This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation Sort descending | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Environmental Protection Agency | 40 CFR 141.23(k)(1) Table (12) Cyanide | APHA Method 4500-CN F | 1995 | Cyanide by Ion Selective Electrode | American Public Health Association | |
Environmental Protection Agency | 40 CFR 86.1(b)(15) | ASTM D 3237 | 2012 | Standard Test Method for Lead in Gasoline by Atomic Absorption Spectroscopy | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1910.111(b)(7)(vi) | ASTM A 126 | 1966 | Standard Specification for Gray Iron Castings for Valves, Flanges, and Pipe Fittings | ASTM International | |
Research and Special Programs Administration | 21 CFR 175.250(b)(2) | ASTM D 721 | 1956 | Tentative Method of Test for Oil Content of Petroleum Waxes | ASTM International | |
Environmental Protection Agency | 40 CFR 52.742(a)(4) | ASTM D 4017 | 1987 | Standard Test Method for Water in Paints and Paint Materials by the Karl Fischer Titration Method | ASTM International | |
Environmental Protection Agency | 40 CFR 98.7(e)(14) | ASTM D 2502 | 2004 | Standard Test Method for Estimation of Mean Relative Molecular Mass of Petroleum Oils From Viscosity Measurements | Society of Automotive Engineers | |
Environmental Protection Agency | 40 CFR 1037.520 | USEPA Publication | 2012 | Greenhouse Gas Emissions Model (GEM) simulation tool, Version 2.0.1 | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IH Footnote 8 | APHA Standard Methods, 18th Edition | 1992 | Standard Methods for the Examination of Water and Wastewater, 18th Edition | American Public Health Association | |
Environmental Protection Agency | 40 CFR 436.21(c) | NWS Technical Paper No. 40 | 1961 | Rainfall Frequency Altas of the U.S. | U.S. Department of Commerce, National Oceanic and Atmospheric Administration | |
Housing and Urban Development Department | 24 CFR 3280.304(b)(1) | ANSI Z97.1 | 1984 | Safety Performance Specifications and Methods of Test for Safety Glazing Materials Used in Buildings | American National Standards Institute | |
Research and Special Programs Administration | 49 CFR 173.128(e) | UN Publication | 2003 | UN Recommendations on the Transport of Dangerous Goods, Manual of Tests and Criteria | United Nations | |
Coast Guard | 21 CFR 172.785(b)(6) | FDA Publication | 2003 | Method to Determine Microbial Contamination | Food and Drug Administration, U.S. Department of Health and Human Services | |
National Highway Traffic Safety Administration | 49 CFR 571.202a S5.1.1 | SAE J-826 | 1995 | Devices for Use in Defining and Measuring Vehicle Seating Accommodations | Society of Automotive Engineers | |
Environmental Protection Agency | 40 CFR 264.1033(e)(2) | ASTM D 2382 | 1983 | Standard Test Method for Heat of Combustion of Hydrocarbon Fuels by Bomb Calorimeter (High-Precision Method) | ASTM International | |
Energy Department | 10 CFR 440 Appendix A | ANSI Z21.21 | 1987 | Automatic Valves for Gas Appliances | American National Standards Institute | |
Coast Guard | 46 CFR 110.10-1(n)(2) | MIL-HDBK-299(SH) | 1989 | Military Handbook Cable Comparison Handbook Data Pertaining to Electric Shipboard Cable Notice 1-1991 (Revision of MIL-HDBK-299(SH)) | Naval Sea Systems Command | |
National Highway Traffic Safety Administration | 49 CFR 572.21(d) | SAE J-211a | 1971 | Instrumentation for Impact Tests | Society of Automotive Engineers | |
Environmental Protection Agency | 40 CFR 147.2350 | VAUIC regulatons | 2014 | Commonwealth of Virginia-administered program (Reserved) | Commonwealth of Virginia | |
Environmental Protection Agency | 40 CFR 63.10005(i)(5)(ii) | ASTM D 4057 | 2011 | Standard Practice for Manual Sampling of Petroleum and Petroleum Products, including Annex A1 | ASTM International | |
Coast Guard | 46 CFR 154.1400(c)(4) | ASTM F 1014 | 1992 | Standard Specification for Flashlights on Vessels | ASTM International | |
Coast Guard | 40 CFR 1065.720 Table 1 | ASTM D 1837 | 2011 | Standard Test Method for Volatility of Liquefied Petroleum (LP) Gases | ASTM International | |
Drug Enforcement Administration | 21 CFR 1300.03 FIPS 186-2 | FIPS Publication 186-2 | 2000 | Digital Signature Standard (DSS) | National Institute of Standards and Technology, U.S. Department of Commerce | |
Coast Guard | 40 CFR 136.3(a) Table IB (30) | HCC Method 8008 | 1980 | 1, 10--Phenanthroline Method Using FerroVer Iron Reagent for Water | Hach Chemical Company | |
Energy Department | 10 CFR 431.76(e)(1) | ASHRAE 103 | 1993 | Method of Testing for Annual Fuel Utilization Efficiency of Residential Central Furnaces and Boilers | American Society of Heating, Refrigerating and Air Conditioning Engineers | |
