This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation Sort ascending | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Occupational Safety and Health Administration | 29 CFR 1910.137(c)(2)(ix) Note to paragraph (c)(2)(ix) | ASTM F 478 | 2009 | Standard Specification for In-Service Care of Insulating Line Hose and Covers | ASTM International | |
Environmental Protection Agency | 40 CFR 60.17(g)(179) | ASTM D 6228 | 1998 | Standard Test Method for Determination of Sulfur Compounds in Natural Gas and Gaseous Fuels by Gas Chromatography and Flame Photometric Detection | ASTM International | |
Nuclear Regulatory Commission | 10 CFR 50.55a(f)(4)(i) | ASME OM Code | 2004 | Code for Operation and Maintenance of Nuclear Power Plants | American Society of Mechanical Engineers | |
National Highway Traffic Safety Administration | 49 CFR 572.20 | Drawing No. SA 103C 072 | 1976 | Lower Leg Assembly, Right | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Occupational Safety and Health Administration | 29 CFR 1926.200(c)(1) | ANSI Z53.1 | 1968 | Safety Color Code for Marking Physical Hazards and the Identification of Certain Equipment | American National Standards Institute | |
Food and Drug Administration | 21 CFR 184.1472(a)(2)(v) | AOCS Method Ca 6b-53 | 1989 | Unsaponifiable Matter | American Oil Chemists Society | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (52) | EPA Method 1625 B | 1990 | Semivolatile Organic Compounds by Isotope Dilution GC/MS | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 141.25(a) Table | USGS R-1142-76 | 1977 | Radium-228, dissolved. Determination by separation and counting of actinium-228 | U.S. Geological Survey | |
National Highway Traffic Safety Administration | 49 CFR 572.11(b) | Drawing No. SA 150 M010 | 1987 | Head assembly | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Occupational Safety and Health Administration | 29 CFR 1910.94(a)(2)(iii) | ANSI Z33.1 | 1961 | Installation of Blower and Exhaust Systems for Dust, Stock, and Vapor Removal or Conveying | American National Standards Institute | |
Federal Trade Commission | 16 CFR 303.7 | ISO 2076 | 1999 | Textiles--Man-Made Fibers--Generic Names | International Organization for Standardization | |
Environmental Protection Agency | 40 CFR 136.3(b)(3)(ii)(A) | EPA Method 200.7 | 1994 | Determination of Metals and Trace Elements in Water and Wastes by Inductively Coupled Plasma-Atomic Emission Spectrometry. Revision 4.4 | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 141.23(k)(1) Table (15) Magnesium | APHA Method 3120 B | 1992 | Metals by Inductively Coupled Plasma | American Public Health Association | |
National Highway Traffic Safety Administration | 49 CFR 571.135 S6.2.1 | ASTM E 1136 | 2003 | Standard Specification for Radial Standard Reference Test Tire | ASTM International | |
Research and Special Programs Administration | 49 CFR 178.59(d) | CGA C-3 | 1994 | Standard for Welding and Brazing on Thinned Walled Containers | Compressed Gas Association | |
Environmental Protection Agency | 40 CFR 238.30(b) | ASTM D 3826 | 1991 | Standard Practice for Determining Degradation End Point in Degradable Polyolefins Using a Tensile Test | ASTM International | |
Coast Guard | 46 CFR 12.02-11(d) | STCW Convention | 1995 | STCW--International Convention on Standards of Training, Certification and Watchkeeping for Seafarers | International Maritime Organization | |
Coast Guard | 46 CFR 25.45-2(b)(3) | NFPA 302 | 1998 | Fire Protection Standard for Pleasure and Commercial Motor Craft | National Fire Protection Association | |
Rural Utilities Service | 7 CFR 1755.505(e)(5) | RUS Bulletin 1751F-640 | 2001 | Design of Buried Plant--Physical Considerations | Rural Utilities Service, U.S. Department of Agriculture | |
Environmental Protection Agency | 40 CFR 60, Appendix A-7, Method 24, Section 11.2.2 | ASTM D 2369 | 1995 | Standard Test Method of Volatile Content for Coatings | ASTM International | |
Environmental Protection Agency | 40 CFR 98.124(m)(3) | ASME MFC-5M | 1994 | Measurement of Liquid Flow in Closed Conduits Using Transit-Time Ultrasonic Flowmeters | American Society of Mechanical Engineers | |
Environmental Protection Agency | 40 CFR 60.704(d)(4) | ASTM D 1946 | 1977 | Standard Method for Analysis of Reformed Gas by Gas Chromatography | ASTM International | |
Coast Guard | 46 CFR 52.05-30(b) | ASME B&PV Code | 2001 | Boiler and Pressure Vessel Code, Section I, Rules for Construction of Power Boilers | American Society of Mechanical Engineers | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (44) | EPA Method 365.3 | 1978 | Phosphorus, All Forms (Colorimetric, Ascorbic Acid, Two Reagent) | U.S. Environmental Protection Agency | |
Coast Guard | 46 CFR 56.01-2(e)(64) | ASTM B 283 | 1996 | Standard Specification for Copper and Copper-Alloy Die Forgings (Hot-Pressed) | ASTM International | |
Environmental Protection Agency | 40 CFR 63.1282(g)(4)(iii)(B)(2) | ASTM D 1945 | 2003 | Standard Test Method for Analysis of Natural Gas by Gas Chromatography | ASTM International | |
