DISCLAIMER: Data and information released from the Standards Incorporated by Reference databases at NIST are provided on an "AS IS" basis, without representation or warranty of any kind, including without limitation the warranties of merchantability, fitness for a particular purpose and non-infringement. Data and/or information in this database may contain errors or may be incomplete. Please email standardsinfo@nist.gov if you identified missing information or incorrect information. This database is provided by NIST as a public service. Inclusion of records in this database does not represent endorsement or recommendation of standards listed by NIST.
NOTE: This database does not included records related to the Incorporation by Reference for the following: Department of Transportation, Federal Aviation Administration – Airworthiness Directives, State Air Plan Approvals, and Standard Instrumentation Approach Procedures; and the Environmental Protection Agency - State Approval of Air Quality Plans.
Incorporated by (Agency) | FR Citation Sort descending | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Coast Guard | 46 CFR 56.01-2(b)(3) | ANSI/ASME B1.20.3 | 1982 | Dry Seal Pipe Threads (Inch) | American National Standards Institute | |
Architectural and Transportation Barriers Compliance Board | 36 CFR 1191, App B, 105.2.5 | NFPA 72 | 1999 | National Fire Alarm Code | National Fire Protection Association | |
Research and Special Programs Administration | 49 CFR 171.7(a)(3) | APA 87-1 | 2001 | Standard for Construction and Approval for Transportation of Fireworks, Novelties, and Theatrical Pyrotechnics | American Pyrotechnics Association | |
Coast Guard | 46 CFR 182.130 | ABYC H-25 | 1994 | Portable Fuel Systems for Flammable Liquids | American Boat and Yacht Council | |
Environmental Protection Agency | 40 CFR 60.17(g)(182) | ASTM D 6420 | 2004 | Standard Test Method for Determination of Gaseous Organic Compounds by Direct Interface Gas Chromatography-Mass Spectrometry | ASTM International | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.415(e) | API RP 65 | 2002 | Recommended Practice for Cementing Shallow Water Flow Zones in Deep Water Wells | American Petroleum Institute | |
Veterans Affairs Department | 38 CFR 17.74(g)(5) | NFPA 72 | 2010 | National Fire Alarm and Signaling Code | National Fire Protection Association | |
Occupational Safety and Health Administration | 29 CFR 1926.97 Table E-2 Note | ASTM D 1050 | 2011 | Standard Specification for Rubber Insulating Line Hose | ASTM International | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (46) | APHA Method 6200 B | 1997 | Volatile Organic Compounds by Purge and Trap GC/MS | American Public Health Association | |
Environmental Protection Agency | 40 CFR 141.25(a) Table | APHA Method 7500-Sr B | 2001 | Total Radioactive Strontium and Strontium-90, Precipitation Method | American Public Health Association | |
Environmental Protection Agency | 40 CFR 60.4415(a)(1)(i) | ASTM D 1552 | 1983 | Standard Test Method for Sulfur in Petroleum Products (High-Temperature Method) | ASTM International | |
Coast Guard | 45 CFR 162.920(c)(3)(iii) | CAQH Publication | 2011 | Phase II CORE 259: Eligibility and Benefits 270/271 AAA Error Code Reporting Rule, version 2.1.0 | Council for Affordable Quality Healthcare's (CAQH) Committee on Operating Rules for Information Exchange (CORE) | |
Minerals Management Service | 30 CFR 250.1629(b)(4)(i) | API RP 505 | 2002 | Recommended Practice for Classification of Locations for Electrical Installations at Petroleum Facilities Classified as Class 1, Zone 0, Zone 1, and Zone 2 | American Petroleum Institute | |
Nuclear Regulatory Commission | 10 CFR 50.55a(b)(6)(iii) | NRC Regulatory Guide 1.192 | 2003 | Operation and Maintenance Code Case Acceptability, ASME OM Code | U.S. Nuclear Regulatory Commission | |
