DISCLAIMER: Data and information released from the Standards Incorporated by Reference databases at NIST are provided on an "AS IS" basis, without representation or warranty of any kind, including without limitation the warranties of merchantability, fitness for a particular purpose and non-infringement. Data and/or information in this database may contain errors or may be incomplete. Please email standardsinfo@nist.gov if you identified missing information or incorrect information. This database is provided by NIST as a public service. Inclusion of records in this database does not represent endorsement or recommendation of standards listed by NIST.
NOTE: This database does not included records related to the Incorporation by Reference for the following: Department of Transportation, Federal Aviation Administration – Airworthiness Directives, State Air Plan Approvals, and Standard Instrumentation Approach Procedures; and the Environmental Protection Agency - State Approval of Air Quality Plans.
Incorporated by (Agency) | FR Citation | CFR Citation Sort ascending | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Energy Department | 10 CFR 431.12, General purpose electric motor (Subtype 1) (2) | NEMA MG-1 | 1993 | Motors and Generators | National Electrical Manufacturers Association | |
Energy Department | 10 CFR 431.12, General purpose electric motor (Subtype 1) (1) | NEMA MG-1 | 1993 | Motors and Generators | National Electrical Manufacturers Association | |
Energy Department | 10 CFR 431.12, Accreditation | CSA C390 | 1993 | Input-Output Method with Indirect Measurement of the Stray-Load Loss and Direct Measurement of the Stator Winding (I2R), Rotor Winding (I2R), Core and Windage-Friction Losses, Test Method (1) | Canadian Standards Association | |
Energy Department | 10 CFR 431.12, Accreditation | IEEE 112 | 1996 | Test Procedure for Polyphase Induction Motors and Generators | Institute of Electrical and Electronics Engineers | |
Energy Department | 10 CFR 431.106(b) Table | ASTM D 2156 | 1980 | Standard Method for Smoke Density in Flue Gases from Burning Distillate Fuels 1980 | ASTM International | |
Energy Department | 10 CFR 431.106(b) Table | ANSI Z21.10.3 | 1998 | Standard for Gas Water Heaters | American National Standards Institute | |
Energy Department | 10 CFR 431.105(d)(2)(iii) | ASTM D 2156 | 1980 | Standard Method for Smoke Density in Flue Gases from Burning Distillate Fuels | ASTM International | |
Energy Department | 10 CFR 431.105(d)(2)(ii) | ASTM C 177 | 1997 | Standard Test Method for Steady-State Heat Flux Measurements and Thermal Transmission Properties by Means of the Guarded-Hot-Plate Apparatus | ASTM International | |
Energy Department | 10 CFR 431.105(d)(2)(i) | ASTM C 518 | 1991 | Standard Test Method for Steady-State Heat Flux Measurements and Thermal Transmission Properties by Means of the Heat Flow Meter Apparatus | ASTM International | |
Energy Department | 10 CFR 431.105(b) | CSA 4.3a-M | 2000 | Addenda to Standard for Gas Water Heaters, Volume III, Storage Water Heaters, with Input Ratings above 75,000 Btu's per Hour, Circulating and Instantaneous | Canadian Standards Association | |
Energy Department | 10 CFR 431.105(b) | ANSI Z21.10.3 | 1998 | Standard for Gas Water Heaters, Volume III, Storage Water Heaters, with Input Ratings above 75,000 Btu's per Hour, Circulating and Instantaneous | American National Standards Institute | |
Energy Department | 10 CFR 431.105(b) | ANSI Z21.10.3a | 2000 | Addenda to Standard for Gas Water Heaters, Volume III, Storage Water Heaters, with Input Ratings above 75,000 Btu's per Hour, Circulating and Instantaneous | American National Standards Institute | |
