DISCLAIMER: Data and information released from the Standards Incorporated by Reference databases at NIST are provided on an "AS IS" basis, without representation or warranty of any kind, including without limitation the warranties of merchantability, fitness for a particular purpose and non-infringement. Data and/or information in this database may contain errors or may be incomplete. Please email standardsinfo@nist.gov if you identified missing information or incorrect information. This database is provided by NIST as a public service. Inclusion of records in this database does not represent endorsement or recommendation of standards listed by NIST.
NOTE: This database does not included records related to the Incorporation by Reference for the following: Department of Transportation, Federal Aviation Administration – Airworthiness Directives, State Air Plan Approvals, and Standard Instrumentation Approach Procedures; and the Environmental Protection Agency - State Approval of Air Quality Plans.
Incorporated by (Agency) Sort descending | FR Citation | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Coast Guard | 46 CFR 160.151-21(q) | IMO LSA Code | 2010 | Life-Saving Appliances, including LSA Code | International Maritime Organization | |
Coast Guard | 46 CFR 56.60-1(b) Table 56.60-1(a) | ASTM A 213/A 213M | 1995 | Standard Specification for Seamless Ferritic and Austenitic Alloy-Steel Boiler, Superheater, and Heat Exchanger Tubes | ASTM International | |
Coast Guard | 46 CFR 160.151-15(l) | IMO Resolution MSC.293(87) | 2010 | Annex 7 to MSC 87/26, Report of the Maritime Safety Committee on its Eighty-Seventh Session, Resolution MSC.293(87), Adoption of Amendments to the International Life-Saving Appliance (LSA) Code | International Maritime Organization | |
Coast Guard | 46 CFR 160.156-5(f)(1) | MIL-C-19663D | 1988 | Military Specification, Cloth, Woven Roving, For Plastic Laminate | U.S. Department of Defense | |
Coast Guard | 46 CFR 111.60-1(d) | IEEE Std 1580 | 2001 | Recommended Practice for Marine Cable for Use on Shipboard and Fixed or Floating Platforms | Institute of Electrical and Electronics Engineers | |
Coast Guard | 46 CFR 39.1005(d)(1) | ASTM F 1122 | 1992 | Steel Pipe Flanges and Pipe Fittings | ASTM International | |
Coast Guard | 46 CFR 56.60-15(a) | ASTM A 395/A 395M | 1998 | Ferritic Ductile Iron Pressure-Retaining Castings for Use at Elevated Temperatures | ASTM International | |
Coast Guard | 46 CFR 120.420 | UL 1104 | 1981 | Standard for Marine Navigation Lights including revisions through May, 1988 | Underwriters Laboratories, Inc. | |
Coast Guard | 46 CFR 111.60-11(c) | UL 44 | 1999 | Standard for Thermoset-Insulated Wire and Cable, Fifteenth Edition, Mar. 22, 1999 (Revisions through and including May 13, 2002) | Underwriters Laboratories, Inc. | |
Coast Guard | 46 CFR 160.170-5(c)(4) | IMO MSC/Circular 980 | 2001 | Standardized Life-saving Appliance Evaluation and Test Report Forms | International Maritime Organization | |
Coast Guard | 40 CFR 136.3(a) Table IB (4) | Method 4500-NH3 B | 1997 | Ammonia Nitrogen Distillation | American Public Health Association | |
Coast Guard | 46 CFR 56.01-2(d)(13) | ASME B16.20 | 1998 | Metallic Gaskets for Pipe Flanges: Ring-Joint, Spiral-Wound, and Jacketed | American Society of Mechanical Engineers | |
Coast Guard | 46 CFR 114.400(b), Flame spread | UL 723 | 1993 | Surface Burning Characteristics of Building Materials | Underwriters Laboratories, Inc. | |
Coast Guard | 10 CFR 430.2, Definitions, Vented hearth heater (2)(i) | ANSI Z21.50 | 2007 | Vented Gas Fireplaces | American National Standards Institute | |
Coast Guard | 46 CFR 162.060-36 | ISO/IEC 17025:2005/Cor.1:2006(E) | 2006 | General Requirements for the Competence of Testing and Calibration Laboratories, Technical Corrigendum 1 | International Organization for Standardization / International Electrotechnical Commission | |
Coast Guard | 46 CFR 111.70-3(a) | IEC 92-201 | 1994 | Electrical Installation in Ships, Part 201: System Design-General, Fourth Edition | International Electrotechnical Commission | |
Coast Guard | 46 CFR 30.01-3(b)(1) | ASTM D 323 | 1994 | Standard Test Method for Vapor Pressure of Petroleum Products (Reid Method) | ASTM International | |
Coast Guard | 46 CFR 56.01-2(l)(1) | SAE J-1475 | 1996 | Surface Vehicle Hydraulic Hose Fittings for Marine Applications | Society of Automotive Engineers | |
Coast Guard | 46 CFR 181.450(a)(1) | UL 217 | 1993 | Single and Multiple Station Smoke Detectors | Underwriters Laboratories, Inc. | |
Coast Guard | 33 CFR 101.505(a) | IMO Conference Resolution 1 | 2002 | SOLAS Chapter XI-2, Regulation 10 | International Maritime Organization | |
Coast Guard | 46 CFR 164.120-5(d)(10) | ISO 2114:2000(E) | 2000 | Plastics (polyester resins) and paints and varnishes (binders)—Determination of partial acid value and total acid value, Third Edition | International Organization for Standardization | |
