This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation Sort descending | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Environmental Protection Agency | 40 CFR 136.3(b)(5)(iii)(E) | EPA Method 206.5 | 1978 | Arsenic, Sample Digestion Prior to Total Arsenic Analysis by Silver Diethyldithiocarbamate or Hydride Procedures | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 435.13 Note 8 | EPA Method 1646 | 2015 | Procedure for Mixing Base Fluids With Sediments | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 80.1468(b)(4) | ASTM D 6751 | 2009 | Standard Specification for Biodiesel Fuel Blend Stock (B100) for Middle Distillate Fuels | ASTM International | |
Coast Guard | 21 CFR 172.736(b)(4) | FDA Publication | 1998 | Determination of Ethylene Oxide and 1,4-Dioxane by Headspace Gas Chromatography | Food and Drug Administration, U.S. Department of Health and Human Services | |
Environmental Protection Agency | 40 CFR 147.1700(a)(3) | NCUIC regulations | 1987 | Water and Air Resources, N.C. GEN. STAT. §§ 143-211 through 143-215.10 (1987 and Cumm. Supp. 1989) | State of North Carolina | |
Environmental Protection Agency | 40 CFR 63.5935 Corrosion-resistant industry standard | UL 1316 | 2013 | Glass-Fiber-Reinforced Plastic Underground Storage Tanks for Petroleum Products, Alcohols, and Alcohol-Gasoline Mixtures | Underwriters Laboratories, Inc. | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.1007(a)(4)(i)(D) | API 17J | 2008 | Specification for Unbonded Flexible Pipe | American Petroleum Institute | |
Coast Guard | 46 CFR 160.005-1(b) | Drawing No. 160.005-1 (Sheet 4) | 2012 | Cutting Pattern and General Arrangement (Child) | U.S. Coast Guard | |
Rural Utilities Service | 7 CFR 1755.506(dd) | 7 CFR 1755.505 | 2012 | Buried services | Rural Utilities Service, U.S. Department of Agriculture | |
Rural Utilities Service | 7 CFR 1755.870(h)(7) | ASTM D 4566 | 1990 | Standard Test Method for Electrical Performance Properties of Insulations and Jackets for Telecommunications Wire and Cable | ASTM International | |
Coast Guard | 36 CFR 1238.20(b) | ISO 18901 | 2002 | Imaging Materials--Processed Silver-gelatin Type Black-and-White Films--Specifications for Stability | International Organization for Standardization | |
Food and Drug Administration | 21 CFR 177.1350(b)(2) | ASTM D 1238 | 1982 | Standard Method of Measuring Flow Rates of Thermoplastics by Extrusion Plastometer | ASTM International | |
Food and Drug Administration | 21 CFR 172.869(b)(5) | MCC Publication | 1998 | Free Sucrose Method | Mitsubishi Chemical Corporation | |
Food and Drug Administration | 21 CFR 184.1666(b) | Food Chemicals Codex | 1981 | Propylene Glycol | National Academy Press | |
Federal Railroad Administration | 49 CFR 229 Appendix F Verification Guidance (a)(5) | DOT/FRA/ORD-95/10.2 | 1995 | Safety of High Speed Ground Transportation Systems, Analytical Methodology for Safety Validation of Computer Controlled Subsystems, Volume II: Development of a Safety Validation Methodology | U.S. Department of Transportation | |
National Highway Traffic Safety Administration | 49 CFR 572.120(a)(1)(vi) | Drawing No. 127-5000-1 | 2009 | Drawings and Specifications for the Hybrid III 6-year-old Dummy, Arm Assembly | Reprographic Technologies | |
Coast Guard | 40 CFR 136.3(a) Table IB (3) | APHA Method 3113 B | 2004 | Metals by Graphite Furnace Atomic Absorption | American Public Health Association | |
Housing and Urban Development Department | 24 CFR 200.949(a)(1)(vii) | ISDSI 106 | 1980 | Test Procedures and Acceptance Criteria for Physical Endurance for Prime Painted Steel Surfaces for Steel Doors and Frames | Insulated Steel Door Institute | |
Environmental Protection Agency | 40 CFR 136.3(a) Table ID (52) | USGS O-1126-95 | 1995 | Methods of Analysis by the U.S. Geological Survey National Water Quality Laboratory - Determination of Pesticides in Water by C-18 SPE and Capillary-Column GC-MS with Select-Ion Monitoring | U.S. Geological Survey | |
Energy Department | 10 CFR 440 Appendix A | NWWDA I.S. 2 | 1987 | Industry Standard for Wood Windows | National Wood Window and Door Association | |
Housing and Urban Development Department | 24 CFR 200.943(a)(1) | NIST PS 20 | 1994 | American Softwood Lumber Standard | National Institute of Standards and Technology, U.S. Department of Commerce | |
Coast Guard | 21 CFR 165.110(b)(4)(iii)(G)(1)(ii) | EPA-600-4-79-020 | 1983 | Method 202.2--Atomic Absorption: furnace technique | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 444.12(b)(1) | EPA-600-R-94-111 | 1994 | Methods for Determination of Metals in Environmental Samples—Supplement I | U.S. Environmental Protection Agency | |
