DISCLAIMER: Data and information released from the Standards Incorporated by Reference databases at NIST are provided on an "AS IS" basis, without representation or warranty of any kind, including without limitation the warranties of merchantability, fitness for a particular purpose and non-infringement. Data and/or information in this database may contain errors or may be incomplete. Please email standardsinfo@nist.gov if you identified missing information or incorrect information. This database is provided by NIST as a public service. Inclusion of records in this database does not represent endorsement or recommendation of standards listed by NIST.
NOTE: This database does not included records related to the Incorporation by Reference for the following: Department of Transportation, Federal Aviation Administration – Airworthiness Directives, State Air Plan Approvals, and Standard Instrumentation Approach Procedures; and the Environmental Protection Agency - State Approval of Air Quality Plans.
Incorporated by (Agency) | FR Citation Sort ascending | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Environmental Protection Agency | 40 CFR 60, Appendix A-7, Method 24, Section 6.1 | ASTM D 1475 | 1990 | Standard Test Method for Density of Paint, Varnish, Lacquer, and Related Products | ASTM International | |
Housing and Urban Development Department | 24 CFR 3280.715(c) | UL 181B | 1995 | Standard for Safety Closure Systems for use with Flexible Air Ducts and Air Connectors, First Edition, with 1998 revisions | Underwriters Laboratories, Inc. | |
Housing and Urban Development Department | 24 CFR 3280.4(a) | ICC/ES All Standards | 0 | All specifications, standards, and codes without specific reference | International Code Council Evaluation Service | |
National Highway Traffic Safety Administration | 49 CFR 572.151 Table A | Drawing No. 921022-054R | 2001 | Arm Assembly, Right | Reprographic Technologies | |
Rural Utilities Service | 7 CFR 1728.97(e)(9) | AWPA M3 | 2005 | Standard Quality Control Procedures for Wood Preserving Plants | American Wood Protection Association | |
Energy Department | 10 CFR 431.66(d)(2)(iii) | ARI 1200 | 2006 | Performance Rating of Commercial Refrigerated Display Merchandisers and Storage Cabinets | Air Conditioning and Refrigeration Institute | |
Rural Utilities Service | 7 CFR 1728.97(a)(6) | RUS Bulletin 50–31 (D–3) | 1979 | RUS Specification for Pole Top Pins | Rural Utilities Service, U.S. Department of Agriculture | |
National Highway Traffic Safety Administration | 49 CFR 571.3(b), 95th percentile adult male | USPHS Publication 1000, Series 11, No. 8 | 0 | Weight, Height, and Selected Body Dimensions of Adults | U.S. Public Health Service, U.S. Department of Health and Human Services | |
Coast Guard | 46 CFR 56.70-15(g)(4) | ASME B31.1 | 2001 | Power Piping ASME Code for Pressure Piping | American Society of Mechanical Engineers | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IA (3) | EPA Method 200.5 | 2003 | Determination of Trace Elements in Drinking Water by Axially Viewed Inductively Coupled Plasma-Atomic Emission Spectrometry, Revision 4.2 | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 136.3(b)(10)(lxviii) | APHA Method 9222 | 1997 | Membrane Filter Technique for Members of the Coliform Group | American Public Health Association | |
Environmental Protection Agency | 40 CFR 799.5085(j) Table 3, A | ASTM E 1147 | 1992 | Standard Test Method for Partition Coefficient (N-Octanol/Water) Estimation by Liquid Chromatography | ASTM International | |
Environmental Protection Agency | 40 CFR 98.238 Field | DOE/EIA0370(08) | 2009 | Oil and Gas Field Code Master List, 2008 Edition 2009 | U.S. Department of Energy | |
Food and Drug Administration | 21 CFR 1040.20(c)(5) | ANSI C81.10 | 1976 | Specifications for Electric Lamp Bases and Holders-Screw Shell Types | American National Standards Institute | |
Environmental Protection Agency | 40 CFR 90, Subpart D, Appendix A, Table 3 | ASTM D 3231 | 1989 | Standard Test Method for Phosphorous in Gasoline | ASTM International | |
Rural Utilities Service | 7 CFR 1728.202(b)(5) | RUS Bulletin 1728H-701 | 1993 | RUS Specification for Wood Crossarms (Solid and Laminated), Transmission Timbers and Pole Keys | Rural Utilities Service, U.S. Department of Agriculture | |
Coast Guard | 46 CFR 160.156-7(b)(6) | Federal Standard 595C | 2008 | Colors Used in Government Procurement | General Services Administration | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IG (DCPA [Dimethyl 2,3,5,6-tetrachloro-terephthalate]) | EPA Method 608.2 | 1993 | Organochlorine Pesticides by Liquid/Liquid Extraction and GC/ECD | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 265.195(f)(2) Note | API 1632 | 0 | Cathodic Protection of Underground Petroleum Storage Tanks and Piping Systems | American Petroleum Institute | |
Environmental Protection Agency | 40 CFR 63.997(e)(2)(iii)(D) | ASTM D 6420 | 1999 | Standard Test Method for Determination of Gaseous Organic Compounds by Direct Interface Gas Chromatography-Mass Spectrometry | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1910.6(c)(1) | ASAE S276.2 | 1968 | Emblem for Identifying Slow Moving Vehicles | American Society of Agricultural Engineers | |
National Highway Traffic Safety Administration | 49 CFR 572.133(b) | Drawing No. 880105-207 | 0 | Upper neck adjusting bracket | Reprographic Technologies | |
