This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation Sort ascending | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Occupational Safety and Health Administration | 29 CFR 1926.602(a)(2)(i) | SAE J-333a | 1970 | Operation Protection for Wheel-Type Agricultural and Industry Tractors | Society of Automotive Engineers | |
National Highway Traffic Safety Administration | 40 CFR 136.3(a) Table IB (4) | EPA Method 350.1 | 1993 | Ammonia Nitrogen - Colorimetric, Auto Phenate, Revision 2.0 | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (65) | APHA Method 4110 B | 2000 | Anions by Ion Chromatography with Chemical Suppression of Eluent | American Public Health Association | |
Environmental Protection Agency | 40 CFR 141.23(k)(2) Table Note 1 | EPA Method 200.7 | 1994 | ICP - metals, Revision 4.4 | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 60.41b Distillate oil | ASTM D 396 | 1992 | Standard Specification for Fuel Oils | ASTM International | |
Environmental Protection Agency | 40 CFR 60.105a(g)(2) | ANSI/ASME PTC 19.10-1981 | 1981 | Flue and Exhaust Gas Analyses | American Society of Mechanical Engineers | |
Food and Drug Administration | 21 CFR 177.2600(c)(4)(i) | PRC Publication | 1991 | Determination of Residual [alpha],[beta]-Olefinic and Trans Olefinic Unsaturation Levels in HNBR | Polysar Rubber Corp. | |
Housing and Urban Development Department | 24 CFR 200, Appendix A | HUD Handbook 4940.2 | 1973 | Minimum Design Standards for Community Water Supply Systems | U.S. Department of Housing and Urban Development | |
Environmental Protection Agency | 40 CFR 60.704(d)(4) | ASTM D 1946 | 1990 | Standard Method for Analysis of Reformed Gas by Gas Chromatography | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1910.6(f)(8) | API 2000 | 1968 | Venting Atmospheric and Low Pressure Storage Tanks | American Petroleum Institute | |
Environmental Protection Agency | 40 CFR 61.107(d)(1)(ii) | ANSI/HPS N13.1 | 1999 | Sampling and Monitoring Releases of Airborne Radioactive Substances From the Stacks and Ducts of Nuclear Facilities | American National Standards Institute | |
Coast Guard | 46 CFR 63.25-9(d) | IMO Resolution MEPC.76(40) | 1997 | Standard Specification for Shipboard Incinerators | International Maritime Organization | |
Consumer Product Safety Commission | 16 CFR 1203.17(a)(2) | SAE J-211 | 1988 | Instrumentation for Impact Tests | Society of Automotive Engineers | |
Occupational Safety and Health Administration | 29 CFR 1910 Subpart L Appendix D Table | NIOSH Publication | 1976 | Development of Criteria for Firefighters Gloves; Vol. II, Part II; Test Methods | National Institute for Occupational Safety and Health | |
Environmental Protection Agency | 40 CFR 92.119(a)(3)(i) | SAE Paper 770141 | 1977 | Optimization of a Flame Ionization Detector for Determination of Hydrocarbon in Diluted Automotive Exhausts | Society of Automotive Engineers | |
Coast Guard | 46 CFR 54.01-35(a) | ASME B&PV Code | 1989 | Boiler and Pressure Vessel Code, Section VIII, Division 1, Rules for Construction of Pressure Vessels (with 1999 and 2000 addenda) | American Society of Mechanical Engineers | |
Occupational Safety and Health Administration | 29 CFR 1910.6(e)(19) | ANSI B30.2.0 | 1967 | Safety Code for Overhead and Gantry Cranes | American National Standards Institute | |
Nuclear Regulatory Commission | 10 CFR 50.48(c)(4)(i) | NFPA 805 | 2001 | Performance-Based Standard for Fire Protection for Light Water Reactor Electric Generating Plants | National Fire Protection Association | |
Coast Guard | 46 CFR 160.156-21(a)(1) | IMO MSC.1/Circular 1205 | 2006 | Guidelines for Developing Operation and Maintenance Manuals for Lifeboat Systems | International Maritime Organization | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (7) | EPA Method 200.8 | 1994 | Metals by ICP-MS, Revision 5.4 | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 136.3(b)(15)(iii) | ASTM Annual Book of Standards | 1999 | Annual Book of ASTM Standards, Water, and Environmental Technology, Section 11, Volumes 11.01 and 11.02 | ASTM International | |
Environmental Protection Agency | 40 CFR 799.5087(h)(1)(xi) | ISO 14593:1999(E) | 1999 | Water Quality—Evaluation of Ultimate Aerobic Biodegradability of Organic Compounds in Aqueous Medium—Method by Analysis of Inorganic Carbon in Sealed Vessels (CO2 Headspace Test). First Edition | International Organization for Standardization | |
Environmental Protection Agency | 40 CFR 98.256(o)(2)(i) | EPA AP 42, Section 5.2 | 2008 | AP 42, Section 5.2, Transportation and Marketing of Petroleum Liquids | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 444.12(b)(1) Table (1) | ASTM D 2972C | 1993 | Arsenic by Graphite Furnace Atomic Absorption | ASTM International | |
