DISCLAIMER: Data and information released from the Standards Incorporated by Reference databases at NIST are provided on an "AS IS" basis, without representation or warranty of any kind, including without limitation the warranties of merchantability, fitness for a particular purpose and non-infringement. Data and/or information in this database may contain errors or may be incomplete. Please email standardsinfo@nist.gov if you identified missing information or incorrect information. This database is provided by NIST as a public service. Inclusion of records in this database does not represent endorsement or recommendation of standards listed by NIST.
NOTE: This database does not included records related to the Incorporation by Reference for the following: Department of Transportation, Federal Aviation Administration – Airworthiness Directives, State Air Plan Approvals, and Standard Instrumentation Approach Procedures; and the Environmental Protection Agency - State Approval of Air Quality Plans.
Incorporated by (Agency) | FR Citation Sort ascending | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Food and Drug Administration | 21 CFR 172.320(b)(1) | Food Chemicals Codex | 1981 | Food Chemicals Codex, 3rd Edition | National Academy of Sciences, National Research Council | |
Labor Department | 41 CFR 50-204.66(a) | CGA G-1 | 1966 | Acetylene | Compressed Gas Association | |
Research and Special Programs Administration | 49 CFR 174.63(c)(3) | AAR Specification M-943 | 1988 | Container Chassis For TOFC Service | Association of American Railroads | |
Environmental Protection Agency | 40 CFR 63.14(d)(2) | API 2518 | 1991 | Evaporative Loss from Fixed-roof Tanks, Second Edition | American Petroleum Institute | |
Environmental Protection Agency | 40 CFR 300.915(b)(8) | ASTM D 93 | 1990 | Standard Test Method for Flash Point by Pensky-Martens Closed Cup Tester | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1910.268(n)(11)(iv) | ANSI J6.6 | 1971 | Rubber Insulating Gloves | American National Standards Institute | |
Coast Guard | 46 CFR 114.600(b) | UL 1573 | 1995 | Stage and Studio Lighting Units | Underwriters Laboratories, Inc. | |
National Highway Traffic Safety Administration | 49 CFR 572.72(a) | Drawing No. SA 106C 001 | 0 | Specifications for an Anthropomorphic Test Dummy Representing a 6-year-old Child, sheet 2 | Reprographic Technologies | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IE (5) | ASTM D 2460 | 1997 | Standard Test Method for Alpha-Particle-Emitting Isotopes of Radium in Water | ASTM International | |
Food and Drug Administration | 21 CFR 173.165(d) | Food Chemicals Codex | 1981 | Candida Lipolytica | National Academy Press | |
Health and Human Services Department | 45 CFR 162.1702(a) | ASC X12N 820 | 2002 | Addenda to Payroll Deducted and Other Group Premium Payment of Insurance Products, version 4010 | Washington Publishing Company | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.198(l)(1) | AGA Report No. 7 | 2006 | Measurement of Natural Gas by Turbine Meters | American Gas Association | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (84) | EPA Method 625 | 1982 | Base/Neutrals and Acids by GC/MS | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 141.74(a)(2) Table Note 3 | ASTM Annual Book of Standards | 2004 | Water and Environmental Technology, Section 11.01 | ASTM International | |
Environmental Protection Agency | 40 CFR 61.18(a)(8) | ASTM D 2504 | 1977 | Standard Test Method for Noncondensable Gases in C3 and Lighter Hydrocarbon Products by Gas Chromatography | ASTM International | |
Food and Drug Administration | 21 CFR 178.3770(b)(1) | ASTM D 566 | 1982 | Standard Test Method for Dropping Point of Lubricating Grease | ASTM International | |
Environmental Protection Agency | 40 CFR 141.23(k)(1) Table (23) Silica | APHA Method 4500-SiO2 F | 1995 | Flow Injection Analysis for Molybdate-Reactive Silicate | American Public Health Association | |
Environmental Protection Agency | 40 CFR 60.251(q) Subbituminous coal | ASTM D 388 | 1990 | Standard Classification of Coals by Rank | ASTM International | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.869(c) | API RP 14C | 2001 | Recommended Practice for Analysis, Design, Installation, and Testing of Basic Surface Safety Systems for Offshore Production Platforms | American Petroleum Institute | |
Housing and Urban Development Department | 24 CFR 3280.4(a) | ASME All Standards | 0 | All specifications, standards and codes without specific reference | American Society of Mechanical Engineers | |
Environmental Protection Agency | 40 CFR 1065.1010(e)(8) | ISO 8754 | 2003 | Petroleum products--Determination of sulfur content--Energy-dispersive X-ray fluorescence spectrometry | International Organization for Standardization | |
Rural Utilities Service | 7 CFR 1755.890(k)(10)(iii)(A) | ICEA S-84-608 | 1988 | Standard for Telecommunications Cable, Filed, Polyolefin Insulated, Copper Conductor Technical Requirements | Insulated Cable Engineers Association | |