Environmental Protection Agency | 40 CFR 60, Appendix A-7, Method 24, Section 11.2.2.1 | ASTM D 2369 | 1995 | Standard Test Method of Volatile Content for Coatings | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1910 Subpart S Appendix A | NFPA 70 | 2002 | National Electrical Code | National Fire Protection Association | |
Coast Guard | 46 CFR 164.012-1(a)(1) | ASTM E 84 | 1998 | Standard Test Method for Surface Burning Characteristics of Building Materials | ASTM International | |
Environmental Protection Agency | 40 CFR 52.741(u)(1)(i) | 35 I.A.C. 215, Subpart X | 1989 | Administrative Code | State of Illinois | |
Rural Utilities Service | 7 CFR 1755.860(i)(4)(iv) | ASTM B 694 | 1986 | Standard Specification for Copper, Copper Alloy, and Copper-Clad Stainless Steel Sheet and Strip for Electrical Cable Shielding | ASTM International | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 179.300-9(a) | AAR Specification M-1002 | 2000 | AAR Manual of Standards and Recommended Practices, Section C-Part III, Specification for Tank Cars | Association of American Railroads | |
Federal Aviation Administration | 14 CFR 152, Appendix B(a) | 150/5345-42A | 1975 | Airport Light Bases, Transformer Housings, and Junction Boxes, FAA Specification L-857 | Federal Aviation Administration, U.S. Department of Transportation | |
Coast Guard | 46 CFR 39.2001(k) | ASTM F 1122 | 1992 | Steel Pipe Flanges and Pipe Fittings | ASTM International | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (41) | EPA Method 1664 | 2010 | n-Hexane Extractable Material (HEM; Oil and Grease) and Silica Gel Treated n-Hexane Extractable Material (SGT–HEM; Non-polar Material) by Extraction and Gravimetry, Revision B | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 141.23(k)(1) Table (13) Fluoride | APHA Method 4500-F C | 1998 | Fluoride by Ion-Selective Electrode Method | American Public Health Association | |
Food and Drug Administration | 21 CFR 165.110(b)(4)(iii)(E)(2)(i) | EPA-600-4-79-020 | 1983 | Method 208.2--Atomic Absorption: furnace technique | U.S. Environmental Protection Agency | |
National Highway Traffic Safety Administration | 40 CFR 136.3(a) Table IB (7) | ASTM D 4382 | 2002 | Barium by Graphite Furnace Atomic Absorption | ASTM International | |
Coast Guard | 46 CFR 56.01-2(k)(14) | MSS SP-73 | 1996 | Brazing Joints for Copper and Copper Pressure Fittings | Manufacturers Standardization Society of the Valve and Fittings Industry | |
Coast Guard | 40 CFR 60.485(e)(1) | ASTM D 2879 | 1997 | Standard Test Method for Vapor Pressure--Temperature Relationship and Initial Decomposition Temperature of Liquids by Isoteniscope | ASTM International | |
Environmental Protection Agency | 40 CFR 260.11(d)(1) | NFPA 30 | 1977 | Flammable and Combustible Liquids Code | National Fire Protection Association | |
Federal Aviation Administration | 14 CFR 36.6(c)(1)(viii) | IEC 61260 | 1995 | Electroacoustics-Octave-Band and Fractional-Octave-Band Filters, edition 1.0 | International Electrotechnical Commission | |
Coast Guard | 46 CFR 160.135-15(e)(1)(vi) | ASTM A 653/A 653M | 2008 | Standard Specification for Steel Sheet, Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip Process | ASTM International | |
Environmental Protection Agency | 40 CFR 1043.20 Emission control area (ECA) | IMO Publication | 2008 | International Convention on the Prevention of Pollution from Ships, MARPOL Annex VI | International Maritime Organization | |
Environmental Protection Agency | 40 CFR 136.3(b)(7)(iv)(O) | EPA Method 632 | 1993 | Carbamate and Urea Pesticides by Liquid/Liquid Extraction and HPLC/UV-VIS | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 444.12(b)(1) Table (3) | EPA Method 218.3 | 1978 | Chromium (Atomic Absorption, Chelation-Extraction) | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 86.1(g)(11) | SAE J-1939-13 | 2004 | Off-Board Diagnostic Connector | Society of Automotive Engineers | |