Occupational Safety and Health Administration | 29 CFR 1926.1436(c)(1)(ii) | AWS D1.1/D1.1M | 2002 | Structural Welding Code—Steel, 18th ed. | American Welding Society | |
Housing and Urban Development Department | 24 CFR 200.949(a)(1)(v) | ISDSI 104 | 1986 | Water Penetration Performance Standard for Insulated Steel Door Systems | Insulated Steel Door Institute | |
Coast Guard | 46 CFR 30.10-59 | ASTM D 323 | 1994 | Standard Test Method for Vapor Pressure of Petroleum Products (Reid Method) | ASTM International | |
Environmental Protection Agency | 40 CFR 52.741(e)(3)(ii)(A) | 35 I.A.C. 215, Subpart V | 1989 | Administrative Code | State of Illinois | |
Environmental Protection Agency | 40 CFR 136.3(a) Table ID (69) | EPA Method 1656 | 1993 | The Determination of Organo-Halide Pesticides in Municipal and Industrial Wastewater | U.S. Environmental Protection Agency | |
Rural Utilities Service | 7 CFR 1755.870(g)(5)(iii) | ASTM D 4565 | 1990 | Standard Test Method for Physical and Environmental Performance Properties of Insulations and Jackets for Telecommunication Wire and Cable | ASTM International | |
Environmental Protection Agency | 40 CFR 136.3(b)(10)(i) | APHA Standard Methods, 14th Edition | 1975 | Standard Methods for the Examination of Water and Wastewater. 14th Edition | American Public Health Association | |
National Highway Traffic Safety Administration | 40 CFR 136.3(a) Table IB (7) | USGS I-3084-85 | 1989 | Barium by Flame Atomic Absorption | U.S. Geological Survey | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (77) | EPA Method 1625 B | 1990 | Semivolatile Organic Compounds by Isotope Dilution GC/MS | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 141.74(a)(1) Table (Total Coliform) | APHA Method 9222 C | 1997 | Delayed-Incubation Total Coliform Procedure | American Public Health Association | |
Environmental Protection Agency | 40 CFR 61, Appendix B, Method 114, 3.1.2 | DOE IDO-12096 | 1982 | RESL Analytical Chemistry Branch Procedures Manual | U.S. Department of Energy | |
Coast Guard | 46 CFR 160.171-3(b) | UL 1191 | 1977 | Standard for Components for Personal Flotation Devices | Underwriters Laboratories, Inc. | |
Food and Drug Administration | 21 CFR 102.23(c)(3) | AOAC Official Methods | 1980 | Official Methods of Analysis | AOAC International | |
Environmental Protection Agency | 40 CFR 260.11(c)(3)(xix) | EPA Method 1110 A | 2004 | Corrosivity Toward Steel (and in Basic Manual Update IIIB) | U.S. Environmental Protection Agency | |
Federal Motor Carrier Safety Administration | 49 CFR 393.71(h)(8) | SAE J-684c | 1970 | Trailer Couplings and Hitches--Automotive Type | Society of Automotive Engineers | |
Coast Guard | 46 CFR 56.10-5(c)(3) | ASME B31.1 | 2001 | Power Piping ASME Code for Pressure Piping | American Society of Mechanical Engineers | |
Coast Guard | 46 CFR 177.300(b)(2) | ABS Publication | 1983 | Rules for Building and Classing Steel Vessels Under 61 Meters (200 feet) in Length | American Bureau of Shipping | |
Environmental Protection Agency | 40 CFR 141.23(k)(1) Table (19) Nitrite | APHA Method 4500-NO3 E | 2000 | Nitrate Nitrogen by Selective Electrode | American Public Health Association | |
Environmental Protection Agency | 40 CFR 60.17(g)(137) | ASTM D 3588 | 2003 | Standard Practice for Calculating Heat Value, Compressibility Factor, and Relative Density (Specific Gravity) of Gaseous Fuels | ASTM International | |
Environmental Protection Agency | 40 CFR 1065.1010(b)(15) | ASTM D 1945 | 2010 | Standard Test Method for Analysis of Natural Gas by Gas Chromatography | ASTM International | |
Consumer Product Safety Commission | 16 CFR 1201.7(c)(2) | ANSI Z97.1 | 1972 | Performance Specifications and Methods of Test for Safety Glazing Material Used in Buildings | American National Standards Institute | |
Coast Guard | 46 CFR 160.151-21(e) | IMO LSA Code | 2010 | Life-Saving Appliances, including LSA Code | International Maritime Organization | |
Food and Drug Administration | 21 CFR 131.206(e)(2) | AOAC Official Methods | 1980 | Official Methods of Analysis | AOAC International | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (54) | ASTM D 5907 | 2003 | Standard Test Method for Filterable and Nonfilterable Matter in Water | ASTM International | |
Environmental Protection Agency | 40 CFR 58 | EPA-454-R-98-004 | 1998 | Quality Assurance Handbook for Air Pollution Measurement Systems, Volume II: Part 1—Ambient Air Quality Monitoring Program Quality System Development | U.S. Environmental Protection Agency | |
Occupational Safety and Health Administration | 29 CFR 1910.261(g)(13)(i) | 29 CFR 1910.23 | 2014 | Safety Requirements for Floor and Wall Openings, Railings, and Toe Boards | Occupational Safety and Health Administration, U.S. Department of Labor |