Official websites use .gov
A .gov website belongs to an official government organization in the United States.
Secure .gov websites use HTTPS
A lock (
) or https:// means you’ve safely connected to the .gov website. Share sensitive information only on official, secure websites.
Standards Incorporated by Reference (SIBR) Database
If you would like to be notified when new records are added to the Standards Incorporated by Reference (SIBR) Database, please click on the button to subscribe to this weekly alert.
DISCLAIMER: Data and information released from the Standards Incorporated by Reference databases at NIST are provided on an "AS IS" basis, without representation or warranty of any kind, including without limitation the warranties of merchantability, fitness for a particular purpose and non-infringement. Data and/or information in this database may contain errors or may be incomplete. Please email standardsinfo@nist.gov if you identified missing information or incorrect information. This database is provided by NIST as a public service. Inclusion of records in this database does not represent endorsement or recommendation of standards listed by NIST.
NOTE: This database does not included records related to the Incorporation by Reference for the following: Department of Transportation, Federal Aviation Administration – Airworthiness Directives, State Air Plan Approvals, and Standard Instrumentation Approach Procedures; and the Environmental Protection Agency - State Approval of Air Quality Plans.
| Incorporated by (Agency) | FR Citation Sort descending | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
|---|---|---|---|---|---|---|
| Federal Aviation Administration | 14 CFR 150 Appendix A A150.5(a) | IEC 179 | 1973 | Precision Sound Level Meters | International Electrotechnical Commission | |
| Pipeline and Hazardous Materials Safety Administration | 49 CFR 171.23 | TDG Regulations | 2005 | Transportation of Dangerous Goods Regulations | Canadian Department of Transportation, Transport Canada | |
| Architectural and Transportation Barriers Compliance Board | 36 CFR 1191, App D, 404.3 | BHMA A156.19 | 1997 | Power Assist and Low Energy Power Operated Doors | Builders Hardware Manufacturers Association | |
| Food and Drug Administration | 21 CFR 177.1040(c) Footnote 3 | ASTM D 1434 | 1982 | Standard Method for Determining Gas Permeability Characteristics of Plastic Film and Sheeting | ASTM International | |
| Drug Enforcement Administration | 21 CFR 1311.08(b)(7) | NIST Special Publication 800-76-1 | 2007 | Biometric Data Specification for Personal Identity Verification; Wilson, C. et al. | National Institute of Standards and Technology, U.S. Department of Commerce | |
| Coast Guard | 40 CFR 60.335(a)(1) | EPA Method 20 | 1986 | Source Assessment Sampling System (SASS) | U.S. Environmental Protection Agency | |
| Environmental Protection Agency | 40 CFR 75.6(a)(13) | ASTM D 1826 | 1994 | Standard Test Method for Calorific (Heating) Value of Gases in Natural Gas Range by Continuous Recording Calorimeter | ASTM International | |
| Coast Guard | 46 CFR 160.151-5(d)(4) | IMO Revised recommendation on testing | 2010 | Life-Saving Appliances, including LSA Code, Revised recommendation on testing of life-saving appliances | International Maritime Organization | |
| Coast Guard | 46 CFR 164.120-7, Table 164.120-7(d)(5)(i) | ISO 14125:1998(E) | 1998 | Fibre-reinforced plastic composites—Determination of flexural properties, First Edition | International Organization for Standardization | |
| Environmental Protection Agency | 40 CFR 136.3(a) Table IB (32) | ASTM D 4190 | 2008 | Metals by Direct Current Plasma | ASTM International | |
| Environmental Protection Agency | 40 CFR 141.23(k)(1) Table (6) Beryllium | EPA Method 200.9 | 0 | Metals by Graphite Atomic Absorption | U.S. Environmental Protection Agency | |
