This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation Sort ascending | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Pipeline and Hazardous Materials Safety Administration | 49 CFR 178.75(d)(3)(ii) | ISO 9809-2 | 2000 | Gas Cylinders--Refillable Seamless Steel Gas Cylinders--Design, Construction and Testing--Part 2: Quenched and Tempered Steel Cylinders with Tensile Strength Greater than or Equal to 1 100 MPa | International Organization for Standardization | |
Energy Department | 10 CFR 430.2, Definitions, General service incandescent lamp (21) | ANSI C79.1 | 2002 | Nomenclature for Glass Bulbs Intended for Use with Electric Lamps | American National Standards Institute | |
Environmental Protection Agency | 40 CFR 98.164(b)(5)(iii) | ASTM D 2013 | 2007 | Standard Method of Preparing Coal Samples for Analysis | ASTM International | |
Coast Guard | 33 CFR 154, Appendix B, 7.1 | ASME B&PV Code | 2005 | Section VIII, Division 1, Pressure Vessels | American Society of Mechanical Engineers | |
Coast Guard | 46 CFR 160.023-3(a) | MIL-S-18655 | 1971 | Signal, Smoke, and Illumination, Marine, Mark 13, Mod 0 | U.S. Department of Defense | |
Coast Guard | 46 CFR 164.120-7, Table 164.120-7(c)(1)(iii) | ASTM D 1045 | 2008 | Standard Test Methods of Sampling and Testing Plasticizers used in Plastics | ASTM International | |
Environmental Protection Agency | 40 CFR 75.6(a)(41) | ASTM D 5373 | 2002 | Standard Test Methods for Instrumental Determination of Carbon, Hydrogen, and Nitrogen in Laboratory Samples of Coal and Coke | ASTM International | |
Rural Utilities Service | 7 CFR 1755.97(b)(15) | RUS Bulletin 1753F-151, Form 515b | 2001 | Specifications and Drawings for Construction of Underground Plant | Rural Utilities Service, U.S. Department of Agriculture | |
Occupational Safety and Health Administration | 29 CFR 1910.94(c)(3)(i) | ANSI Z9.2 | 1960 | Fundamentals Governing the Design and Operation of Local Exhaust Systems | American National Standards Institute | |
Environmental Protection Agency | 40 CFR 63.11980(a)(2)(ii) | EPA SW-846-8270D | 2007 | Semivolatile Organic Compounds by Gas Chromatography/Mass Spectrometry (GC/MS), Revision 4 | U.S. Environmental Protection Agency | |
Coast Guard | 46 CFR 160.077-19(c)(16) | UL 1517 | 2012 | Hybrid Personal Flotation Devices | Underwriters Laboratories, Inc. | |
Coast Guard | 46 CFR 169.115(c)(3) | NFPA 70 | 1980 | National Electrical Code | National Fire Protection Association | |
Coast Guard | 46 CFR 54.01-1(c)(3) | ASTM A 370 | 1997 | Standard Test Method and Definitions for Mechanical Testing of Steel Products | ASTM International | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (31) | EPA Method 350.1 | 1993 | Ammonia Nitrogen - Colorimetric, Auto Phenate, Revision 2.0 | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 141.23(k)(1) Table (4) Asbestos | EPA Method 100.2 | 1994 | Determination of Asbestos Structure Over 10-?m In Length In Drinking Water, EPA-600-R-94-134 | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 55.14(e)(3)(ii)(E) | 40 CFR part 52, subpart F | 2000 | State of California, San Luis Obispo County Air Pollution Control District Requirements Applicable to OCS Sources | U.S. Environmental Protection Agency | |
Occupational Safety and Health Administration | 29 CFR 1910.6(h)(13) | ASTM D 56 | 2005 | Standard Test Method for Flash Point by Tag Closed Cup Tester | ASTM International | |
National Highway Traffic Safety Administration | 49 CFR 572.1`77(b)(8) | Drawing No. SA-572-S4 | 1987 | Accelerometer Specification | Reprographic Technologies | |
Environmental Protection Agency | 40 CFR 136.3(b)(10)(xxii) | APHA Method 3500-Al | 2001 | Aluminum | American Public Health Association | |
Environmental Protection Agency | 40 CFR 430.01(a) | EPA Method 1650 | 2014 | Adsorbable Organic Halides by Adsorption and Coulometric Titration | U.S. Environmental Protection Agency | |
Research and Special Programs Administration | 49 CFR 195.264(e)(3) | API 620 | 2002 | Design and Construction of Large Welded Low Pressure Storage Tanks | American Petroleum Institute | |
Environmental Protection Agency | 40 CFR 86.113-04(a)(2)(i) | CAARB Publication | 1996 | California Regulatory Requirements Applicable to the National Low Emission Vehicle Program | California Air Resources Board | |
Energy Department | 10 CFR 440 Appendix A | ASTM C 570 | 1989 | Oil and Resin Based Caulking Compound for Building Construction | ASTM International | |
Environmental Protection Agency | 40 CFR 136.3(b)(25)(i) | NCASI Technical Bulletin 253 | 1971 | An Investigation of Improved Procedures for Measurement of Mill Effluent and Receiving Water Color | National Council of the Paper Industry for Air and Stream Improvement, Inc. | |
Research and Special Programs Administration | 49 CFR 173.301(f)(1) | CGA C-12 | 1979 | Qualification Procedure for Acetylene Cylinder Design | Compressed Gas Association | |