Coast Guard | 46 CFR 56.60-1(b) Table 56.60-1(a) | ASTM A 335/A 335M | 1995 | Standard Specification for Seamless Ferritic Alloy-Steel Pipe for High-Temperature Service | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1910 Subpart S Appendix A | ANSI/ASME B30.12 | 2001 | Handling Loads Suspended from Rotor-craft | American Society of Mechanical Engineers | |
Housing and Urban Development Department | 24 CFR 3280.704(b)(5)(i) | NFPA 58 | 2001 | Standard for the Storage and Handling of Liquefied Petroleum Gases | National Fire Protection Association | |
National Highway Traffic Safety Administration | 49 CFR 572.5(a) | Drawing No. SA 150 M071 | 1970 | Left arm assembly | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Coast Guard | 21 CFR 177.1590(c) | ASTM D 968 | 1981 | Standard Test Method for Abrasion Resistance of Organic Coatings by the Falling Abrasive Tester | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1926.951(a)(1)(i) | ANSI J6.2 | 1971 | Rubber Insulating Hoods | American National Standards Institute | |
Housing and Urban Development Department | 24 CFR 200, Appendix A | ANSI/HPMA LHF | 1987 | Laminated Hardwood Flooring | Hardwood Plywood Manufacturers Association | |
Research and Special Programs Administration | 49 CFR 179.102-17(b)(2) | ASTM A 516/A 516M | 1990 | Standard Specification for Pressure Vessel Plates, Carbon Steel, for Moderate and Lower-Temperature Service | ASTM International | |
Coast Guard | 46 CFR 56.01-2(d)(14) | ASME B16.21 | 2005 | Nonmetallic Flat Gaskets for Pipe Flanges | American Society of Mechanical Engineers | |
Environmental Protection Agency | 40 CFR 63.14(g)(43) | ASTM D 3912 | 1980 | Standard Test Method for Chemical Resistance of Coatings Used in Light-Water Nuclear Power Plants | ASTM International | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.198(h)(59) | API RP 14FZ | 2007 | Recommended Practice for Design and Installation of Electrical Systems for Fixed and Floating Offshore Petroleum Facilities for Unclassified and Class I, Zone 0, Zone 1 and Zone 2 Locations | American Petroleum Institute | |
Coast Guard | 46 CFR 154.439 | ABS Publication | 1981 | Rules for Building and Classing Steel Vessels | American Bureau of Shipping | |
Environmental Protection Agency | 40 CFR 136.3(a) Table ID (9) | APHA Method 6410 B | 2000 | Base/Neutral and Acid Extractable Compounds by GC/MS | American Public Health Association | |
Environmental Protection Agency | 40 CFR 141.707(c)(1)(iv) | EPA-821-R-01-026 | 2001 | Cryptosporidium in Water by Filtration/IMS/FA | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 63, Subpart DDDDD, Table 5, 3(c) | ASME PTC 19.10 | 1981 | Flue and Exhaust Gas Analyses [part 10, Instruments and Apparatus] | American Society of Mechanical Engineers | |
Environmental Protection Agency | 40 CFR 60, Appendix A-8, Method 29, Section 18.0, Table 29-3, Footnote 1 | EPA SW-846 | 1996 | Test Methods for Evaluating Solid Waste, Physical/Chemical Methods | U.S. Environmental Protection Agency | |
Food and Drug Administration | 21 CFR 172.665(d)(2) | Food Chemicals Codex | 1996 | Gellan Gum | National Academy Press | |
Food and Drug Administration | 21 CFR 184.1472(a)(2)(vii) | AOCS RP Cd 8b-90 | 1992 | Peroxide Value, Acetic Acid -- Isooctane Method | American Oil Chemists Society | |
Federal Railroad Administration | 49 CFR 227 Appendix F | NIOSH Publication No. 98-126 | 0 | Criteria for a Recommended Standard: Occupational Exposure to Noise | National Institute for Occupational Safety and Health | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (5) | EPA Method 610 (GC) | 1982 | Polynuclear Hydrocarbons by GC/FID | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 141.24(e)(1) Table (2,4-D (as acids, salts, and esters)) | EPA Method 515.1 | 1995 | Chlorinated acids Liquid/Liquid and GC/ECD | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 60.45(f)(5)(i) | ASTM D 1946 | 1994 | Standard Test Method for Analysis of Reformed Gas by Gas Chromatography | ASTM International | |
Federal Communications Commission | 47 CFR 67.1(d) | RFC 4103 | Request for Comments (RFC) 4103, Real-time Transport Protocol Payload for Text Conversation | Internet Engineering Task Force | ||
Housing and Urban Development Department | 24 CFR 100.205(e)(1) | ICC/ANSI A117.1 | 1998 | American National Standard: Accessible and Usable Buildings and Facilities | International Code Council | |
Federal Aviation Administration | 14 CFR 25.981(b)(1) | DOT/FAA/AR-05/8 | 2008 | Fuel Tank Flammability Assessment Method User's Manual | Federal Aviation Administration, U.S. Department of Transportation | |
Housing and Urban Development Department | 24 CFR 200, Appendix A | UM Bulletin 79a | 1982 | Acrylonitrile Butadiene Styrene (ABS) and Poly Vinyl Chloride (PVC) Plastic Drain, Waste and Vent Pipe and Fittings | U.S. Department of Housing and Urban Development | |
Rural Utilities Service | 7 CFR 1755.910(a)(7) | ASTM D 523 | 1989 | Standard Test Method for Specular Gloss | ASTM International | |
Environmental Protection Agency | 40 CFR 75, Appendix D, Section 2.2.5 | ASTM D 4294 | 1998 | Standard Test Method for Sulfur in Petroleum and Petroleum Products by Energy-Dispersive X-Ray Fluorescence Spectrometry | ASTM International |