This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation Sort descending | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Environmental Protection Agency | 40 CFR 136.3(b)(20)(ii) | IDEXX Test Methods | 2002 | Colilert-18® Method | IDEXX Laboratories | |
Environmental Protection Agency | 40 CFR 435 Appendix 3, Subpart A | EPA Method 1646 | 2015 | Procedure for Mixing Base Fluids With Sediments | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 82, Subpart B, Appendix A, SAE J-1990, Section 8.1 | SAE J-1991 | 1994 | Standard of Purity for Use in Mobile Air-Conditioning Systems | Society of Automotive Engineers | |
National Highway Traffic Safety Administration | 49 CFR 572.20 | Drawing No. SA 103C 042 | 1976 | Upper Arm Assembly, Right | Reprographic Technologies | |
Environmental Protection Agency | 40 CFR 147.550(a)(2) | GAUIC regulations | 1988 | Ground Water Use Act of 1972, O.C.G.A. §§ 12-5-90 through 12-5-107 | State of Georgia | |
Environmental Protection Agency | 40 CFR 63.10042 Residual oil | ASTM D 396 | 2010 | Standard Specification for Fuel Oils | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1910.110(h)(2), Table H-34 | ASME B&PV Code | 1962 | Boiler and Pressure Vessel Code, Section VIII | American Society of Mechanical Engineers | |
Mine Safety and Health Administration | 30 CFR 57.3203(a)(1) | ASTM F 432 | 1995 | Standard Specification for Roof and Rock Bolts and Accessories | ASTM International | |
Coast Guard | 46 CFR 12.02-7(e) | STCW Convention | 1995 | STCW--International Convention on Standards of Training, Certification and Watchkeeping for Seafarers | International Maritime Organization | |
Research and Special Programs Administration | 49 CFR 195.106(e) | ASTM A 671 | 2004 | Standard Specification for Electric-Fusion-Welded Steel Pipe for Atmospheric and Lower Temperatures | ASTM International | |
Food and Drug Administration | 21 CFR 178.3530(a) | ASTM D 1353 | 1978 | Standard Test Method for Nonvolatile Matter in Volatile Solvents for Use in Paint, Varnish, Lacquer and Related Products | ASTM International | |
Environmental Protection Agency | 40 CFR 98.7(e)(4) | ASTM D 240 | 2007 | Standard Test Method for Heat of Combustion of Liquid Hydrocarbon Fuels by Bomb Calorimeter | ASTM International | |
Coast Guard | 33 CFR 142.42(b) | ANSI A10.14 | 1975 | Requirements for Safety Belts, Harnesses, Lanyards, and Lifelines | American National Standards Institute | |
Mine Safety and Health Administration | 30 CFR 77.403-1(d)(1) | SAE J-397a | 1973 | Deflection Limiting Volume-Protective Structures Laboratory Evaluation | Society of Automotive Engineers | |
Research and Special Programs Administration | 40 CFR 136.3(a) Table IB (25) | APHA Method 4500-F C | 1997 | Fluoride by Ion-Selective Electrode Method | American Public Health Association | |
Coast Guard | 46 CFR 111.105-40(a) | ABS Publication | 2003 | Rules for Building and Classing Steel Vessels | American Bureau of Shipping | |
National Highway Traffic Safety Administration | 49 CFR 571.225 S6.2.2.1(a)(1) | SAE J-1100 | 1993 | Motor Vehicle Dimensions | Society of Automotive Engineers | |
Energy Department | 10 CFR 430 Subpart B, App. B1, 1.1 | AHAM HRF-1 | 1979 | Household Refrigerators, Combination Refrigerator-Freezers, and Household Freezers | Association of Home Appliance Manufacturers | |
Coast Guard | 46 CFR 110.15-1(b), Dripproof | NEMA Publication 250 | 2001 | Enclosures for Electrical Equipment (1000 Volts Maximum) | National Electrical Manufacturers Association | |
National Highway Traffic Safety Administration | 49 CFR 572.33(b) | Drawing No. 78051-84 | 1987 | Title not specified | General Motors Corporation | |
Environmental Protection Agency | 40 CFR 136.3(a) Table ID (60) | EPA Method 632 | 1993 | Carbamate and Urea Pesticides by Liquid/Liquid Extraction and HPLC/UV-VIS | U.S. Environmental Protection Agency | |
Food and Drug Administration | 21 CFR 165.110(b)(4)(i)(C)(2) | APHA Standard Methods | 1980 | Standard Methods for the Examination of Water and Wastewater, Methods for Chlorinated Phenoxy Acid Herbicides in Industrial Effluents | American Public Health Association | |
Food and Drug Administration | 21 CFR 172.869(b)(3) | MCC Publication | 1998 | Method for Measuring the Ester Distribution of Sucrose Oligoesters | Mitsubishi Chemical Corporation | |
