This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation Sort ascending | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Environmental Protection Agency | 40 CFR 63, Subpart DDDDD, Table 6, 2(f) | ASTM D 6721 | 2001 | Standard Test Method for Determination of Chlorine in Coal by Oxidative Hydrolysis Microcoulometry | ASTM International | |
Rural Utilities Service | 7 CFR 1755.506(z)(3)(i) | NFPA 70 | 1999 | National Electrical Code | National Fire Protection Association | |
Coast Guard | 46 CFR 10.201(a) | STCW Code | 1995 | Seafarer's Training, Certification and Watchkeeping Code | International Maritime Organization | |
Occupational Safety and Health Administration | 29 CFR 1910.263(i)(24)(ii) | ASME B&PV Code | 1968 | Boiler and Pressure Vessel Code, Section VIII | American Society of Mechanical Engineers | |
Environmental Protection Agency | 40 CFR 98.7(h)(1) | NLA Publication | 2008 | CO2 Emissions Calculation Protocol for the Lime Industry—English Units Version, February 5, 2008 Revision | National Lime Association | |
Rural Utilities Service | 7 CFR 1755.390(a)(7) | ASTM B 224 | 1980 | Standard Classification of Coppers | ASTM International | |
Coast Guard | 46 CFR 54.15-13(a) | ASME B&PV Code | 1998 | Boiler and Pressure Vessel Code, Section VIII, Division 1, Rules for Construction of Pressure Vessels (with 1999 and 2000 addenda) | American Society of Mechanical Engineers | |
Occupational Safety and Health Administration | 29 CFR 1910.6(e)(22) | ANSI B31.1 | 1955 | Code for Pressure Piping | American National Standards Institute | |
Federal Communications Commission | 47 CFR 80.1101(c)(13)(i) | IEC 1097-1 | 1992 | Global Maritime Distress and Safety System (GMDSS)--Part 1: Radar transponder--Marine Search and Rescue (SART)--Operational and Performance Requirements, Methods of Testing and Required Test Results | International Electrotechnical Commission | |
Coast Guard | 46 CFR 160.049-3(c)(3) | 46 CFR 160.055 | 2012 | Life Preserver, Unicellular Plastic Foam, Adult and Child | U.S. Coast Guard | |
Occupational Safety and Health Administration | 29 CFR 1910 Subpart L Appendix B 1910.158 | NFPA 1231 | 1993 | Water Supplies for Suburban and Rural Fire Fighting | National Fire Protection Association | |
Public Health Service | 42 CFR 37.44(g)(3) | AAPM Report No. 93 | 2006 | Acceptance Testing and Quality Control of Photostimulable Storage Phosphor Imaging Systems | American Association of Physicists in Medicine | |
National Highway Traffic Safety Administration | 49 CFR 571.5(f)(1) | FedSpec L-S-300 | 1965 | Sheeting and Tape, Reflective: Nonexposed Lens, Adhesive Backing | Federal Specifications Standards and Test Methods | |
Environmental Protection Agency | 40 CFR 136.3(a) Table ID (35) | EPA Method 508 | 1995 | Determination of Chlorinated Pesticides in Water by Gas Chromatography with an Electron Capture Detector - Revision 3.1 | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 143.4(b) Table (Silver) | APHA Method 3113 B | 1995 | Metals by Graphite Furnace Atomic Absorption | American Public Health Association | |
Environmental Protection Agency | 40 CFR 60.107a(d)(6)(iii) | ASME MFC-9M | 1988 | Measurement of Liquid Flow in Closed Conduits by Weighing Method | American Society of Mechanical Engineers | |
Occupational Safety and Health Administration | 29 CFR 1926.300(b)(2) | ANSI B15.1 | 1958 | Safety Code for Mechanical Power Transmission Apparatus | American National Standards Institute | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.198(h)(3) | API Bulletin 2INT-EX | 2007 | Interim Guidance for Assessment of Existing Offshore Structures for Hurricane Conditions | American Petroleum Institute | |
Occupational Safety and Health Administration | 29 CFR 1926.6(dd)(2) | SAE Publication | 1971 | SAE Handbook | Society of Automotive Engineers | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (35) | APHA Method 6200 B | 1997 | Volatile Organic Compounds by Purge and Trap GC/MS | American Public Health Association | |
Environmental Protection Agency | 40 CFR 141.24(h)(13)(ii) | EPA Method 508a | 1989 | Screening for Polychlorinated Bipheyles by Perchlorination and Gas Chromatography | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 58 Appendix E, 12.0(7) | EPA-600-4-77-034 | 1977 | Summary of LACS Integrated Pollutant Data. Rodes, C.E. and G.F. Evans. | U.S. Environmental Protection Agency | |
Food and Drug Administration | 21 CFR 177.1020(b) | FDA Publication | 1985 | Analysis of Cycopaco Resin for Residual b-(2-Hydroxyethyl mercapto) propionitrile | Food and Drug Administration, U.S. Department of Health and Human Services | |
Coast Guard | 24 CFR 3280.803(k)(3)(iii) | NFPA 70 | 2005 | National Electrical Code | National Fire Protection Association | |
