This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation Sort descending | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Environmental Protection Agency | 40 CFR 80.125(d)(2) | IIA Publication | 1989 | Codification of Standards for the Professional Practice of Internal Auditing | Institute of Internal Auditors | |
Occupational Safety and Health Administration | 29 CFR 1910 Subpart L Appendix B 1910.162 | ANSI/NFPA 69 | 2014 | Explosion Suppression Systems | National Fire Protection Association | |
National Highway Traffic Safety Administration | 49 CFR 572.31(a)(3) | Drawing No. 78051-60 | 1998 | Pelvic Structure-Molded ASM-Hybrid III | General Motors Corporation | |
Environmental Protection Agency | 40 CFR 147.1450(a)(2) | NVUIC regulations | 1987 | Nevada Revised Statutes [NRS], Volume 29, Chapters 534A.010 through 534A.090, Inclusive | State of Nevada | |
Environmental Protection Agency | 40 CFR 63, Subpart UUUU, Table 4, (1)(a)(iii)(2) | ASME PTC 19.10 | 1981 | Flue and Exhaust Gas Analyses [part 10, Instruments and Apparatus] | American Society of Mechanical Engineers | |
Environmental Protection Agency | 40 CFR 63.14(g)(8) | ASTM D 1193 | 1977 | Standard Specification for Reagent Water | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1910 Subpart L Appendix B 1910.158 | NFPA 24 | 2013 | Outside Protection | National Fire Protection Association | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (18) | ASTM D 5257 | 2003 | Standard Test Method for Dissolved Hexavalent Chromium in Water by Ion Chromatography | ASTM International | |
National Highway Traffic Safety Administration | 49 CFR 571.205(a) S5.1.1.3 | ANSI Z26.1 | 1977 | Safety Code for Safety Glazing Materials for Glazing Motor Vehicles Operating on Land Highways | American National Standards Institute | |
Environmental Protection Agency | 40 CFR 86.1806-05(h)(1)(iii) | ISO 9141-2 | 1994 | Road Vehicles--Diagnostic Systems | International Organization for Standardization | |
Coast Guard | 46 CFR 58.03-1(j)(2) | SAE J-429 | 1983 | Mechanical and Material Requirements for Externally Threaded Fasteners | Society of Automotive Engineers | |
National Highway Traffic Safety Administration | 49 CFR 571.104 S3 Plan view (a) | SAE J-903a | 1966 | Passenger Car Windshield Wiper Systems | Society of Automotive Engineers | |
Environmental Protection Agency | 40 CFR 136.3(a) Table ID (45) | USGS O-2060-01 | 2001 | Pesticides in Water by SPE and HPLC-MS. Official Name: Methods of Analysis by the U.S. Geological Survey National Water Quality Laboratory - Determination of Pesticides in Water by Graphitized Carbon-Based Solid-Phase Extraction and HPLC-MS | U.S. Geological Survey | |
National Highway Traffic Safety Administration | 49 CFR 572.101(a) | Drawing No. 78051-228/78051-229 | 1978 | Skin-Hybrid III | Reprographic Technologies | |
Agricultural Marketing Service | 7 CFR 201.58c | AOSA Handbook No. 26 | 1964 | Microbiological Assay of Fungicide--Treated Seeds | Association of Official Seed Analysis | |
Veterans Affairs Department | 38 CFR 17.81(a)(1)(v)(A) | NFPA 10 | 2010 | Portable Fire Extinguishers | National Fire Protection Association | |
Occupational Safety and Health Administration | 29 CFR 1926.152(i)(1)(iii)(A)(2) | API 12A | 1951 | Specification for Oil Storage Tanks with Riveted Shells, Seventh Edition | American Petroleum Institute | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (49) | APHA Method 6420 B | 2000 | Phenols by Liquid/Liquid Extraction and GC/ECD | American Public Health Association | |
Environmental Protection Agency | 40 CFR 141.25(a) Table | ASTM D 2459 | 1972 | Standard Test Method for Extracting Residue from Metallic Medical Components and Quantifying via Gravimetric Analysis | ASTM International | |
Environmental Protection Agency | 40 CFR 60.4415(a)(1)(ii) | ASTM D 1072 | 1994 | Standard Test Method for Total Sulfur in Fuel Gases | ASTM International | |
Environmental Protection Agency | 40 CFR 761.71(b)(2)(vi) | ASTM D 2158 | 1989 | Standard Test Method for Residues in Liquefied Petroleum (LP) Gases | ASTM International | |
Nuclear Regulatory Commission | 10 CFR 50.55a(f)(2) | NRC Regulatory Guide 1.147 | 2010 | Inservice Inspection Code Case Acceptability, ASME Section XI, Division 1, Revision 16 | U.S. Nuclear Regulatory Commission | |
Environmental Protection Agency | 40 CFR 60, Appendix A-8, Method 29, Section 17.0(2) | EPA Method 6020 | 1986 | Test Methods for Evaluating Solid Waste, Physical/Chemical Methods, SW-846 Third Edition | U.S. Environmental Protection Agency | |
Rural Utilities Service | 7 CFR 1755.704(b)(1)(ii) | ICEA S-89-648 | 1993 | Standard for Telecommunications Aerial Service Wire, Technical Requirements | Insulated Cable Engineers Association | |
Environmental Protection Agency | 40 CFR 141.131(a)(2) | APHA Method 5310 B | 2014 | Organic carbon TOC, High-Temperature Combustion Method | American Public Health Association | |