Energy Department | 10 CFR 431.105(b) | CSA 4.3-M | 1998 | Standard for Gas Water Heaters, Volume III, Storage Water Heaters, with Input Ratings above 75,000 Btu's per Hour, Circulating and Instantaneous | Canadian Standards Association | |
Energy Department | 10 CFR 431.102, Standby loss | ANSI Z21.10.3 | 1998 | Standard for Gas Water Heaters | American National Standards Institute | |
Energy Department | 10 CFR 431.102, R-value | ASTM C 177 | 1997 | Standard Test Method for Steady-State Heat Flux Measurements and Thermal Transmission Properties by Means of the Guarded-Hot-Plate Apparatus | ASTM International | |
Energy Department | 10 CFR 431.102, R-value | ASTM C 518 | 1991 | Standard Test Method for Steady-State Heat Flux Measurements and Thermal Transmission Properties by Means of the Heat Flow Meter Apparatus | ASTM International | |
Energy Department | 10 CFR 431.102 | ASTM D 2156 | 1980 | Method of Tests for Smoke Density in Flue Gases from Distillate Fuels | ASTM International | |
Energy Department | 10 CFR 431 Subpart B, App. B, 2 (2) | IEEE 112 | 1996 | Test Procedure for Polyphase Induction Motors and Generators | Institute of Electrical and Electronics Engineers | |
Energy Department | 10 CFR 431 Subpart B, App. B, 2 (1) | CSA C390 | 1993 | Input-Output Method with Indirect Measurement of the Stray-Load Loss and Direct Measurement of the Stator Winding (I2R), Rotor Winding (I2R), Core and Windage-Friction Losses | Canadian Standards Association | |
Energy Department | 10 CFR 431 Subpart B, App. B, 2 | NEMA MG-1 | 1993 | Motors and Generators | National Electrical Manufacturers Association | |
Energy Department | 86 FR 40765 | 10 CFR 431 | CSA C747–09 (R2014) | Energy Conservation Program: Test Procedure for Dedicated-Purpose Pool Pump Motors | Canadian Standards Association | |
Energy Department | 88 FR 17934 | 10 CFR 431 | IEEE 112–2017 | 2017 | Energy Conservation Program: Test Procedure for Commercial and Industrial Pumps | Institute of Electrical and Electronics Engineers |
Energy Department | 86 FR 16027 | 10 CFR 431 | AHRI 1250–2020 | Energy Conservation Program: Test Procedure for Walk-In Coolers and Walk-In Freezers | Air Conditioning, Heating, and Refrigeration Institute | |
Energy Department | 87 FR 37685 | 10 CFR 431 | ANSI C78.44–2016 | Energy Conservation Program: Test Procedure for Metal Halide Lamp Fixtures | American National Standards Institute | |
Energy Department | 87 FR 63588 | 10 CFR 431 | ANSI/NEMA MG 1–2016 (Revision 1, 2018) | Energy Conservation Program: Test Procedure for Electric Motors | National Electrical Manufacturers Association | |
Energy Department | 87 FR 33316 | 10 CFR 431 | AATCC TM118–2007 | Energy Conservation Program: Test Procedures for Residential and Commercial Clothes Washers | American Association of Textile Chemists and Colorists | |
Energy Department | 88 FR 17934 | 10 CFR 431 | IEEE 114–2010 | 2010 | Energy Conservation Program: Test Procedure for Commercial and Industrial Pumps | Institute of Electrical and Electronics Engineers |
Energy Department | 87 FR 37685 | 10 CFR 431 | ANSI C82.6– 2015 (R2020) | Energy Conservation Program: Test Procedure for Metal Halide Lamp Fixtures | American National Standards Institute | |
Energy Department | 87 FR 63588 | 10 CFR 431 | NFPA 20–2022 | Energy Conservation Program: Test Procedure for Electric Motors | National Fire Protection Association | |
Energy Department | 87 FR 33316 | 10 CFR 431 | AATCC TM135–2010 | Energy Conservation Program: Test Procedures for Residential and Commercial Clothes Washers | American Association of Textile Chemists and Colorists | |
Energy Department | 88 FR 17934 | 10 CFR 431 | ISO 1438:2017(E) | 2017 | Energy Conservation Program: Test Procedure for Commercial and Industrial Pumps | International Organization for Standardization |
