This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation Sort descending | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Coast Guard | 46 CFR 111.54-1(c)(1)(ii) | ANSI/IEEE C37.27 (IEEE Std 331) | 1987 | Application Guide for Low-Voltage AC Nonintegrally Fused Power Circuitbreakers (Using Separately Mounted Current-Limiting Fuses) | Institute of Electrical and Electronics Engineers | |
Coast Guard | 46 CFR 171.012(b)(2) | IMO Resolution MSC 267(85) | 2008 | Adoption of the International Code on Intact Stability, 2008 (2008 IS Code) | International Maritime Organization | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (34) | AOAC Method 974.27 | 1988 | Metals (Cd, Cr, Cu, Fe, Pb, Mg, Mn, As, and Zn) in Water - Atomic Absorption Spectrophotometric Method | AOAC International | |
Environmental Protection Agency | 40 CFR 136.3(b)(5)(iii)(E) | EPA Method 206.5 | 1978 | Arsenic, Sample Digestion Prior to Total Arsenic Analysis by Silver Diethyldithiocarbamate or Hydride Procedures | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 435.13 Note 8 | EPA Method 1646 | 2015 | Procedure for Mixing Base Fluids With Sediments | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 80.1468(b)(4) | ASTM D 6751 | 2009 | Standard Specification for Biodiesel Fuel Blend Stock (B100) for Middle Distillate Fuels | ASTM International | |
Environmental Protection Agency | 40 CFR 63.1251, Maximum true vapor pressure (1) | API MPMS | 1997 | Evaporative Loss from Floating Roof Tanks, Chapter 19.2 | American Petroleum Institute | |
Coast Guard | 46 CFR 160.133-5(b)(6) | ASTM F 1166 | 2007 | Standard Practice for Human Engineering Design for Marine Systems, Equipment, and Facilities | ASTM International | |
National Highway Traffic Safety Administration | 49 CFR 572.181 Table A | Drawing No. 175-6000 | 2009 | Pelvis Assembly | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Environmental Protection Agency | 40 CFR 147.1700(a)(3) | NCUIC regulations | 1987 | Water and Air Resources, N.C. GEN. STAT. §§ 143-211 through 143-215.10 (1987 and Cumm. Supp. 1989) | State of North Carolina | |
Environmental Protection Agency | 40 CFR 63.5935 Corrosion-resistant industry standard | UL 1316 | 2013 | Glass-Fiber-Reinforced Plastic Underground Storage Tanks for Petroleum Products, Alcohols, and Alcohol-Gasoline Mixtures | Underwriters Laboratories, Inc. | |
Veterans Affairs Department | 38 CFR 51.200(b)(2) | NFPA 99 | 2005 | Standard for Health Care Facilities | National Fire Protection Association | |
Housing and Urban Development Department | 24 CFR 200, Appendix A | PCI MNL 116 | 1985 | Manual for Quality Control for Plants and Production for Precast Prestressed Concrete Products | Precast/Prestressed Concrete Institute | |
Mine Safety and Health Administration | 30 CFR 71.602(a) | ANSI A40.8 | 1955 | National Plumbing Code | American National Standards Institute | |
Coast Guard | 46 CFR 175.600(b) Table | IMO Resolution A.658(16) | 1989 | Use and Fitting of Retro-Reflective Materials on Life-Saving Appliances | International Maritime Organization | |
Research and Special Programs Administration | 18 CFR 38.2(a)(6) | NAESB Publication | 2007 | Manual Time Error Correction with minor corrections | North American Energy Standards Board Wholesale Electric Quadrant | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IH (7) | APHA Method 9230 B | 2007 | Fecal Streptococcus and Enterococcus Groups, Multiple-Tube Technique | American Public Health Association | |
Environmental Protection Agency | 40 CFR 98.7(g)(5) | ISO/TR 15349-3 | 1998 | Unalloyed steel—Determination of low carbon content. Part 3: Infrared absorption method after combustion in an electric resistance furnace (with preheating), First Edition | International Organization for Standardization | |
Health and Human Services Department | 45 CFR 162.1502(a) | ASC X12N 834 | 2000 | Benefit Enrollment and Maintenance, version 4010 | Washington Publishing Company | |
Environmental Protection Agency | 40 CFR 136.3(a) Table ID (52) | USGS O-1126-95 | 1995 | Methods of Analysis by the U.S. Geological Survey National Water Quality Laboratory - Determination of Pesticides in Water by C-18 SPE and Capillary-Column GC-MS with Select-Ion Monitoring | U.S. Geological Survey | |
Food and Drug Administration | 21 CFR 165.110(b)(4)(iii)(F)(8) | EPA Method 506 | 1990 | Determination of Phthalate and Adipate Esters in Drinking Water by Liquid-Liquid Extraction or Liquid-Solid Extraction and Gas Chromatography with Photoionization Detection | U.S. Environmental Protection Agency | |
Research and Special Programs Administration | 49 CFR 172.519(d)(2)(i) | ASTM G 26 | 1970 | Standard Recommended Practice for Light- and Water-Exposure Apparatus (Xenon-Arc Type) for Exposure of Non-metallic Materials | ASTM International | |
Coast Guard | 46 CFR 167.20-1(a) | ABS Publication | 1981 | Rules for Building and Classing Steel Vessels | American Bureau of Shipping | |
National Highway Traffic Safety Administration | 49 CFR 571.205(a) S6.4 | ANSI Z26.1 | 1977 | Safety Code for Safety Glazing Materials for Glazing Motor Vehicles Operating on Land Highways | American National Standards Institute | |