Environmental Protection Agency | 40 CFR 52, Subpart U | MESIP | 1979 | State Implementation Plan with Regulatory and Nonregulatory Revisions | State of Maine | |
Environmental Protection Agency | 40 CFR 141.131(a)(2) | ASTM D 1253 | 1996 | Standard Test Method for Residual Chlorine in Water | ASTM International | |
Environmental Protection Agency | 40 CFR 63, Subpart DDDDD, Table 6, 2(f) | ASTM E 776 | 1987 | Standard Test Method for Forms of Chlorine in Refuse-Derived Fuel | ASTM International | |
Food and Drug Administration | 21 CFR 184.1069(b) | Food Chemicals Codex | 1981 | Malic Acid | National Academy Press | |
Energy Department | 10 CFR 440 Appendix A | FedSpec TT-S-1657 | 1970 | Sealing Compound, Single Component Butyl Rubber Base, Solvent Release Type (for Buildings and Other Types of Construction) | Federal Specifications Standards and Test Methods | |
Coast Guard | 46 CFR 111.01-9(c) | IEC 60529 | 2001 | Degrees of Protection Provided by Enclosures (IP Code), Edition 2.1 | International Electrotechnical Commission | |
Research and Special Programs Administration | 49 CFR 192.7(c)(2) B2 | API RP 5L1 | 2002 | Recommended Practice for Railroad Transportation of Line Pipe | American Petroleum Institute | |
Rural Utilities Service | 7 CFR 1755.97(b)(14) | RUS Bulletin 1753F-150, Form 515a | 2012 | Specifications and Drawings for Construction of Direct Buried Plant | Rural Utilities Service, U.S. Department of Agriculture | |
Environmental Protection Agency | 40 CFR 60.17(g)(51) | ASTM D 1137 | 1975 | Standard Method for Analysis of Natural Gases and Related Types of Gaseous Mixtures by the Mass Spectrometer | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1910.6(k)(9) | CGA S-1.2 | 1963 | Safety Release Device Standards-Cargo and Portable Tanks for Compressed Gases | Compressed Gas Association | |
Housing and Urban Development Department | 24 CFR 3285.702(e)(1) | NFPA 70 | 2005 | National Electrical Code | National Fire Protection Association | |
Coast Guard | 46 CFR 177.410(b)(5) | ASTM E 84 | 1998 | Standard Test Method for Surface Burning Characteristics of Building Materials | ASTM International | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (37) | USGS I-4471-97 | 1997 | Metals by Inductively Coupled Plasma | U.S. Geological Survey | |
Environmental Protection Agency | 40 CFR 141.23(k)(1) Table (10) Copper | EPA Method 200.8 | 1995 | Metals by ICP-MS | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 435 Appendix 5, Subpart A | EPA Method 1655 | 2015 | Determination of Crude Oil Contamination in Non-Aqueous Drilling Fluids by Gas Chromatography/Mass Spectrometry (GC/MS) | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 82, Subpart B, Appendix A, Recommended Service Procedure, Section 1 | SAE J-1990 | 1990 | Extraction and Recycle Equipment for Mobile Automotive Air-Conditioning Systems | Society of Automotive Engineers | |
Environmental Protection Agency | 40 CFR 60.17(g)(140) | ASTM D 3792 | 1991 | Standard Test Method for Water Content of Water-Reducible Paints by Direct Injection into a Gas Chromatograph | ASTM International | |
Coast Guard | 46 CFR 160.135-5(c)(1) | Federal Standard 595C | 2008 | Colors Used in Government Procurement | Federal Specifications Standards and Test Methods | |
National Highway Traffic Safety Administration | 49 CFR 572.186(a) | Drawing No. 175-5000 | 2009 | Abdominal Assembly | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Environmental Protection Agency | 40 CFR 136.3(b)(20)(iv) | IDEXX Test Methods | 2002 | Quanti-Tray® Method | IDEXX Laboratories | |
Environmental Protection Agency | 40 CFR 63, Subpart UUUUU, Table 1, (1)(b) | ASTM D 6348 | 2003 | Standard Test Method for Determination of Gaseous Compounds by Extractive Direct Interface Fourier Transform Infrared (FTIR) Spectroscopy | ASTM International | |
Federal Communications Commission | 47 CFR 80.1101(d)(1)(ii) | IMO Resolution A.804(19) | 1995 | Performance Standards for Shipborne MF Radio Installations Capable of Voice Communication and Digital Selective Calling | International Maritime Organization | |
Environmental Protection Agency | 40 CFR 136.3(b)(13)(i) | AOAC Official Methods | 1998 | Official Methods of Analysis, 16th Edition, 4th Revision | AOAC International | |
Energy Department | 10 CFR 431.15(b)(5) | IEC 60050-411 | 1996 | International Electrotechnical Vocabulary | International Electrotechnical Commission | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 178.71(h) | ISO 7866 | 1999 | Gas Cylinders--Refillable Seamless Aluminum Alloy Gas Cylinders--Design, Construction and Testing | International Organization for Standardization | |
Environmental Protection Agency | 40 CFR 147.550(a)(4) | GAUIC regulations | 1988 | Georgia Administrative Procedure Act, O.C.G.A. §§ 50-13-1 through 50-13-22 (Reprinted from the O.C.G.A. and 1988 Cumm. Supp.) | State of Georgia |