This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation Sort descending | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
National Archives and Records Administration | 36 CFR 1237.16(b) | ISO 18911 | 2000 | Imaging Materials--Processed Safety Photographic Film--Storage Practices | International Organization for Standardization | |
Coast Guard | 46 CFR 56.01-2(e)(20) | ASTM A 249/A 249M | 1996 | Standard Specification for Welded Austenitic Steel Boiler, Superheater, Heat-Exchanger, and Condenser Tubes | ASTM International | |
Food and Drug Administration | 21 CFR 165.110(b)(4)(iii)(E)(9)(i) | EPA-600-4-79-020 | 1983 | Method 245.1--Manual Cold Vapor Technique | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 141.23(k)(1) Table (16) Mercury | ASTM D 3223 | 1997 | Standard Test Method for Total Mercury in Water | ASTM International | |
Environmental Protection Agency | 40 CFR 60, Appendix A-8, Method 29, Section 18.0, Table 29-3 | EPA Method 7060 | 1986 | Test Methods for Evaluating Solid Waste, Physical/Chemical Methods, SW-846 Third Edition | U.S. Environmental Protection Agency | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.901(a)(18) | ASTM C 330-05 | 2005 | Standard Specification for Lightweight Aggregates for Structural Concrete | ASTM International | |
Mine Safety and Health Administration | 30 CFR 75.1101-7(a) | NFPA 13 | 1969 | Standard for the Installation of Sprinkler Systems | National Fire Protection Association | |
Energy Department | 10 CFR 434.401.2.1 | NEMA MG-1 | 1993 | Motors and Generators (RS-3) | National Electrical Manufacturers Association | |
Food and Drug Administration | 21 CFR 573.460(a)(2)(i) | AAFCO Publication | 2003 | Official Publication | Association of American Feed Control Officials, Inc. | |
Rural Utilities Service | 7 CFR 1755.405(e)(6) | IEEE 743 | 1984 | Standard Methods and Equipment for Measuring the Transmission Characteristics of Analog Voice Frequency Circuits | Institute of Electrical and Electronics Engineers | |
Coast Guard | 46 CFR 133.70(c)(2)(i) | IMO Resolution A.760(18) | 1993 | Symbols Related to Life-Saving Appliances and Arrangements | International Maritime Organization | |
Environmental Protection Agency | 40 CFR 260.11(c)(3)(x) | EPA Method 0031 | 1996 | Test Methods for Evaluating Solid Waste, Physical/Chemical Methods (and in Basic Manual Update III) | U.S. Environmental Protection Agency | |
Federal Motor Carrier Safety Administration | 49 CFR 393.41(c)(2) | FMVSS 121 | 1998 | Air Brake Systems | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Coast Guard | 46 CFR 53.01-10(e)(1) | ASME B&PV Code | 2004 | Boiler and Pressure Vessel Code, Section IV, Rules for Construction of Heating Boilers | American Society of Mechanical Engineers | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (46) | ASTM D 888A | 2009 | Standard Test Methods for Dissolved Oxygen in Water, Titrimetric Procedure–High Level | ASTM International | |
Food and Drug Administration | 21 CFR 165.110(b)(3) | APHA Standard Methods | 1980 | Standard Methods for the Examination of Water and Wastewater | American Public Health Association | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 393.7(b)(20) | WSTDA-T1 | 1998 | Recommended Standard Specification for Synthetic Web Tiedowns | Web Sling and Tiedown Association | |
Coast Guard | 46 CFR 160.048-1(a)(1) | MIL-B-2766 | 1967 | Batt, Fibrous Glass, Lifesaving Equipment | U.S. Department of Defense | |
Labor Department | 41 CFR 50-204.2(a)(1) | 29 CFR 1504 | 2014 | Safety and Health Regulations for Longshoring | Occupational Safety and Health Administration, U.S. Department of Labor | |
Energy Department | 10 CFR 431.86(c)(1)(iv) | HI BTS-2000 | 2001 | Method to Determine Efficiency of Commercial Space Heating Boilers | Hydronics Institute | |
Coast Guard | 46 CFR 160.151-7(a) | IMO LSA Code | 2010 | Life Saving Appliances, including LSA Code | International Maritime Organization | |
Environmental Protection Agency | 40 CFR 1060.515(a)(1) | ASTM D 471 | 1998 | Standard Test Method for Rubber Property--Effect of Liquids | ASTM International | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IG Footnote 3 | EPA Method 1656 | 1993 | The Determination of Organo-Halide Pesticides in Municipal and Industrial Wastewater | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 444.12(b)(1) Table (7) | EPA Method 245.1 | 1994 | Mercury by Cold Vapor Atomic Absorption | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 98.74(c)(6) | ASTM D 5291 | 2007 | Standard Test Methods for Instrumental Determination of Carbon, Hydrogen, and Nitrogen in Petroleum Products and Lubricants | ASTM International | |
