This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation Sort descending | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Labor Department | 41 CFR 50-204.72 | AWS A6.0 | 1965 | Safe Practices for Welding and Cutting Containers That Have Held Combustibles | American Welding Society | |
Research and Special Programs Administration | 49 CFR 195.3(c) C1 | ASME B16.9 | 2004 | Factory Made Wrought Steel Buttwelding Fittings | American Society of Mechanical Engineers | |
Coast Guard | 46 CFR 175.600(b) Table | ASTM D 635 | 1997 | Standard Test Method for Rate of Burning and/or Extent and Time of Burning of Plastics in a Horizontal Position | ASTM International | |
Energy Department | 10 CFR 430 Subpart B, App. M, 3.9, f | ASHRAE 37 | 2005 | Method of Testing for Rating Unitary Air Conditioning and Heat Pump Equipment | American Society of Heating, Refrigerating and Air Conditioning Engineers | |
National Highway Traffic Safety Administration | 49 CFR 572.36(e) | Drawing No. 78051-218 | 1987 | Hybrid III Anthropomorphic Test Dummy, Revision T | General Motors Corporation | |
Environmental Protection Agency | 40 CFR 136.3(a) Table ID (70) | EPA Method 508 | 1995 | Determination of Chlorinated Pesticides in Water by Gas Chromatography with an Electron Capture Detector - Revision 3.1 | U.S. Environmental Protection Agency | |
Food and Drug Administration | 21 CFR 801.410(d)(2) | ASTM D 412 | 1968 | Standard Test Methods for Vulcanized Rubber and Thermoplastic Elastomers-Tension | ASTM International | |
Research and Special Programs Administration | 49 CFR 173.417(a)(3)(i) | ANSI N14.1 | 1987 | Packaging of Uranium Hexafluoride for Transport | American National Standards Institute | |
Coast Guard | 46 CFR 71.15-5(b) | ABS Publication | 1996 | U.S. Supplement to ABS Rules for Steel Vessels for Vessels of International Voyages | American Bureau of Shipping | |
Coast Guard | 46 CFR 27.102(b) | SAE J-1942 | 1998 | Hose and Hose Assemblies for Marine Applications | Society of Automotive Engineers | |
Occupational Safety and Health Administration | 29 CFR 1915.5(d)(1)(iii) | ANSI B7.1 | 1964 | Safety Code for the Use, Care and Protection of Abrasive Wheels | American National Standards Institute | |
Coast Guard | 46 CFR 114.600(b) | NFPA 261 | 1994 | Test For Determining Resistance of Mock-up Upholstered Furniture Material Assemblies to Ignition by Smoldering Cigarettes | National Fire Protection Association | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (79) | EPA Method 1625 | 1984 | Semivolatile Organic Compounds by Isotope Dilution GC/MS | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 141.74(a)(1) Table (Turbidity) | HCC Method 10133 | 2000 | Determination of Turbidity by Laser Nephelometry, Revision 2.0 | Hach Chemical Company | |
Environmental Protection Agency | 40 CFR 61, Appendix B, Method 114, 5(5) | APHA Method 608 | 2015 | Tentative Method of Analysis for Strontium90 Content of Atmospheric Particulate Matter | American Public Health Association | |
Federal Trade Commission | 16 CFR 460.5(b) | ASTM C 1371 | 2004 | Standard Test Method for Determination of Emittance of Materials Near Room Temperature Using Portable Emissometers | ASTM International | |
Food and Drug Administration | 21 CFR 173.395(d) | AOAC Official Methods | 1980 | Official Methods of Analysis | AOAC International | |
Housing and Urban Development Department | 24 CFR 3280.604(b)(2) | ASME A119.19.10 | 1994 | Dual Flush Devices for Water Closets | American Society of Mechanical Engineers | |
Labor Department | 41 CFR 50-204.75 | 49 CFR 397 | 2013 | Transportation of Hazardous Materials; Driving and Parking Rules | Federal Motor Carrier Safety Administration, Department of Transportation | |
Environmental Protection Agency | 40 CFR 141.23(k)(1) Table (20) Ortho-phosphate | APHA Method 4500-P E | 1998 | Phosphorus, ascorbic acid method | American Public Health Association | |
Environmental Protection Agency | 40 CFR 60.17(g)(176) | ASTM D 5865 | 2010 | Standard Test Method for Gross Calorific Value of Coal and Coke | ASTM International | |
Environmental Protection Agency | 40 CFR 194.22(b) | ASME NQA-2a | 1990 | Addenda, part 2.7, to ASME NQA-2-1989 edition Quality Assurance Requirements for Nuclear Facility Applications | American Society of Mechanical Engineers | |
Housing and Urban Development Department | 24 CFR 3280.604(b)(2) | ASTM D 2846 | 1992 | Chlorinated-Poly-Vinyl-Chloride (CPVC) Plastic Hot- and Cold-Water Distribution Systems | ASTM International | |
Environmental Protection Agency | 40 CFR 147.2000(a)(1) | RIUIC regulations | 1983 | Rhode Island Gen. Laws sections 46-12-1, 46-12-5, and 46-12-28 (Supp. 1983) | State of Rhode Island | |
Rural Utilities Service | 7 CFR 1755.890(i)(4)(ii) | ICEA S-84-608 | 1988 | Standard for Telecommunications Cable, Filed, Polyolefin Insulated, Copper Conductor Technical Requirements | Insulated Cable Engineers Association | |
