DISCLAIMER: Data and information released from the Standards Incorporated by Reference databases at NIST are provided on an "AS IS" basis, without representation or warranty of any kind, including without limitation the warranties of merchantability, fitness for a particular purpose and non-infringement. Data and/or information in this database may contain errors or may be incomplete. Please email standardsinfo@nist.gov if you identified missing information or incorrect information. This database is provided by NIST as a public service. Inclusion of records in this database does not represent endorsement or recommendation of standards listed by NIST.
NOTE: This database does not included records related to the Incorporation by Reference for the following: Department of Transportation, Federal Aviation Administration – Airworthiness Directives, State Air Plan Approvals, and Standard Instrumentation Approach Procedures; and the Environmental Protection Agency - State Approval of Air Quality Plans.
Incorporated by (Agency) | FR Citation Sort ascending | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Research and Special Programs Administration | 21 CFR 172.615(a) | ASTM D 2008 | 1980 | Standard Test Method for Ultraviolet Absorbance and Absorptivity of Petroleum Products | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1910.111(b)(1)(i) | ANSI K61.1 | 0 | Storage and Handling of Anhydrous Ammonia | American National Standards Institute | |
Environmental Protection Agency | 40 CFR 91.6(b)(2) Table | ISO 8665 | 1991 | Small Craft-Marine Propulsion Engine and Systems-Power Measurements and Declarations | International Organization for Standardization | |
Environmental Protection Agency | 40 CFR 63.11(b)(6)(ii) | ASTM D 2382 | 1988 | Standard Test Method for Heat of Combustion of Hydrocarbon Fuels by Bomb Calorimeter (High-Precision Method) | ASTM International | |
Coast Guard | 46 CFR 111.105-3 | IEC 60079 | 0 | Electrical Apparatus for Explosive Gas Atmospheres Series | International Electrotechnical Commission | |
Occupational Safety and Health Administration | 29 CFR 1910.6(i)(5) | AWS D2.0 | 1969 | Specifications for Welding Highway and Railway Bridges | American Welding Society | |
Food and Drug Administration | 21 CFR 172.869(b)(8) | Food Chemicals Codex | 1997 | Sucrose Fatty Acid Esters | National Academy Press | |
Environmental Protection Agency | 40 CFR 147.701(a)(4) | ILUIC regulations | 1981 | Illinois Department of Mines and Minerals Regulations for the Oil and Gas Division, Rules I, II, IIA, III, V, VII, and IX | State of Illinois | |
Environmental Protection Agency | 40 CFR 63, Subpart UUUUU, Table 5, (3)(c) | ASME PTC 19.10 | 1981 | Flue and Exhaust Gas Analyses [Part 10, Instruments and Apparatus] | American Society of Mechanical Engineers | |
Research and Special Programs Administration | 49 CFR 171.7(a)(3) | IMDG Code | 2006 | International Maritime Dangerous Goods Code | International Maritime Organization | |
Coast Guard | 46 CFR 175.600(b) Table | ABS Publication | 1995 | Rules for Building and Classing Steel Vessels for Service on Rivers and Intracoastal Waterways | American Bureau of Shipping | |
Mine Safety and Health Administration | 30 CFR 77.403-1(d)(2)(iii)(B) | SAE J-995a | 0 | Mechanical and Quality Requirements for Steel Nuts | Society of Automotive Engineers | |
Coast Guard | 46 CFR 177.405(b) | ABYC P-1 | 1993 | Safe Installation of Exhaust Systems for Propulsion and Auxiliary Engines | American Boat and Yacht Council | |