Occupational Safety and Health Administration | 29 CFR 1910.66 Appendix D (b)(1) | ANSI A120.1 | 1970 | Safety Code for Powered Platforms for Exterior Building Maintenance | American National Standards Institute | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (58) | EPA Method 610 (GC) | 1982 | Polynuclear Hydrocarbons by GC/FID | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 141.40(a)(3) Table 1 (bromomethane) | EPA Method 524.3 | 2009 | Measurement of Purgeable Organic Compounds in Water by Capillary Column Gas Chromatography/Mass Spectrometry | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 60 Subpart MMMM, Table 3, Mercury | ASTM D 6784 | 2002 | Standard Test Method for Elemental, Oxidized, Particle-Bound and Total Mercury in Flue Gas Generated from Coal-Fired Stationary Sources (Ontario Hydro Method) | ASTM International | |
Coast Guard | 40 CFR 136.3(a) Table IB (37) | ASTM D 1886A | 2008 | Standard Test Methods for Nickel in Water, Atomic Absorption, Direct | ASTM International | |
Environmental Protection Agency | 40 CFR 75.6(f)(3) | API MPMS | 2001 | Chapter 4, Section 2 | American Petroleum Institute | |
Coast Guard | 46 CFR 56.01-2(e)(25) | ASTM A 320/ A 320M | 1997 | Standard Specification for Alloy-Steel Bolting Materials for Low-Temperature Service | ASTM International | |
Environmental Protection Agency | 40 CFR 141.23(k)(1) Table (16) Mercury | ASTM D 3223 | 2002 | Standard Test Method for Total Mercury in Water | ASTM International | |
Environmental Protection Agency | 40 CFR 60, Appendix A-8, Method 29, Section 18.0, Table 29-3 | EPA Method 7080 | 1986 | Test Methods for Evaluating Solid Waste, Physical/Chemical Methods, SW-846 Third Edition | U.S. Environmental Protection Agency | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.901(a)(19) | ASTM C 595-08 | 2008 | Standard Specification for Blended Hydraulic Cements | ASTM International | |
Energy Department | 10 CFR 431.85(b)(1) | HI BTS-2000 | 2007 | Method to Determine Efficiency of Commercial Space Heating Boilers | Hydronics Institute | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 171.7(a)(3) | NAVSEAINST 8020.8B | 1998 | Explosive Hazard Classification Procedures | U.S. Department of Defense | |
Federal Motor Carrier Safety Administration | 49 CFR 393.104(e)(5)(iv) | CIA NRS-1 | 1979 | Nylon Rope Specification, Three- and Eight-Strand Standard Construction | Cordage Institute | |
Environmental Protection Agency | 40 CFR 63.626(d)(3)(vi)(B) | AOAC Method 929.01 | 1995 | Sampling of Solid Fertilizers, Sixteenth Edition | AOAC International | |
Environmental Protection Agency | 40 CFR 60.17(g)(152) | ASTM D 4239 | 1985 | Standard Test Methods for Sulfur in the Analysis Sample of Coal and Coke Using High Temperature Tube Furnace Combustion Methods | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1926.350(c)(2) | 49 CFR 178 | 2012 | Specification for Cylinders | U.S. Department of Transportation | |
Coast Guard | 46 CFR 164.120-5(b)(5) | ASTM D 790 | 2007 | Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials | ASTM International | |
Research and Special Programs Administration | 10 CFR 440 Appendix A | ASME B&PV Code | 1992 | Boiler and Pressure Vessel Code, Section IX | American Society of Mechanical Engineers | |
Mine Safety and Health Administration | 30 CFR 57 Subpart C Appendix I | NFPA 16 | 2011 | Foam Water Spray Extinguishing Systems | National Fire Protection Association | |
Architectural and Transportation Barriers Compliance Board | 36 CFR 1191, App B, 105.2.3 | ASTM F 1292 | 2004 | Standard Specification for Impact Attenuation of Surface Systems Under and Around Playground Equipment | ASTM International | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (46) | AOAC Method 973.45 | 2014 | Oxygen (dissolved) in water. Titrimetric methods | AOAC International | |
Coast Guard | 46 CFR 160.077-11(a)(6) | Federal Standard 191 | 1978 | Method 5762, Mildew Resistance of Textile Materials: Soil Burial Method | Federal Specifications Standards and Test Methods | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 171.8 | NIST Handbook H-28 | 1966 | Handbook of Screw-Thread Standards for Federal Service | National Institute of Standards and Technology, U.S. Department of Commerce | |
Minerals Management Service | 30 CFR 250.1628(d)(4)(i) | API RP 500 | 2002 | Recommended Practice for Classification of Locations for Electrical Installations at Petroleum Facilities Classified as Class 1, Division 1 and Division 2 | American Petroleum Institute | |
Environmental Protection Agency | 40 CFR 1060.515(c) | SAE J-30 | 1998 | Fuel and Oil Hoses | Society of Automotive Engineers | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IG Footnote 1 | EPA Method 1656 | 1993 | The Determination of Organo-Halide Pesticides in Municipal and Industrial Wastewater | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 444.12(b)(1) Table (7) | EPA Method 160.2 | 1971 | Residue, Non-Filterable (Gravimetric, Dried at 103-105 oC) | U.S. Environmental Protection Agency |