Environmental Protection Agency | 40 CFR 63.3521(b)(1) | ASTM D 2697 | 1986 | Standard Test Method for Volume Nonvolatile Matter in Clear or Pigmented Coatings | ASTM International | |
Research and Special Programs Administration | 49 CFR 178.356-2(e) | AWS B3.0 | 1972 | Standard Qualification Procedure | American Welding Society | |
Housing and Urban Development Department | 24 CFR 200, Appendix A | SGCC Publication | 1990 | Certified Products Directory | Safety Glazing Certification Council | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IF (Isobutyraldehyde) | EPA Method 1667 | 2014 | Formaldehyde, Isobutyraldehyde, and Furfural by Derivatization Followed by High Performance Liquid Chromatography | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 147.1050(a)(6) | MDUIC regulations | 1989 | Code of Maryland Regulations, Title 26, Subtitle 13, Chapter 05, section .19, promulgated and effective as of August 1, 1989 | State of Maryland | |
Environmental Protection Agency | 40 CFR 63, Subpart JJJJJJ, Table 5, (1)(c) | ASTM D 2013/D 2013M | 2009 | Standard Practice for Preparing Coal Samples for Analysis | ASTM International | |
Food and Drug Administration | 21 CFR 178.3530(a) | ASTM D 86 | 1982 | Standard Test Method for Distillation of Petroleum Products at Atmospheric Pressure | ASTM International | |
Housing and Urban Development Department | 24 CFR 200, Appendix A | FedSpec HH-I-526C | 1968 | Insulation Board, Thermal (Mineral Fiber) | Federal Specifications Standards and Test Methods | |
Environmental Protection Agency | 40 CFR 264.1033(e)(2) | ASTM D 1946 | 1982 | Standard Method for Analysis of Reformed Gas by Gas Chromatography | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1915.5(d)(4)(ix) | NFPA 13 | 2002 | Standard for the Installation of Sprinkler Systems | National Fire Protection Association | |
Coast Guard | 46 CFR 121.240(h) | NFPA 302 | 1994 | Fire Protection Standard for Pleasure and Commercial Motor Craft | National Fire Protection Association | |
National Highway Traffic Safety Administration | 49 CFR 572.83 | Drawing No. LP 1049-1 through LP1049-16 | 1979 | 9-month old Dummy Components and Parts | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Coast Guard | 46 CFR 54.05-5(a) | ASTM E 23 | 1996 | Notched Bar Impact Testing of Metallic Materials | ASTM International | |
Coast Guard | 46 CFR 182.440(d) | ABYC H-24 | 1993 | Gasoline Fuel Systems | American Boat and Yacht Council | |
Food and Drug Administration | 21 CFR 184.1135(b) | Food Chemicals Codex | 1981 | Ammonium Bicarbonate | National Academy Press | |
Transportation Security Administration | 49 CFR 1546.209(g) | ASTM F 792 | 1993 | Standard Practice for Design and Use of Ionizing Radiation Equipment for the Detection of Items Prohibited in Controlled Access Areas | ASTM International | |
Federal Aviation Administration | 14 CFR 36 Appendix F36.105(b) | IEC 179 | 1973 | Precision Sound Level Meters | International Electrotechnical Commission | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (98) | EPA Method 1625 B | 1990 | Semivolatile Organic Compounds by Isotope Dilution GC/MS | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 141.131(a)(2) | EPA Method 415.3 | 2005 | Determination of Total Organic Carbon and Specific UV Absorbance at 254 nm in Source Water and Drinking Water, Revision 1.1 | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 62.15130(c)(2) | ASME QRO-1 | 1994 | Standard for the Qualification and Certification of Resource Recovery Facility Operators | American Society of Mechanical Engineers | |
Environmental Protection Agency | 40 CFR 52.742(d) | 35 I.A.C. 215, Subpart Q | 1989 | Administrative Code, Excluding sections 215.432 and 215.436 | State of Illinois | |
Environmental Protection Agency | 40 CFR 60.17(g)(87) | ASTM D 2234 | 1997 | Standard Practice for Collection of a Gross Sample of Coal | ASTM International | |
Coast Guard | 46 CFR 161.006-5(b)(3) | ASTM B 117 | 1997 | Standard Practice for Operating Salt Spray (Fog) Apparatus | ASTM International | |
Food and Drug Administration | 21 CFR 177.1330(e)(4) | ASTM F 34 | 1980 | Standard Test Method for Liquid Extraction of Flexible Barrier Materials | ASTM International | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (63) | AOAC Method 973.54 | 1990 | Sodium in Water - Atomic Absorption Spectrophotometric Method | AOAC International |