National Highway Traffic Safety Administration | 49 CFR 572.137(i) | Drawing No. 880105-500 | 2002 | Pelvis bone | Reprographic Technologies | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IG (Fenthion) | EPA Method 1657 | 1993 | The Determination of Organo-Phosphorus Pesticides in Municipal and Industrial Wastewater | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 268.40(b) | EPA SW-846 | 2015 | Test Methods for Evaluating Solid Waste, Physical/Chemical Methods | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 68.115(b)(2)(i) | NFPA 30 | 1996 | Flammable and Combustible Liquids Code | National Fire Protection Association | |
Environmental Protection Agency | 40 CFR 52, Subpart HH | NYSIP | 1979 | State Implementation Plan with Regulatory and Nonregulatory Revisions | State of New York (NY) | |
Coast Guard | 40 CFR 136.3(a) Table IG (Alachlor) | EPA Method 645 | 1993 | Certain Amine Pesticides and Lethane by Liquid/Liquid Extraction and GC/NPD | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 63.14(g)(13) | ASTM D 1835 | 2005 | Standard Specification for Liquefied Petroleum (LP) Gases | ASTM International | |
Surface Mining Reclamation and Enforcement Office | 30 CFR 780.21(a) | APHA Standard Methods | 1980 | Standard Methods for the Examination of Water and Wastewater | American Public Health Association | |
Coast Guard | 46 CFR 160.005-4(c)(1) | Drawing No. 160.005-1 (Sheet 5) | 2012 | Pad Detail (Child) | U.S. Coast Guard | |
Coast Guard | 21 CFR 177.1500(d)(5)(i) | ISO 307 | 1984 | Plastics--Polyamides--Determination of Viscosity Number | International Organization for Standardization | |
Architectural and Transportation Barriers Compliance Board | 36 CFR 1191, App B, 105.2.4 | ICC/IBC | 2000 | International Building Code | International Code Council | |
Coast Guard | 24 CFR 3280.803(k)(1) | NFPA 70 | 2005 | National Electrical Code | National Fire Protection Association | |
Research and Special Programs Administration | 49 CFR 192.7(c)(2) C9 | ASTM D 638 | 2003 | Standard Test Method for Tensile Properties of Plastics | ASTM International | |
Rural Utilities Service | 7 CFR 1755.522(a)(4) | ASTM B 33 | 1991 | Standard Specification for Tinned Soft or Annealed Copper Wire for Electrical Purposes | ASTM International | |
Rural Utilities Service | 7 CFR 1755.910(e)(3)(x) | ASTM D 2565 | 1992 | Standard Practice for Operating Xenon Arc-Type Light-Exposure Apparatus With or Without Water for Exposure of Plastics | ASTM International | |
Federal Motor Carrier Safety Administration | 49 CFR 385.4(b)(1) | CVSA Publication | 2013 | North American Standard Out-of-Service Criteria and Level VI Inspection Procedures and Out-of-Service Criteria (shaded items) for Commercial Highway Vehicles Transporting Transuranics and Highway Route Controlled Quantities of Radioactive Materials | Commercial Vehicle Safety Alliance | |
Food and Drug Administration | 21 CFR 173.300(a)(2) | APHA Method 4500-ClO2 E | 1998 | Chlorine Dioxide, Amperometric Method II | American Public Health Association | |
Food and Drug Administration | 21 CFR 184.1721(b) | Food Chemicals Codex | 1981 | Sodium Acetate | National Academy Press | |
Federal Railroad Administration | 49 CFR 229 Appendix F Verification Guidance (a)(6)(iv) | IEC 61508-4 Corr.1 | 1999 | Corrigendum 1- Part 4: Definitions and abbreviations | International Electrotechnical Commission | |
Environmental Protection Agency | 40 CFR 136.3(a) Table ID (14) | APHA Method 6630 B | 2000 | Organochlorine Pesticides by Liquid/Liquid Extraction and GC/ECD | American Public Health Association | |
Environmental Protection Agency | 40 CFR 141.852(c)(1)(i)(B) | APHA Method 9221 | 1998 | Multiple-Tube Fermentation Technique for Members of the Coliform Group, D.1, D.2, Presence-Absence (P-A) Coliform Test | American Public Health Association | |
Environmental Protection Agency | 40 CFR 63, Subpart DDDDD, Table 6, 1(e) | ASTM D 4057 | 2006 | Standard Practice for Manual Sampling of Petroleum and Petroleum Products, including Annex A1 | ASTM International | |
Housing and Urban Development Department | 24 CFR 3285.402(b)(2) | ASTM D 3953 | 1991 | Standard Specification for Strapping, Flat Steel and Seals | ASTM International | |
Minerals Management Service | 30 CFR 250.1629(b)(1)(i) | ANSI/ASME B&PV Code | 2005 | Boiler and Pressure Vessel Code, Section I | American Society of Mechanical Engineers | |
Coast Guard | 21 CFR 139.150(a)(4) | AOAC Official Methods | 1980 | Official Methods of Analysis | AOAC International | |
Occupational Safety and Health Administration | 29 CFR 1910.6(e)(3) | ANSI A11.1 | 1970 | Practice for Industrial Lighting | American National Standards Institute |