Energy Department | 87 FR 37685 | 10 CFR 431 | ANSI C82.9–2016 | Energy Conservation Program: Test Procedure for Metal Halide Lamp Fixtures | American National Standards Institute | |
Energy Department | 87 FR 33316 | 10 CFR 431 | IEC 62301:2011 | Energy Conservation Program: Test Procedures for Residential and Commercial Clothes Washers | International Electrotechnical Commission | |
Energy Department | 88 FR 17934 | 10 CFR 431 | ISO 2186:2007(E) | 2007 | Energy Conservation Program: Test Procedure for Commercial and Industrial Pumps | International Organization for Standardization |
Energy Department | 87 FR 37685 | 10 CFR 431 | IEC 63103:2020 | Energy Conservation Program: Test Procedure for Metal Halide Lamp Fixtures | International Electrotechnical Commission | |
Energy Department | 87 FR 33316 | 10 CFR 431 | AATCC TM79–2010 | Energy Conservation Program: Test Procedures for Residential and Commercial Clothes Washers | American Association of Textile Chemists and Colorists | |
Energy Department | 87 FR 75144 | 10 CFR 431 | ANSI/ASHRAE 37-2009 (R2019) | Energy Conservation Program: Test Procedure for Single Package Vertical Air Conditioners and Single Package Vertical Heat Pumps | American National Standards Institute | |
Energy Department | 88 FR 17934 | 10 CFR 431 | ANSI/HI 9.6.1–2017 | 2017 | Energy Conservation Program: Test Procedure for Commercial and Industrial Pumps | Hydraulic Institute |
Energy Department | 88 FR 17934 | 10 CFR 431 | ISO 2715:2017(E) | 2017 | Energy Conservation Program: Test Procedure for Commercial and Industrial Pumps | International Organization for Standardization |
Energy Department | 87 FR 75144 | 10 CFR 431 | ANSI/ASHRAE 41.2-1987 (RA 92) | Energy Conservation Program: Test Procedure for Single Package Vertical Air Conditioners and Single Package Vertical Heat Pumps | American National Standards Institute | |
Energy Department | 87 FR 63588 | 10 CFR 431 | CSA C390:10 (R2019) | Energy Conservation Program: Test Procedure for Electric Motors | Canadian Standards Association | |
Energy Department | 86 FR 51230 | 10 CFR 431 | IEEE C57.12.91-2011 | Energy Conservation Program: Test Procedure for Distribution Transformers | Institute of Electrical and Electronics Engineers | |
Energy Department | 88 FR 17934 | 10 CFR 431 | ANSI/HI 9.6.6–2016 | 2016 | Energy Conservation Program: Test Procedure for Commercial and Industrial Pumps | Hydraulic Institute |
Energy Department | 88 FR 17934 | 10 CFR 431 | ISO 3354:2008(E) | 2008 | Energy Conservation Program: Test Procedure for Commercial and Industrial Pumps | International Organization for Standardization |
Energy Department | 87 FR 63860 | 10 CFR 431 | ANSI/AHRI 1230-2010 | Energy Conservation Program: Test Procedure for VRF Multi-Split Systems | American National Standards Institute | |
Energy Department | 87 FR 63860 | 10 CFR 431 | ANSI/ASHRAE 37-2009 (R2019) | Energy Conservation Program: Test Procedure for VRF Multi-Split Systems | American National Standards Institute | |
Energy Department | 87 FR 45164 | 10 CFR 431 | AHRI Standard 1060 (I–P) | Energy Conservation Program: Test Procedure for Direct Expansion-Dedicated Outdoor Air Systems | Air Conditioning, Heating, and Refrigeration Institute | |
Energy Department | 88 FR 17934 | 10 CFR 431 | ANSI/HI 9.8–2018 | 2018 | Energy Conservation Program: Test Procedure for Commercial and Industrial Pumps | Hydraulic Institute |
Energy Department | 88 FR 17934 | 10 CFR 431 | ISO 3966:2020(E) | 2020 | Energy Conservation Program: Test Procedure for Commercial and Industrial Pumps | International Organization for Standardization |
Energy Department | 86 FR 40765 | 10 CFR 431 | UL 1004–10:2020 | Energy Conservation Program: Test Procedure for Dedicated-Purpose Pool Pump Motors | Underwriters Laboratories, Inc. |