Alcohol, Tobacco, Firearms, and Explosives Bureau | 27 CFR 30.24(c) | ASTM E 100 | 1978 | Standard Specification for ASTM Hydrometers | ASTM International | |
Coast Guard | 46 CFR 110.10-1(c)(2) | ANSI/IEEE C37.27 (IEEE Std 331) | 1987 | Application Guide for Low-Voltage AC Nonintegrally Fused Power Circuitbreakers (Using Separately Mounted Current-Limiting Fuses) | American National Standards Institute | |
National Highway Traffic Safety Administration | 49 CFR 572.15(b) | Drawing No. SA 103C 051 | 1976 | Forearm Hand Assembly Left | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Environmental Protection Agency | 40 CFR 141.40(a)(3) Table 1 (bromomethane) | EPA Method 524.3 | 2009 | Measurement of Purgeable Organic Compounds in Water by Capillary Column Gas Chromatography/Mass Spectrometry | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 60 Subpart MMMM, Table 3, Mercury | ASTM D 6784 | 2002 | Standard Test Method for Elemental, Oxidized, Particle-Bound and Total Mercury in Flue Gas Generated from Coal-Fired Stationary Sources (Ontario Hydro Method) | ASTM International | |
Energy Department | 10 CFR 430.3(e)(6) | ASHRAE 41.6 | 2001 | Standard Method for Measurement of Moist Air Properties | American Society of Heating, Refrigerating and Air Conditioning Engineers | |
Nuclear Regulatory Commission | 10 CFR 50.55a(g)(6)(ii)(C)(1) | ASME B&PV Code | 2004 | Boiler and Pressure Vessel Code, Section XI | American Society of Mechanical Engineers | |
Occupational Safety and Health Administration | 29 CFR 1926.1433(b)(4) | ANSI B30.5, 5-1.3.1 | 2004 | Safety Code for Crawler, Locomotive and Truck Cranes, Boom Hoist Mechanism, paragraphs (a), (b)(1) and (b)(2) | American National Standards Institute | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (58) | EPA Method 610 (GC) | 1982 | Polynuclear Hydrocarbons by GC/FID | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 141.23(k)(1) Table (16) Mercury | ASTM D 3223 | 2002 | Standard Test Method for Total Mercury in Water | ASTM International | |
Environmental Protection Agency | 40 CFR 60, Appendix A-8, Method 29, Section 18.0, Table 29-3 | EPA Method 7080 | 1986 | Test Methods for Evaluating Solid Waste, Physical/Chemical Methods, SW-846 Third Edition | U.S. Environmental Protection Agency | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.901(a)(19) | ASTM C 595-08 | 2008 | Standard Specification for Blended Hydraulic Cements | ASTM International | |
Coast Guard | 46 CFR 160.052-1(a)(3) | Federal Standard 751A | 1977 | Stitches, Seams, and Stitchings | Federal Specifications Standards and Test Methods | |
Coast Guard | 46 CFR 56.01-2(e)(80) | ASTM F 1201 | 2010 | Standard Specification for Fluid Conditioner Fittings in Piping Applications Above Zero Degrees F | ASTM International | |
Energy Department | 10 CFR 430 Subpart B, App. I, 1.6 | IEC 62301 | 2005 | Household electrical appliances—Measurement of standby power | International Electrotechnical Commission | |
Rural Utilities Service | 7 CFR 1755.870(a)(6) | ASTM D 2287 | 1988 | Standard Specification for Nonrigid Vinyl Chloride Polymer and Copolymer Molding and Extrusion Compounds | ASTM International | |
Environmental Protection Agency | 40 CFR 136.3(b)(3)(ii)(A) | EPA Method 200.7 | 1994 | Determination of Metals and Trace Elements in Water and Wastes by Inductively Coupled Plasma-Atomic Emission Spectrometry. Revision 4.4 | U.S. Environmental Protection Agency | |
Food and Drug Administration | 21 CFR 522.2640(a) | FDA Publication | 2001 | Determination of Factor Content in Tylosin by High Performance Liquid Chromatography | Food and Drug Administration, U.S. Department of Health and Human Services | |
Occupational Safety and Health Administration | 29 CFR 1910.110(i)(3)(i) | NFPA 58 | 2011 | Standard for the Storage and Handling of Liquefied Petroleum Gases | National Fire Protection Association | |
National Highway Traffic Safety Administration | 49 CFR 572.101(a) | Drawing No. C-1797 | 1989 | Neck Blank | Reprographic Technologies | |
Coast Guard | 46 CFR 111.91-1 | ASME A17.1 | 2000 | Part 2 Electric Elevators | American Society of Mechanical Engineers | |
Coast Guard | 46 CFR 25.45-2(b)(3) | NFPA 302 | 1998 | Fire Protection Standard for Pleasure and Commercial Motor Craft | National Fire Protection Association | |
Environmental Protection Agency | 40 CFR 261, Appendix IX, Tables 1 and 2 | EPA Method 0031 | 1996 | Sampling Method for Volatile Organic Compounds (SMVOC) | U.S. Environmental Protection Agency | |
Federal Motor Carrier Safety Administration | 49 CFR 393.45(a) | FMVSS 106 | 1998 | Brake Hoses | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Coast Guard | 46 CFR 53.05-1(a) | ASME B&PV Code | 2004 | Boiler and Pressure Vessel Code, Section IV, Rules for Construction of Heating Boilers | American Society of Mechanical Engineers | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (46) | AOAC Method 973.45 | 2014 | Oxygen (dissolved) in water. Titrimetric methods | AOAC International |