Energy Department | 10 CFR 430 Subpart B, App. Q, 3.3.3 | ANSI C82.2 | 2002 | Fluorescent Lamp Ballasts--Methods of Measurement | American National Standards Institute | |
Energy Department | 10 CFR 430 Subpart B, App. T, 2a | ASME A112.19.6 | 1995 | Hydraulic Requirements for Water Closets and Urinals | American Society of Mechanical Engineers | |
National Archives and Records Administration | 74 FR 51014 | 36 CFR 1235.46(b)(1) | ANSI X3.39 | American National Standard: Recorded Magnetic Tape for Information Interchange (1600 CPI, PE) | American National Standards Institute | |
National Archives and Records Administration | 74 FR 51014 | 36 CFR 1235.46(b)(1) | ANSI X3.54 | American National Standard: Recorded Magnetic Tape for Information Interchange (6250 CPI, Group Coded Recording) | American National Standards Institute | |
National Archives and Records Administration | 74 FR 51014 | 36 CFR 1235.46(b)(2) | ANSI X3.180 | American National Standard: Magnetic Tape and Cartridge for Information Interchange—18-Track, Parallel, 1⁄2 inch (12.65 mm), 37871 cpi (1491 cpmm), Group-Coded—Requirements for Recording | American National Standards Institute | |
National Archives and Records Administration | 74 FR 51014 | 36 CFR 1235.46(b)(3) | ISO/IEC 15307 | Information technology—Data interchange on 12,7 mm 128-track magnetic tape cartridges—DLT 4 format | International Organization for Standardization | |
National Archives and Records Administration | 74 FR 51014 | 36 CFR 1235.46(b)(3) | ISO/IEC 15896 | Information technology—Data interchange on 12,7 mm 208-track magnetic tape cartridges—DLT 5 format | International Organization for Standardization | |
National Archives and Records Administration | 74 FR 51014 | 36 CFR 1235.46(b)(3) | ISO/IEC 16382 | Information technology—Data interchange on 12,7 mm 208-track magnetic tape cartridges—DLT 6 format | International Organization for Standardization | |
National Archives and Records Administration | 74 FR 51014 | 36 CFR 1235.46(c)(1) | ANSI/NISO/ISO 9660 | American National Standard for Volume and File Structure of CD-ROM for Information Exchange | American National Standards Institute | |
Consumer Product Safety Commission | 80 FR 25226 | 16 CFR 1120.4 (b)(1) | ASTM F 1816-97 | Standard Safety Specification for Drawstrings on Children's Upper Outerwear | ASTM International | |
Consumer Product Safety Commission | 80 FR 25226 | 16 CFR 1120.4 (c)(1) | UL 588 | Standard for Safety for Seasonal and Holiday Decorative Products | Underwriters Laboratories, Inc. | |
Consumer Product Safety Commission | 80 FR 25226 | 16 CFR 1120.4 (c)(2) | UL 859 | Standard for Safety for Household Electric Personal Grooming Appliances | Underwriters Laboratories, Inc. | |
Consumer Product Safety Commission | 80 FR 25226 | 16 CFR 1120.4 (c)(3) | UL 1727 | Standard for Safety for Commercial Electric Personal Grooming Appliances | Underwriters Laboratories, Inc. | |
Federal Communications Commission | 80 FR 33439 | 47 CFR 2.910(b)(1) | CISPR 16-1-4:2010-04 | Specification for radio disturbance and immunity measuring apparatus and methods—Part 1-4: Radio disturbance and immunity measuring apparatus—Antennas and test sites for radiated disturbance measurements | International Electrotechnical Commission | |
Federal Communications Commission | 80 FR 33439 | 47 CFR 2.910(c)(1) | ANSI C63.4-2014 | American National Standard for Methods of Measurement of Radio-Noise Emissions from Low-Voltage Electrical and Electronic Equipment in the Range of 9 kHz to 40 GHz | American National Standards Institute |