Public Health Service | 42 CFR 84.113 | ANSI K13.1 | 1973 | Identification of Air-Purifying Respirator Canisters and Cartridges | American National Standards Institute | |
Food and Drug Administration | 21 CFR 165.110(b)(4)(iii)(F)(20) | EPA Method 1613 | 1990 | Tetra-through-Octa-Chlorinated Dioxins and Furans by Isotope Dilution HRGC/HRMS | U.S. Environmental Protection Agency | |
National Highway Traffic Safety Administration | 49 CFR 572.15(a) | Drawing No. SA 103C 082 | 1976 | Foot Assembly Right | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Food and Drug Administration | 21 CFR 178.3620(c)(1)(ii) | ASTM D 1500 | 1982 | Standard Method of Test for ASTM Color of Petroleum Products (ASTM Color Scale) | ASTM International | |
Coast Guard | 46 CFR 110.10-1(g)(14) | IEC 79-18 | 1992 | Electrical Apparatus for Explosive Gas Atmospheres | International Electrotechnical Commission | |
Coast Guard | 46 CFR 52.05-30(a) | ASME B&PV Code | 2001 | Boiler and Pressure Vessel Code, Section I, Rules for Construction of Power Boilers | American Society of Mechanical Engineers | |
Federal Communications Commission | 47 CFR 15.31(a)(2) | ANSI C63.17-2013 | 2013 | American National Standard Methods of Measurement of the Electromagnetic and Operational Compatibility of Unlicensed Personal Communications Services (UPCS) Device | American National Standards Institute | |
Nuclear Regulatory Commission | 10 CFR 50.55a(b)(2)(xxvi) | ASME B&PV Code | 1998 | Boiler and Pressure Vessel Code, Section XI, IWA-4540(c) | American Society of Mechanical Engineers | |
Occupational Safety and Health Administration | 29 CFR 1910.6(e)(67) | ANSI Z535.2 | 2011 | Environmental and Facility Safety Signs | American National Standards Institute | |
Energy Department | 10 CFR 430.3(e)(3) | ASHRAE 37 | 2005 | Methods of Testing for Rating Unitary Air-Conditioning and Heat Pump Equipment | American Society of Heating, Refrigerating and Air Conditioning Engineers | |
Coast Guard | 21 CFR 177.1520(d)(1) | ASTM D 1505 | 1979 | Standard Test Method for Density of Plastics by the Density-Gradient Technique | ASTM International | |
National Highway Traffic Safety Administration | 49 CFR 571.5(l)(45) | SAE J-1703b | 1970 | Motor Vehicle Brake Fluid | Society of Automotive Engineers | |
Mine Safety and Health Administration | 30 CFR 57.14130(j) | SAE J-386 | 1997 | Operator Restraint Systems for Off-Road Work Machines | Society of Automotive Engineers | |
Environmental Protection Agency | 40 CFR 136.3(a) Table ID (42) | USGS O-3104-83 | 1983 | Whole-water recoverable organophosphate pesticides | U.S. Geological Survey | |
Environmental Protection Agency | 40 CFR 147.2650(a)(2) | PRUIC regulations | 1988 | Puerto Rico Public Policy Environmental Act (PRPPE), Title 12 Laws of Puerto Rico Annotated (LPRA) Chapters 121 and 131, 1977 edition, as amended 1988 edition, and Chapter 122 | Commonwealth of Puerto Rico | |
National Highway Traffic Safety Administration | 49 CFR 571.209 S4.1(f) | SAE J-800c | 1973 | Recommended Practice, Motor Vehicle Seat Belt Installations | Society of Automotive Engineers | |
Surface Mining Reclamation and Enforcement Office | 30 CFR 870.19 Table 2 | ASTM D 5192 | 1991 | Standard Practice for Collection of Coal Samples from Core | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1926.100(b)(1)(ii) | ANSI Z89.1 | 2003 | Safety Requirements for Industrial Head Protection | American National Standards Institute | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (47) | APHA Method 6200 C | 1997 | Volatile Aromatic Organic Compounds by GC/PID Purge & Trap | American Public Health Association | |
Environmental Protection Agency | 40 CFR 141.25(a) Table | APHA Method 7500-3H | 2000 | Tritium-Liquid Scintillation Spectrometric Method | American Public Health Association | |
Environmental Protection Agency | 40 CFR 60.4415(a)(1)(i) | ASTM D 129 | 1995 | Standard Test Method for Sulfur in Petroleum Products (General Bomb Method) | ASTM International | |
Rural Utilities Service | 7 CFR 1755.890(f)(2) | ICEA S-84-608 | 1988 | Standard for Telecommunications Cable, Filed, Polyolefin Insulated, Copper Conductor Technical Requirements | Insulated Cable Engineers Association | |
Environmental Protection Agency | 40 CFR 94.108(a)(1) Table B-5 | ASTM D 129 | 2000 | Standard Test Method for Sulfur in Petroleum Products (General Bomb Method) | ASTM International | |
Environmental Protection Agency | 40 CFR 60, Appendix A-7, Method 25, Section 7.1.3 | ASTM D 2986 | 1971 | Standard Method for Evaluation of Air, Assay Media by the Monodisperse DOP (Dioctyl Phthalate) Smoke Test | ASTM International | |
Coast Guard | 30 CFR 250.901(d)(2) | ANSI/AISC 360 | 2005 | Specification for Structural Steel Buildings | American Concrete Institute |