Environmental Protection Agency | 40 CFR 60.261(v) Calcium silicon | ASTM A 495 | 1976 | Standard Specification for Calcium-Silicon and Calcium Manganese-Silicon | ASTM International | |
Consumer Product Safety Commission | 16 CFR 1615.1(o)(10)(i) | ANSI Z535.1 | 1998 | Standard for Safety Color Code | American National Standards Institute | |
Housing and Urban Development Department | 24 CFR 3280.604(b)(2) | ASME A112.4.1 | 1993 | Water Heater Relief Valve Drain Tubes | American Society of Mechanical Engineers | |
National Highway Traffic Safety Administration | 49 CFR 572.140(a)(1)(vi) | Drawing No. 210-6000-1(L) | 2000 | Arm Assembly | Reprographic Technologies | |
National Oceanic and Atmospheric Administration | 50 CFR 226.205 | USGS Paper 2294 | 1987 | Hydrologic Unit Maps, Water Supply | U.S. Geological Survey | |
Rural Utilities Service | 7 CFR 1755.506(r) | 7 CFR 1755.510 | 0 | Construction and assembly unit drawings | Rural Utilities Service, U.S. Department of Agriculture | |
National Highway Traffic Safety Administration | 49 CFR 572.160(a)(1)(iv) | LM Drawing No. 167–3000 | 2009 | Lower Torso Assembly | Leet-Melbrook | |
National Highway Traffic Safety Administration | 49 CFR 572.143(a) | Drawing No. 210-2015 | 0 | Neck Molded Assembly | Reprographic Technologies | |
Coast Guard | 46 CFR 56.60-1(b) Table 56.60-1(b) | ASME B16.42 | 1998 | Ductile Iron Pipe Flanges and Flanged Fittings, Classes 150 and 300 | American Society of Mechanical Engineers | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (60) | USGS I-3667-85 | 1985 | Selenium, total, atomic absorption spectrometric, hydride | U.S. Geological Survey | |
Food and Drug Administration | 21 CFR 172.858(a) | Food Chemicals Codex | 1981 | Propylene Glycol Alginate | National Academy Press | |
National Archives and Records Administration | 36 CFR 1238.12(c) | AIIM MS19 | 1993 | Standard Recommended Practice--Identification of Microforms | Association for Information and Image Management | |
Coast Guard | 46 CFR 160.156-5(c)(1) | Federal Standard 595C | 2008 | Colors Used in Government Procurement | General Services Administration | |
Environmental Protection Agency | 40 CFR 1066.1005 | NIST Special Publication 811 | 2008 | Guide for the Use of the International System of Units (SI) | National Institute of Standards and Technology, U.S. Department of Commerce | |
Environmental Protection Agency | 40 CFR 136.3(b)(10)(xxxv) | APHA Method 4140 | 1997 | Inorganic Anions by Capillary Ion Electrophoresis | American Public Health Association | |
Environmental Protection Agency | 40 CFR 799.5085(h)(2) | ASTM E 324 | 1999 | Standard Test Method for Relative Initial and Final Melting Points and the Melting Range of Organic Chemicals | ASTM International | |
Environmental Protection Agency | 40 CFR 98.174(b)(2)(v) | ISO/TR 15349-1 | 1988 | Unalloyed steel—Determination of low carbon content. Part 1: Infrared absorption method after combustion in an electric resistance furnace (by peak separation), First Edition | International Organization for Standardization | |
Occupational Safety and Health Administration | 29 CFR 1910.265(d)(2)(i)(A) | ANSI A11.1 | 1970 | Practice for Industrial Lighting | American National Standards Institute | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IG (Bromoxynil octanoate) | EPA Method 1656 | 1993 | The Determination of Organo-Halide Pesticides in Municipal and Industrial Wastewater | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 265.314(e)(2)(ii) | ASTM G 22 | 1976 | Standard Practice for Determining Resistance of Plastics to Bacteria | ASTM International | |
Environmental Protection Agency | 40 CFR 63.309(k)(1)(iii) | ASME PTC 19.10 | 1981 | Flue and Exhaust Gas Analyses [part 10, Instruments and Apparatus] | American Society of Mechanical Engineers | |
Coast Guard | 40 CFR 1065.705 Table 1 | ISO 3675 | 1998 | Crude petroleum and liquid petroleum products--Laboratory determination of density--Hydrometer method | International Organization for Standardization | |
Mine Safety and Health Administration | 30 CFR 56.14131(d) | SAE J-386 | 1993 | Operator Restraint Systems for Off-Road Work Machines | Society of Automotive Engineers | |
Coast Guard | 21 CFR 145.145(c)(2) | AOAC Official Methods | 1980 | Official Methods of Analysis | AOAC International | |
National Highway Traffic Safety Administration | 49 CFR 571.108 S14.4.2.2.4.4 | ASTM E 308 | 1981 | Standard Practice for Spectrophotometry and Description of Color in CIE 1931 System | ASTM International | |
Coast Guard | 46 CFR 56.01-2(e)(68) | ASTM E 23 | 1996 | Standard Test Methods for Notched Bar Impact Testing of Metallic Materials | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1926.1433(a) | ANSI B30.5 | 1968 | Safety Code for Crawler, Locomotive and Truck Cranes | American National Standards Institute | |
National Highway Traffic Safety Administration | 49 CFR 572.31(a)(3) | Drawing No. 78051-89 | 1978 | Upper Torso Assembly | General Motors Corporation |