| Environmental Protection Agency | 40 CFR 80.580(c)(1)(i) | ASTM D 5453 | 2012 | Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Motor Fuels and Oils by Ultraviolet Fluorescence | ASTM International | |
| Minerals Management Service | 30 CFR 250.1900 | API RP 75 | 2008 | Development of a Safety and Environmental Management Program for Offshore Operations and Facilities | American Petroleum Institute | |
| Occupational Safety and Health Administration | 29 CFR 1910.66 Appendix D (c)(22)(i) | ANSI A120.1 | 1970 | Safety Code for Powered Platforms for Exterior Building Maintenance | American National Standards Institute | |
| Energy Department | 10 CFR 440 Appendix A | ASTM C 549 | 1986 | Perlite Loose Fill Insulation | ASTM International | |
| Coast Guard | 46 CFR 160.132-7(a)(2) | IMO Revised recommendation on testing | 2010 | Life-Saving Appliances, including LSA Code, Revised recommendation on testing of live-saving appliances | International Maritime Organization | |
| National Highway Traffic Safety Administration | 49 CFR 572.180(a)(2)(xiii) | Drawing No. 175-8000 | 2009 | Neoprene Body Suit | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
| Environmental Protection Agency | 40 CFR 136.3(b)(3)(i)(H) | EPA Method 375.2 | 1993 | Determination of Sulfate by Automated Colorimetry. Revision 2.0 | U.S. Environmental Protection Agency | |
| Environmental Protection Agency | 40 CFR 435.11(t) | EPA Method 1674 | 0 | Determination of the Amount of Non-Aqueous Drilling Fluid (NAF) Base Fluid from Drill Cuttings by a Retort Chamber (Derived from API Recommended Practice 13B-2) | U.S. Environmental Protection Agency | |
| Environmental Protection Agency | 40 CFR 63.5935 Corrosion-resistant industry standard | ASTM D 2996 | 0 | Standard Specification for Filament-Wound, Fiberglass, (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe | ASTM International | |
| Coast Guard | 40 CFR 1065.705(b)(2) | IP-500 | 2003 | Determination of the phosphorus content of residual fuels by ultra-violet spectrometry | Energy Institute | |
| Coast Guard | 40 CFR 136.3(a) Table IB (6) | EPA Method 206.5 | 1978 | Arsenic Digestion | U.S. Environmental Protection Agency | |
| Environmental Protection Agency | 40 CFR 147.250(a)(2) | CAUIC regulations | 1988 | California Laws for Conservation of Petroleum and Gas, California Public Resources Code Div. 3, Chapt. 1, §§ 3000-3359 | State of California | |
| Coast Guard | 33 CFR 96.220(b) | IMO Resolution A.741(18) | 1993 | International Management Code for the Safe Operation of Ships and for Pollution Prevention | International Maritime Organization | |
| Research and Special Programs Administration | 10 CFR 440 Appendix A | ASME B&PV Code | 1992 | Boiler and Pressure Vessel Code, Section X | American Society of Mechanical Engineers | |
| Environmental Protection Agency | 40 CFR 52.742(a)(2) | ASTM D 2369 | 1987 | Standard Test Method for Volatile Content of Coatings | ASTM International | |
| Environmental Protection Agency | 40 CFR 87.8(b)(1) | ICAO Annex 16 | 2008 | Environmental Protection, Volume II—Aircraft Engine Emissions, Third Edition | Society of Automotive Engineers | |
| Health and Human Services Department | 45 CFR 162.920(b)(2) | NCPDP Publication | 2000 | Batch Standard Batch Implementation Guide, Version 1, Release 1 (Version 1.1) | National Council for Prescription Drug Programs | |
| Research and Special Programs Administration | 40 CFR 136.3(a) Table IB (18) | EPA Method 218.6 | 1994 | Dissolved Hexavalent Chromium by Ion Chromatography, Revision 3.3 | U.S. Environmental Protection Agency | |
| Coast Guard | 46 CFR 182.420(b) | ABYC P-4 | 1989 | Marine Inboard Engines | American Boat and Yacht Council | |
| National Highway Traffic Safety Administration | 49 CFR 571.213 S6.3.1 | ASTM D 1564 | 1971 | Standard Method of Testing Flexible Cellular Materials--Slab Urethane Foam | ASTM International | |