Coast Guard | 46 CFR 160.151-17 | IMO Resolution MSC.293(87) | 2010 | Annex 7 to MSC 87/26, Report of the Maritime Safety Committee on its Eighty-Seventh Session, Resolution MSC.293(87), Adoption of Amendments to the International Life-Saving Appliance (LSA) Code | International Maritime Organization | |
Environmental Protection Agency | 40 CFR 1043.70(a) | IMO Publication | 2008 | International Convention on the Prevention of Pollution from Ships, MARPOL Annex VI, Regulation 18 | International Maritime Organization | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IG Footnote 3 | EPA Method 619 | 1993 | Triazine Pesticides by Liquid/Liquid Extraction and GC/NPD | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 444.12(b)(1) Table (6) | EPA Method 239.1 | 1971 | Lead (Atomic Absorption, Direct Aspiration) | U.S. Environmental Protection Agency | |
Rural Utilities Service | 7 CFR 1755.902(b)(2) | ITU-T Recommendation G.652 | 2005 | Series G: Transmission Systems and Media, Digital Systems and Networks, Transmission media characteristics—Optical fibre cables, Characteristics of a single-mode optical fibre and cable | International Telecommunication Union--Telecommunication | |
Environmental Protection Agency | 40 CFR 435.13 Note 6 | EPA Method 1644 | 2015 | Method for Conducting a Sediment Toxicity Test with Leptocheirus plumulosus and Non-Aqueous Drilling Fluids or Synthetic-Based Drilling Muds | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IF (1,2-Dichloroethane) | EPA Method 502.2 | 1995 | Volatile Organic Compounds (Drinking Water) by GC/PID/ELCD | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 147.950(a)(3)(v) | LAUIC regulations | 1983 | Amendment to Statewide Order No. 29-B (Amendment concerning the offsite disposal of drilling mud and saltwater) (effective May 20, 1983) | State of Louisiana | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.1629(b)(4)(v) | API RP 14FZ | 2007 | Recommended Practice for Design and Installation of Electrical Systems for Fixed and Floating Offshore Petroleum Facilities for Unclassified and Class I, Zone 0, Zone 1 and Zone 2 Locations | American Petroleum Institute | |
Rural Utilities Service | 7 CFR 1755.200(a)(3) | IEEE NESC | 1993 | National Electrical Safety Code | Institute of Electrical and Electronics Engineers | |
Occupational Safety and Health Administration | 29 CFR 1910.136(b)(1)(iii) | ANSI Z41 | 1991 | Personal Protection-Protective Footwear | American National Standards Institute | |
Environmental Protection Agency | 40 CFR 147.2550(a)(1) | WYUIC regulations | 1977 | Wyoming Environmental Quality Act, Wyoming Statutes sections 35-11-101 through 35-11-115, and 35-11-301 through 35-11-305 (1977 Republished Edition and 1989 Cumm. Supp.) | State of Wyoming | |
Occupational Safety and Health Administration | 29 CFR 1910.6(f)(2) | API 12B | 1958 | Specification for Bolted Production Tanks | American Petroleum Institute | |
Coast Guard | 21 CFR 101.9(c)(1)(i)(A) | USDA Handbook 74 | 1973 | Energy Values of Foods: Basis and Derivation | U.S. Department of Agriculture | |
Food and Drug Administration | 21 CFR 184.1063(b) | Food Chemicals Codex | 1996 | Enzyme-modified Lecithin | National Academy Press | |
Coast Guard | 21 CFR 173.370(c) | Ecolab Publication | 2000 | Hydrogen Peroxide and Peracid (as Peracetic Acid) Content | Ecolab Inc. | |
National Highway Traffic Safety Administration | 49 CFR 572.141 Table A | Drawing No. 210-5000-1(L) | 2001 | Leg Assembly | Reprographic Technologies | |
Environmental Protection Agency | 40 CFR 63.99(a)(8)(i) | DE State Regulations | 1999 | Accidental Release Prevention Regulation, sections 1 through 5 and sections 7 through 14 | State of Delaware, Department of Natural Resources | |
Environmental Protection Agency | 40 CFR 94.1004(d)(2) | Annex VI of MARPOL 73/78 | 1997 | Technical Code on Control of Emission of Nitrogen Oxides from Marine Diesel Engines | International Maritime Organization | |
Coast Guard | 46 CFR 120.320(e) | NFPA 70 | 1996 | National Electrical Code (NEC) Article 430 | National Fire Protection Association | |
National Highway Traffic Safety Administration | 49 CFR 572.76(a) | Drawing No. SA 106C 001 | 1997 | Specifications for an Anthropomorphic Test Dummy Representing a 6-year-old Child, sheet 2 | Reprographic Technologies | |
Coast Guard | 46 CFR 164.018-5(a)(5) | Federal Test Method Standard 141A | 1974 | Paint, Varnish, Lacquer and Related Materials: Methods of Inspection, Sampling, and Testing, Method 6141, Washability of Paints and Testing | Federal Specifications Standards and Test Methods | |
Environmental Protection Agency | 40 CFR 60.41da Lignite | ASTM D 388 | 1995 | Standard Classification of Coals by Rank | ASTM International | |
Environmental Protection Agency | 40 CFR 63.8600(e)(10) | EPA-454/R-98-015 | 1997 | Fabric Filter Bag Leak Detection Guidance | U.S. Environmental Protection Agency |