Food and Drug Administration | 21 CFR 172.841(b) | 1st Supplement, 5th Edition, Food Chemical Index | 2006 | Polydextrose | National Academy Press | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (58) | EPA Method 265.2 | 1978 | Rhodium (Atomic Absorption, Furnace Technique) | U.S. Environmental Protection Agency | |
National Highway Traffic Safety Administration | 49 CFR 572.133(a) | Drawing No. 880105-250 | 2002 | Neck Assembly | Reprographic Technologies | |
Coast Guard | 33 CFR 157.12(b)(2) | IMO Resolution A.496(XII) | 1981 | Guidelines and Specifications for Oil Discharge Monitoring and Control Systems for Oil Tankers | International Maritime Organization | |
Health and Human Services Department | 45 CFR 162.920(c)(3)(i) | CAQH Publication | 2011 | Phase II CORE 250: Claim Status Rule, version 2.1.0 | Council for Affordable Quality Healthcare's (CAQH) Committee on Operating Rules for Information Exchange (CORE) | |
Environmental Protection Agency | 40 CFR 761.75(b)(8)(iii) | ASTM D 3278 | 1989 | Standard Test Method for Flash Point of Liquids by Setaflash Closed-Cup Apparatus | ASTM International | |
National Highway Traffic Safety Administration | 49 CFR 571.403 S6.2.3 | SAE J-211/1 | 1995 | Instrumentation for Impact Tests | Society of Automotive Engineers | |
Coast Guard | 46 CFR 56.60-1(b) Table 56.60-1(a) | ASME B31.1 | 2001 | Power Piping ASME Code for Pressure Piping | American Society of Mechanical Engineers | |
Environmental Protection Agency | 40 CFR 1066.310(b)(1)(ii) | SAE J-2263 | 2008 | Road Load Measurement Using Onboard Anemometry and Coastdown Techniques | Society of Automotive Engineers | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IH | APHA Standard Methods, 20th Edition | 1998 | Standard Methods for the Examination of Water and Wastewater. 20th Edition | American Public Health Association | |
Environmental Protection Agency | 40 CFR 763 Appendix A (III)(L)(3) | N.B.S. Special Publication 619 | 1982 | Asbestos Standards: Materials and Analytical Methods | National Institute of Standards and Technology, U.S. Department of Commerce | |
Environmental Protection Agency | 40 CFR 98.124(m)(2) | ASME MFC-4M | 1986 | Measurement of Gas Flow by Turbine Meters | American Society of Mechanical Engineers | |
Occupational Safety and Health Administration | 29 CFR 1910.268(i)(1) | ANSI Z89.2 | 1971 | Safety Requirements for Industrial Protective Helmets for Electrical Workers, Class B | American National Standards Institute | |
Environmental Protection Agency | 40 CFR 1048.105(a) | SAE J-2260 | 2004 | Non-metallic Fuel System Tubing with One or More Layers | Society of Automotive Engineers | |
Coast Guard | 33 CFR 126.15(a)(2) | NFPA 14 | 1996 | Standard for the Installation of Standpipe and Hose Systems | National Fire Protection Association | |
Coast Guard | 46 CFR 160.151-33(b) | IMO LSA Code | 2010 | Life-Saving Appliances, including LSA Code | International Maritime Organization | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IG (Acephate) | EPA Method 1657 | 1993 | The Determination of Organo-Phosphorus Pesticides in Municipal and Industrial Wastewater | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 260.11(c)(2)(i) | EPA-821-R-98-002 | 1999 | EPA Method 1664, n-Hexane Extractable Material (HEM; Oil and Grease) and Silica Gel Treated n-Hexane Extractable Material SGT-HEM; Non-polar Material) by Extraction and Gravimetry: Revision A | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 63.1282(g)(4)(iii)(B)(1) | ASTM D 1945 | 2010 | Standard Test Method for Analysis of Natural Gas by Gas Chromatography | ASTM International | |
Coast Guard | 40 CFR 1065.705 Table 1 | ISO 2719 | 2002 | Determination of flash point--Pensky-Martens closed cup method | International Organization for Standardization | |
Occupational Safety and Health Administration | 29 CFR 1910 Subpart L Appendix C (II)(A)(4) | NFPA 1201 | 2010 | Organization for Fire Services | National Fire Protection Association | |
Occupational Safety and Health Administration | 29 CFR 1910.269 Appendix G | ASTM F 1430/F 1430M | 2010 | Standard Test Method for Acoustic Emission Testing of Insulated and Non-Insulated Aerial Personnel Devices with Supplemental Load Handling Attachments | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1926.552(d) | ANSI A17.1d | 1970 | Safety Code for Elevators, Dumbwaiters and Moving Walks | American National Standards Institute | |
National Highway Traffic Safety Administration | 49 CFR 572.31(a)(3) | Drawing No. 78051-60 | 1998 | Pelvic Structure-Molded ASM-Hybrid III | General Motors Corporation | |
National Highway Traffic Safety Administration | 49 CFR 571.108 S14.6.11.1.1 | ASTM B 117 | 1979 | Standard Method of Salt Spray (Fog) Testing | ASTM International |