving Systems | American Petroleum Institute | |
| Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(28) | API MPMS | Chapter 6—Metering Assemblies, Section 7—Metering Viscous Hydrocarbons | American Petroleum Institute | |
| Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(44) | API MPMS | Chapter 12—Calculation of Petroleum Quantities, Section 2—Calculation of Petroleum Quantities Using Dynamic Measurement Methods and Volumetric Correction Factors, Part 2—Measurement Tickets | American Petroleum Institute | |
| Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(61) | ANSI/API RP 2N | “Recommended Practice for Planning, Designing, and Constructing Structures and Pipelines for Arctic Conditions” | American Petroleum Institute | |
| Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(77) | API RP 90 | Annular Casing Pressure Management for Offshore Wells | American Petroleum Institute | |
| Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(93) | ANSI/API Spec. Q1 | Specification for Quality Management System Requirements for Manufacturing Organizations for the Petroleum and Natural Gas Industry | American Petroleum Institute | |
| Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(h)(2) | AWS D1.4-98 | Structural Welding Code—Reinforcing Steel | American Welding Society | |
| Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(c)(1) | ANSI/AISC 360-05 | Specification for Structural Steel Buildings | American National Standards Institute | |
| Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(13) | API MPMS | Chapter 4—Proving Systems | American Petroleum Institute | |
| Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(29) | API MPMS | Chapter 7—Temperature Determination, | American Petroleum Institute | |
| Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(45) | API MPMS | Chapter 12—Calculation of Petroleum Quantities, Section 2—Calculation of Petroleum Quantities Using Dynamic Measurement Methods and Volumetric Correction Factors,Part 3—Proving Reports | American Petroleum Institute |