Federal Highway Administration | 23 CFR 625.4(d)(1)(x) | AASHTO LRFDLTS-1-I4, 2020 | 2020 | Transportation Materials | American Association of State Highway and Transportation Officials | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 173.115(k)(3) | UN Publication | 2003 | UN Recommendations on the Transport of Dangerous Goods, Manual of Tests and Criteria | United Nations | |
National Highway Traffic Safety Administration | 49 CFR 572.36(c) | Drawing No. C-1709 | 1993 | Neck transducer, Revision D | General Motors Corporation | |
Environmental Protection Agency | 40 CFR 136.3(a) Table ID (69) | APHA Method 6630 C | 2000 | Organochlorine Pesticides and PCBs by Liquid/Liquid Extraction and GC/ECD | American Public Health Association | |
Food and Drug Administration | 21 CFR 176.170(b)(2) | ASTM D 2503 | 1982 | Standard Method of Test for Molecular Weight of Hydrocarbons by Thermoelectric Measurement of Vapor Pressure | ASTM International | |
Housing and Urban Development Department | 24 CFR 200, Appendix A | FedSpec HH-I-558B | 1976 | Insulation Blocks, Boards, Blankets, Felts Sleeving (Pipe and Tub Coverings), and Pipe Fitting Covering, Thermal (Mineral Fiber, Insulation Type) | Federal Specifications Standards and Test Methods | |
National Highway Traffic Safety Administration | 21 CFR 118.8(a) | FDA Publication | 2008 | Environmental Sampling and Detection of Salmonella in Poultry Houses | Food and Drug Administration, U.S. Department of Health and Human Services | |
Environmental Protection Agency | 40 CFR 268.44(o), Table Footnote 4 | EPA Method 9012B | 2004 | Total and Amenable Cyanide (Automated Colorimetric, with Off-Line Distillation) | U.S. Environmental Protection Agency | |
Federal Motor Carrier Safety Administration | 49 CFR 393.86(a)(6) | FMVSS 223 | 1998 | Rear Impact Guards | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Labor Department | 41 CFR 50-204.75 | 49 CFR 391 | 0 | Qualifications of Drivers and Longer Combination Vehicle (LCV) Driver Instructors | Federal Motor Carrier Safety Administration, Department of Transportation | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (78) | EPA Method 610 (HPLC) | 1982 | Polynuclear Hydrocarbons by HPLC/UV-VIS | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 141.74(a)(1) Table (Heterotrophic bacteria) | APHA Method 9215 B | 0 | Pour Plate Method | American Public Health Association | |
Environmental Protection Agency | 40 CFR 61, Appendix B, Method 114, 3.5 | ASTM D 3648 | 1978 | Standard Practices for the Measurement of Radioactivity | ASTM International | |
Energy Department | 10 CFR 440 Appendix A | ASTM C 553 | 1977 | Blanket and Felt Mineral Fiber Insulation (Industrial Type) | ASTM International | |
Environmental Protection Agency | 40 CFR 52.741(e)(3)(ii)(A) | 35 I.A.C. 215, Subpart R | 1989 | Administrative Code | State of Illinois | |
Rural Utilities Service | 7 CFR 1755.860(m)(6) | ASTM D 4566 | 1990 | Standard Test Method for Electrical Performance Properties of Insulations and Jackets for Telecommunications Wire and Cable | ASTM International | |
Food and Drug Administration | 21 CFR 177.1020(c)(2) | FDA Publication | 0 | Determination of Residual Acrylonitrile and Styrene Monomers Gas Chromatographic Internal Standard Method | Food and Drug Administration, U.S. Department of Health and Human Services | |
Food and Drug Administration | 21 CFR 177.2450(b)(3) | FDA Publication | 0 | Amide-Imide Polymer Content--Analysis of Monomer Content | Food and Drug Administration, U.S. Department of Health and Human Services | |
Federal Trade Commission | 16 CFR 460.5(e)(1)(ii) | ASTM C 518 | 2004 | Standard Test Method for Steady-State Heat Flux Measurements and Thermal Transmission Properties by Means of the Heat Flow Meter Apparatus | ASTM International | |