Occupational Safety and Health Administration | 29 CFR 1926.1440(c)(2) | ASME B30.14, Section 14-1.3 | 2004 | Side Boom Tractors, Side Boom Tractor Travel | American Society of Mechanical Engineers | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (68) | EPA Method 1613 B | 1997 | Tetra- through Octa-Chlorinated Dioxins and Furans by Isotope Dilution GC/HRMS | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 141.40(a)(3) Table 1 (4-androstene-3,17-dione) | EPA Method 539 | 2010 | Determination of Hormones in Drinking Water by Solid Phase Extraction (SPE) and Liquid Chromatography Electrospray Ionization Tandem Mass Spectrometry (LC-ESI-MS/MS) | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 60.485a(g)(5) | ASTM D 2504 | 1977 | Standard Test Method for Noncondensable Gases in C3 and Lighter Hydrocarbon Products by Gas Chromatography | ASTM International | |
Coast Guard | 46 CFR 160.060-1(a)(3) | Federal Standard 751A | 1977 | Stitches, Seams, and Stitchings | Federal Specifications Standards and Test Methods | |
Environmental Protection Agency | 40 CFR 141.23(k)(1) Table (18) Nitrate | APHA Method 4500-NO3 D | 2000 | Nitrate Nitrogen by Selective Electrode | American Public Health Association | |
Environmental Protection Agency | 40 CFR 60.17(f)(4) | ASME MFC-5M | 2006 | Measurement of Liquid Flow in Closed Conduits Using Transit-Time Ultrasonic Flowmeters | American Society of Mechanical Engineers | |
Food and Drug Administration | 21 CFR 175.250(b)(1) | ASTM D 938 | 1981 | Standard Test Method for Congealing Point of Petroleum Waxes, Including Petrolatum | ASTM International | |
Coast Guard | 33 CFR 154, Appendix C, 6.3.1 | ASTM F 631 | 1993 | Standard Guide for Collecting Skimmer Performance Data in Controlled Environments | ASTM International | |
Environmental Protection Agency | 40 CFR 147, Subpart BB, Appendix A(a)(2) | MTUIC regulations | 1995 | Montana Code annotated, 1995, Title 82, Chapter 10 | State of Montana | |
Rural Utilities Service | 7 CFR 1755.870(h)(4)(i) | ASTM D 4566 | 1990 | Standard Test Method for Electrical Performance Properties of Insulations and Jackets for Telecommunications Wire and Cable | ASTM International | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 173.323(b)(3) | CGA C-14 | 1979 | Procedures for Fire Testing of DOT Cylinder Pressure Relief Device Systems | Compressed Gas Association | |
Energy Department | 10 CFR 440 Appendix A | ASTM C 534 | 1988 | Preformed Flexible Elastomeric Cellular Insulation in Sheet and Tubular Form | ASTM International | |
National Highway Traffic Safety Administration | 49 CFR 572.100(b)(1) | Drawing No. 92041-009 | 1992 | Six-Axis Load Cell Simulator-Assembly | Reprographic Technologies | |
Coast Guard | 46 CFR 111.105-11(a) | UL 913 | 2003 | Intrinsically Safe Apparatus and Associated Apparatus for Use in Class I, II, and III Division 1, Hazardous (Classified) Locations | Underwriters Laboratories, Inc. | |
National Highway Traffic Safety Administration | 40 CFR 60.632(f) | ASTM E 260 | 1991 | Standard Practice for Packed Column Gas Chromatography | ASTM International | |
Environmental Protection Agency | 40 CFR 268.44(o), Table Footnote 4 | EPA Method 9010C | 2004 | Total and Amenable Cyanide: Distillation | U.S. Environmental Protection Agency | |
Federal Motor Carrier Safety Administration | 49 CFR 393.80(b)(1) | FMVSS 111 | 1998 | Rearview Mirrors | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Coast Guard | 46 CFR 56.20-1(c)(2)(i) | ASME B31.1 | 2001 | Power Piping ASME Code for Pressure Piping | American Society of Mechanical Engineers | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB Footnote 2 | USGS Publication | 1989 | Methods for Analysis of Inorganic Substances in Water and Fluvial Sediments, Techniques of Water-Resource Investigations of the U.S. Geological Survey, Book 5, Chapter A1., unless otherwise stated | U.S. Geological Survey | |
Food and Drug Administration | 21 CFR 178.3770(a)(2) | ASTM D 1386 | 1978 | Standard Test Method for Acid Number (Empirical) of Synthetic and Natural Waxes | ASTM International | |
Consumer Product Safety Commission | 16 CFR 1201.7(d)(2) | ANSI Z97.1 | 1975 | Performance Specifications and Methods of Test for Safety Glazing Material Used in Buildings | American National Standards Institute | |
Coast Guard | 46 CFR 160.151-21(k) | IMO LSA Code | 2010 | Life-Saving Appliances, including LSA Code | International Maritime Organization | |
Environmental Protection Agency | 40 CFR 1065.705(b)(3) | IP-470 | 2005 | Determination of aluminum, silicon, vanadium, nickel, iron, calcium, zinc, and sodium in residual fuels by atomic absorption spectrometry | Energy Institute | |
Environmental Protection Agency | 40 CFR 136.3(b)(7)(v)(J) | EPA Method 548 | 1990 | Endothall by SPE, Methylation, GC/ECD | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 444.12(b)(1) Table Note (13) | HCC Method 8009 | 1979 | Zincon Method for Zinc, Hatch Handbook of Water Analysis | Hach Chemical Company | |
Environmental Protection Agency | 40 CFR 98.354(d)(1) | ASME MFC-3M | 2004 | Measurement of Fluid Flow in Pipes Using Orifice, Nozzle, and Venturi | American Society of Mechanical Engineers |