| Food and Drug Administration | 21 CFR 177.1360(c) | ASTM F 34 | 1980 | Standard Test Method for Liquid Extraction of Flexible Barrier Materials | ASTM International | |
| Coast Guard | 46 CFR 71.15-5(b) | Lloyd's Publication | 1998 | Rules and Regulations for the Classification of Ships | Lloyd's Register of Shipping | |
| National Highway Traffic Safety Administration | 49 CFR 571.108 S5.2 (10) | UNECE Regulation 48 | 1996 | Uniform Provisions Concerning the Approval of Vehicles with Regard to the Installation of Lighting and Light-Signaling Devices | United Nations | |
| Environmental Protection Agency | 40 CFR 136.3(a) Table ID (46) | USGS O-1126-95 | 1995 | Methods of Analysis by the U.S. Geological Survey National Water Quality Laboratory - Determination of Pesticides in Water by C-18 SPE and Capillary-Column GC-MS with Select-Ion Monitoring | U.S. Geological Survey | |
| Environmental Protection Agency | 40 CFR 60.644(b)(3) | ASTM E 260 | 1973 | Standard Practice for Packed Column Gas Chromatography | ASTM International | |
| Nuclear Regulatory Commission | 10 CFR 50.55a(f)(4)(ii) | ASME B&PV Code | 2004 | Boiler and Pressure Vessel Code, Section XI | American Society of Mechanical Engineers | |
| Occupational Safety and Health Administration | 29 CFR 1926.200(c)(3) | ANSI Z535.1 | 2011 | Safety Colors | American National Standards Institute | |
| Environmental Protection Agency | 40 CFR 136.3(a) Table IC (53) | EPA Method 604 | 1982 | Phenols by GC/FID | U.S. Environmental Protection Agency | |
| Environmental Protection Agency | 40 CFR 141.25(a) Table | USGS R-1182-76 | 1977 | Uranium, dissolved, isotopic ratios. Alpha spectrometry~hemical separation | U.S. Geological Survey | |
| Environmental Protection Agency | 40 CFR 60, Appendix A-8, Method 29, Section 17.0(4) | EPA Method 5 | 1991 | Determination of particulate matter emissions from stationary sources | U.S. Environmental Protection Agency | |
| Safety and Environmental Enforcement Bureau | 30 CFR 250.901(a)(4) | API Bulletin 2INT-DG | Interim Guidance for Design of Offshore Structures for Hurricane Conditions | American Petroleum Institute | ||
| Coast Guard | 46 CFR 160.174-9(d) | Federal Standard 751A | 1965 | Stitches, Seams, and Stitchings | Federal Specifications Standards and Test Methods | |
| Environmental Protection Agency | 40 CFR 141.23(k)(1) Table (15) Magnesium | APHA Method 3111 B | 1995 | Metals by Flame Atomic Absorption | American Public Health Association | |
| Coast Guard | 46 CFR 56.01-2(e)(76) | ASTM F 1172 | 2010 | Fuel Oil Meters of the Volumetric Positive Displacement Type | ASTM International | |
| Federal Communications Commission | 47 CFR 80.1101(d)(2)(i) | ITU-R Recommendations | 0 | Recommendations of the ITU-R, Volume 5, Series Parts 3, 4, and 5 | International Telecommunication Union Radiocommunication Bureau | |
| Rural Utilities Service | 7 CFR 1755.860(n)(2) | ASTM D 4565 | 1990 | Standard Test Method for Physical and Environmental Performance Properties of Insulations and Jackets for Telecommunication Wire and Cable | ASTM International | |
| Pipeline and Hazardous Materials Safety Administration | 49 CFR 178.45(h) | ASTM E 213 | 1998 | Standard Practice for Ultrasonic Examination of Metal Pipe and Tubing | ASTM International | |
| Federal Aviation Administration | 14 CFR 152.11(a) | 150/5370-11 | 1976 | Use of Nondestructive Testing Devices in the Evaluation of Airport Pavements | Federal Aviation Administration, U.S. Department of Transportation | |
| National Archives and Records Administration | 36 CFR 1238.14(d)(1)(i) | AIIM MS23 | 1998 | Standard Recommended Practice--Production, Inspection, and Quality Assurance of First-Generation, Silver Microforms of Documents | Association for Information and Image Management |