Environmental Protection Agency | 40 CFR 141.23(k)(1) Table (19) Nitrite | ASTM D 6508 | 2000 | Standard Test Method for Determination of Dissolved Inorganic Anions in Aqueous Matrices Using Capillary Ion Electrophoresis and Chromate Electrolyte | ASTM International | |
Environmental Protection Agency | 40 CFR 60.17(g)(163) | ASTM D 4629 | 2002 | Standard Test Method for Trace Nitrogen in Liquid Petroleum Hydrocarbons by Syringe/Inlet Oxidative Combustion and Chemiluminescence Detection | ASTM International | |
National Highway Traffic Safety Administration | 49 CFR 572.100(b)(1) | Drawing No. 92041-011 | 1992 | Head Ballast Weight | Reprographic Technologies | |
Coast Guard | 46 CFR 116.423(a)(1) | UL 1056 | 1989 | Fire Test of Upholstered Furniture | Underwriters Laboratories, Inc. | |
Coast Guard | 46 CFR 56.60-1(a)(2) | ASME B31.1 | 2001 | Power Piping ASME Code for Pressure Piping | American Society of Mechanical Engineers | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (56) | APHA Method 2540 F | 1997 | Solids, Settleable Solids | American Public Health Association | |
National Highway Traffic Safety Administration | 49 CFR 572.81(a) | Drawing No. LP 1049/0 | 0 | 9-month old Dummy Parts List Index | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Environmental Protection Agency | 40 CFR 270.6(b)(1) | EPA-450-2-81-005 | 1981 | Air Pollution Training Institute Course 415: Control of Gaseous Emissions | U.S. Environmental Protection Agency | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.901(d)(17) | API RP 14J | 2007 | Recommended Practice for Design and Hazards Analysis for Offshore Production Facilities | American Petroleum Institute | |
Coast Guard | 46 CFR 125.180(b) | NFPA 10 | 1994 | Portable Fire Extinguishers | National Fire Protection Association | |
Coast Guard | 46 CFR 160.151-29 | IMO Resolution MSC.293(87) | 2010 | Annex 7 to MSC 87/26, Report of the Maritime Safety Committee on its Eighty-Seventh Session, Resolution MSC.293(87), Adoption of Amendments to the International Life-Saving Appliance (LSA) Code | International Maritime Organization | |
Environmental Protection Agency | 40 CFR 1066.301(b) | SAE J-2263 | 2008 | Road Load Measurement Using Onboard Anemometry and Coastdown Techniques | Society of Automotive Engineers | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IA | APHA Standard Methods, 20th Edition | 1998 | Standard Methods for the Examination of Water and Wastewater. 20th Edition | American Public Health Association | |
Environmental Protection Agency | 40 CFR 763 Appendix A (II)(J)(4) | DOI/BOM Information Circular 8751 | 1977 | Selected Silicate Minerals and Their Asbestiform Varieties, Campbell, W.J., R.L. Blake, L.L. Brown, E.E. Cather, and J.J. Sjoberg | Bureau of Mines, U.S. Department of Interior | |
Environmental Protection Agency | 40 CFR 98.123(e)(2) | EPA-430-R-10-003 | 2010 | Protocol for Measuring Destruction or Removal Efficiency (DRE) of Fluorinated Greenhouse Gas Abatement Equipment in Electronics Manufacturing, Version 1 | U.S. Environmental Protection Agency | |
Pipeline and Hazardous Materials Safety Administration | 40 CFR 136.3(a) Table IB (30) | AOAC Method 993.14 | 1998 | Iron-Total, mg/L | AOAC International | |
Occupational Safety and Health Administration | 29 CFR 1910.261(c)(15)(iv) | ANSI B20.1 | 1957 | Safety Code for Conveyors, Cableways, and Related Equipment | American National Standards Institute | |
Environmental Protection Agency | 40 CFR 761.19(a)(2) | ASTM D 129 | 1978 | Standard Test Method for Sulfur in Petroleum Products (General Bomb Method) | ASTM International |