Coast Guard | 46 CFR 111.60-1(a) | MIL-C-24643A | 1994 | Military Specification Cables and Cords, Electric, Low Smoke, for Shipboard Use, General Specification for (1996) Amendment 2 | U.S. Department of Defense | |
Coast Guard | 46 CFR 56.15-1(e) | MSS SP-25 | 1998 | Standard Marking System for Valves, Fittings, Flanges and Unions | Manufacturers Standardization Society of the Valve and Fittings Industry | |
Coast Guard | 33 CFR 126.15(a)(9) | NFPA 307 | 1995 | Standard for the Construction and Fire Protection of Marine Terminals, Piers, and Wharves | National Fire Protection Association | |
Coast Guard | 33 CFR 164.03(b) | ITU-R Recommendation M.1371-1 | 2001 | Technical Characteristics for a Universal Shipborne Automatic Identification System Using Time Division Multiple Access in the VHF Maritime Mobile Band | International Telecommunication Union Radiocommunication Bureau | |
Coast Guard | 46 CFR 169.563(c) | UL 19 | 1978 | Woven Jacketed, Rubber Lined Fire Hose | Underwriters Laboratories, Inc. | |
Coast Guard | 21 CFR 165.110(b)(4)(iii)(E)(2)(i) | EPA-600-4-79-020 | 1983 | Method 208.2--Atomic Absorption: furnace technique | U.S. Environmental Protection Agency | |
Coast Guard | 46 CFR 12.10-7 | STCW Convention | 1995 | STCW--International Convention on Standards of Training, Certification and Watchkeeping for Seafarers | International Maritime Organization | |
Coast Guard | 40 CFR 444.12(b)(1) Table (3) | USGS I-3236-85 | 1985 | Chromium by Flame Atomic Absorption | U.S. Geological Survey | |
Coast Guard | 46 CFR 58.03-1(g)(5) | ASTM B 152 | 1997 | Standard Specification for Copper Sheet, Strip, Plate, and Rolled Bar | ASTM International | |
Coast Guard | 46 CFR 183.340(i) | UL 486A | 1992 | Wire Connectors and Soldering Lugs For Use With Copper Conductors | Underwriters Laboratories, Inc. | |
Coast Guard | 46 CFR 56.30-20(d) | ASME B31.1 | 2001 | Power Piping ASME Code for Pressure Piping | American Society of Mechanical Engineers | |
Coast Guard | 46 CFR 132.130(n) | UL 19 | 1993 | Fire hose | Underwriters Laboratories, Inc. | |
Coast Guard | 46 CFR 160.174-3(b) | ASTM D 975 | 1998 | Standard Specification for Diesel Fuel Oils | ASTM International | |
Coast Guard | 46 CFR 53.01-1(c)(2) | UL 1453 | 1995 | Standard for Electric Booster and Commercial Storage Tank Water Heaters, Fourth Edition | Underwriters Laboratories, Inc. | |
Coast Guard | 46 CFR 56.65-1 | ASME B31.1 | 2001 | Power Piping ASME Code for Pressure Piping | American Society of Mechanical Engineers | |
Coast Guard | 36 CFR 1235.4(e)(2) | ANSI X3.180 | 1990 | Magnetic Tape and Cartridge for Information Interchange - 18-Track, Parallel, 1/2-inch (12.65mm), 37 871 CPI (1491 cpmm), Group-Coded Requirements for Recording | American National Standards Institute | |
Coast Guard | 33 CFR 127.003(b) | ASTM F 1121 | 1993 | Standard Specification for International Shore Connections for Marine Fire Applications | ASTM International | |
Coast Guard | 46 CFR 184.240(c)(2) | ABYC A-1 | 1993 | Marine Liquefied Petroleum Gas Systems | American Boat and Yacht Council | |
Coast Guard | 7 CFR 1728.201(j)(4) | AWPA A5 | 2005 | Standard Methods for Analysis of Oil-Borne Preservatives | American Wood Protection Association | |
Coast Guard | 46 CFR 170.270(c)(3) | ASTM F 1197 | 1994 | Standard Specification for Sliding Watertight Door Control Systems | ASTM International | |
Coast Guard | 46 CFR 111.81-1(d) | IEC 60092-101 | 2002 | Electrical Installation in Ships, Part 101: Definitions and General Requirements, Edition 4.1 | International Electrotechnical Commission | |
Coast Guard | 40 CFR 60.111(b) | ASTM D 396 | 1992 | Standard Specification for Fuel Oils | ASTM International | |
Coast Guard | 46 CFR 56.70-5(a) | ASME B&PV Code | 1989 | Boiler & Pressure Vessel Code, Section IX, Welding and Brazing Qualifications | American Society of Mechanical Engineers | |
Coast Guard | 46 CFR 57.04-1 | ASME B&PV Code | 1989 | Boiler & Pressure Vessel Code, Section IX, Welding and Brazing Qualifications | American Society of Mechanical Engineers | |
Coast Guard | 46 CFR 197.550(h) | ANSI Z88.2 | 1980 | Respiratory Protection | American National Standards Institute | |
Coast Guard | 21 CFR 172.340(b) | AOAC Official Methods | 1980 | Official Methods of Analysis | AOAC International | |
Coast Guard | 46 CFR 15.1103(c) | STCW Convention | 1995 | STCW--International Convention on Standards of Training, Certification and Watchkeeping for Seafarers | International Maritime Organization | |
Coast Guard | 46 CFR 111.60-3(b)(3) | MIL-C-24643A | 1994 | Military Specification Cables and Cords, Electric, Low Smoke, for Shipboard Use, General Specification for (1996) Amendment 2 | U.S. Department of Defense | |
Coast Guard | 46 CFR 125.180(b) | UL 486A | 1992 | Wire Connectors and Soldering Lugs for Use with Copper Conductors | Underwriters Laboratories, Inc. |