Housing and Urban Development Department | 24 CFR 3280.705(b)(1) | ASTM B 43 | 1991 | Standard Specification for Seamless Red Brass Pipe, Standard Sizes | ASTM International | |
Food and Drug Administration | 21 CFR 178.2650(b)(1)(ii) | FDA Publication | 1977 | Atomic Absorption Spectrometric Determination of Sub-Part-Per-Million Quantities of Tin in Extracts and Biological Materials with Graphite Furnace, Analytical Chemistry, Vol 49, p. 1090 | Food and Drug Administration, U.S. Department of Health and Human Services | |
Federal Trade Commission | 16 CFR 309.10(a) | ASTM D 1946 | 1990 | Standard Test Method for Analysis of Reformed Gas by Gas Chromatography | ASTM International | |
Coast Guard | 21 CFR 131.149(c) | AOAC Official Methods | 1980 | Official Methods of Analysis | AOAC International | |
Research and Special Programs Administration | 49 CFR 192.153(a) | ASME B&PV Code | 2005 | Boiler and Pressure Vessel Code, Section VIII, Division 1 | American Society of Mechanical Engineers | |
Consumer Product Safety Commission | 16 CFR 1203.53(a)(3) | CSA D113.2-M | 1989 | Cycling Helmets | Canadian Standards Association | |
Drug Enforcement Administration | 21 CFR 1311.205(b)(4)(i) | FIPS Publication 140-2 | 2002 | Federal Information Processing Standard Publication (FIPS PUB) 140-2, Change Notices (12-03-2002), Security Requirements for Cryptographic Modules, including Annexes A through D | National Institute of Standards and Technology, U.S. Department of Commerce | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 178.338-17(b) | ASTM B 580 | 2000 | Standard Specification for Anodized Oxide Coatings on Aluminum | ASTM International | |
Federal Aviation Administration | 14 CFR 152, Appendix B(a) | 150/5345-48 | 1976 | Specification for Runway and Taxiway Edge Lights | Federal Aviation Administration, U.S. Department of Transportation | |
Coast Guard | 46 CFR 52.01-120(c)(3) | ASME B&PV Code | 2001 | Boiler and Pressure Vessel Code, Section I, Rules for Construction of Power Boilers | American Society of Mechanical Engineers | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (42) | APHA Method 5310 D | 2000 | Organic carbon TOC, High-Temperature Combustion Method | American Public Health Association | |
Occupational Safety and Health Administration | 29 CFR 1910.156(e)(5)(i) | USDOC Publication | 1977 | Model Performance Criteria for Structural Firefighters' Helmets | U.S. Department of Commerce | |
Coast Guard | 36 CFR 1237.3(e)(1) | ISO 18902 | 2001 | Imaging Materials--Photographic Processed Films, Plates, and Papers--Filing Enclosures and Storage Containers | International Organization for Standardization | |
Coast Guard | 40 CFR 60.562–2(d) | ASTM D 86 | 1995 | Standard Test Method for Distillation of Petroleum Products at Atmospheric Pressure | ASTM International | |
Environmental Protection Agency | 40 CFR 260.11(b)(9) | ASTM E 260 | 1985 | Standard Practice for Packed Column Gas Chromatography | ASTM International | |
Federal Motor Carrier Safety Administration | 49 CFR 393.24(c) | FMVSS 108 | 1998 | Lamps, Reflective Devices, and Associated Equipment | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Coast Guard | 46 CFR 160.151-15(e) | IMO Resolution MSC.293(87) | 2010 | Annex 7 to MSC 87/26, Report of the Maritime Safety Committee on its Eighty-Seventh Session, Resolution MSC.293(87), Adoption of Amendments to the International Life-Saving Appliance (LSA) Code | International Maritime Organization | |
Environmental Protection Agency | 40 CFR 1043.41(h)(2) | IMO Publication | 2008 | NOX Technical Code | International Maritime Organization | |
Environmental Protection Agency | 40 CFR 136.3(b)(7)(iv)(Z) | EPA Method 1660 | 1993 | Pyrethrins and Pyrethroids by Liquid/Liquid Extraction and HPLC/UV-VIS | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 444.12(b)(1) Table (4) | EPA Method 220.2 | 1978 | Copper (Atomic Absorption, Furnace Technique) | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 86.1(g)(23) | SAE J-2284-3 | 2001 | High Speed CAN (HSC) for Vehicle Applications at 500 KBPS | Society of Automotive Engineers | |
Occupational Safety and Health Administration | 29 CFR 1910.134(i)(1)(i) | USPHS Publication | 1969 | U.S. Pharmacopeia | U.S. Public Health Service, U.S. Department of Health and Human Services | |
Coast Guard | 46 CFR 111.105-1 | IEC 60079-1 | 2001 | Electrical Apparatus for Explosive Gas Atmospheres—Part 1: Flameproof Enclosures “d” including corr.1, Fourth Edition | International Electrotechnical Commission | |
Energy Department | 10 CFR 430 Subpart B, App. P, 2 | ANSI Z21.56 | 1994 | Gas-Fired Pool Heaters | American National Standards Institute | |
Environmental Protection Agency | 40 CFR 147.2201(a)(3) | TXUIC regulations | 1981 | Rules Having Statewide General Application to Oil, Gas, and Geothermal Resource Operations, sections .051.02.02.000 to .051.02.02.080 (Railroad Commission of Texas, Oil and Gas Division, Revised 12-22-81) | State of Texas |