This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation Sort descending | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Environmental Protection Agency | 40 CFR 60.41b Natural gas (2) | ASTM D 1835 | 1987 | Standard Specification for Liquefied Petroleum (LP) Gases | ASTM International | |
Federal Aviation Administration | 14 CFR 25 Appendix N N25.3(a) | DOT/FAA/AR-05/8 | 2008 | Fuel Tank Flammability Assessment Method User's Manual | Federal Aviation Administration, U.S. Department of Transportation | |
Environmental Protection Agency | 40 CFR 60, Appendix A-7, Method 23, Section 12.5.3.1.1 | ASTM D 2986 | 1978 | Standard Method for Evaluation of Air, Assay Media by the Monodisperse DOP (Dioctyl Phthalate) Smoke Test | ASTM International | |
National Highway Traffic Safety Administration | 10 CFR 52 App. C, VI B 2 | AP 600 | 1999 | Tier 1, Tier 2, and Generic Technical Specifications | Westinghouse Electric Company | |
Rural Utilities Service | 7 CFR 1728.201(f)(2) | ANSI O5.2 | 2006 | Standard for Wood Products, Structural Glued Laminated Timber for Utility Structures | American National Standards Institute | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (16) | AOAC Method 973.51 | 1990 | Chloride in Water - Mercuric Nitrate Method | AOAC International | |
Rural Utilities Service | 7 CFR 1728.97(a)(16) | RUS Bulletin 50–60 (T–9) | 1971 | RUS Specification for Single Pole Steel Structures Complete with Arms | Rural Utilities Service, U.S. Department of Agriculture | |
Environmental Protection Agency | 40 CFR 79.61(d)(2)(iii) | HHS Publication | 1985 | Guide for the Care and Use of Laboratory Animals | U.S. Department of Health and Human Services | |
Coast Guard | 46 CFR 56.97-1(a) | ASME B31.1 | 2001 | Power Piping ASME Code for Pressure Piping | American Society of Mechanical Engineers | |
Environmental Protection Agency | 40 CFR 94.2(b) Round | ASTM E 29 | 2002 | Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications | ASTM International | |
Rural Utilities Service | 7 CFR 1755.508(n) | NFPA 70 | 1999 | National Electrical Code | National Fire Protection Association | |
Coast Guard | 46 CFR 160.156-7(b)(3)(iv)(B) | MIL-C-19663D | 1988 | Military Specification, Cloth, Woven Roving, For Plastic Laminate | U.S. Department of Defense | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (5) | EPA Method 200.8 | 1994 | Metals by ICP-MS, Revision 5.4 | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 136.3(b)(13)(i)(F) | AOAC Method 973.44 | 1998 | Biochemical Oxygen Demand (BOD) in Water - Incubation Method | AOAC International | |
Environmental Protection Agency | 40 CFR 799.5085(j) Table 3, C3 | ASTM E 729 | 1996 | Standard Guide for Conducting Acute Toxicity Tests on Test Materials with Fishes, Macroinvertebrates, and Amphibians | ASTM International | |
Environmental Protection Agency | 40 CFR 98.244(b)(4)(xii) | ASTM D 7633 | 2010 | Standard Test Method for Carbon Black—Carbon Content | ASTM International | |
National Highway Traffic Safety Administration | 49 CFR 572.134(b) | Part No. 880105-000 | 2013 | Parts List and Drawings, Part 572 Subpart O Hybrid III Fifth Percentile Small Adult Female Crash Test Dummy (HIII-5F, Alpha Version) | Reprographic Technologies | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IG (Dinoseb) | EPA Method 555 | 1992 | Chlorinated Acids by HPLC/UV-VIS | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 266, Appendix IX, 1.8(b) | EPA SW-846 | 1996 | Test Methods for Evaluating Solid Waste, Physical/Chemical Methods | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 63.1064(b)(2) | API MPMS | 2015 | Air Concentration Test Method for the Measurement of Rim Seal Loss Factors for Floating-Roof Tanks, Chapter 19, Section 3, Part B | American Petroleum Institute | |
Occupational Safety and Health Administration | 29 CFR 1910.67(c)(5)(ii) | AWS D8.4 | 1961 | Recommended Safe Practices for Automotive Welding Design | American Welding Society | |
Housing and Urban Development Department | 24 CFR 3285.312(b)(3)(ii) | SEI/ASCE 32 | 2001 | Design and Construction of Frost-Protected Shallow Foundations | Structual Engineering Institute/American Society of Civil Engineers | |
Food Safety and Inspection Service | 9 CFR 319.700(a) | AOAC Official Methods | 1990 | Official Methods of Analysis | AOAC International | |
National Highway Traffic Safety Administration | 49 CFR 572.15(a) | Drawing No. SA 103C 052 | 1976 | Forearm Hand Assembly Right | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Coast Guard | 33 CFR 154, Appendix A, 3.1 | ASTM F 722 | 1982 | Standard Specification for Welded Joints for Shipboard Piping Systems | ASTM International | |
Coast Guard | 46 CFR 56.01-2(e)(28) | ASTM A 335/A 335M | 1995 | Standard Specification for Seamless Ferritic Alloy Steel Pipe for High-Temperature Service | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1928.51(b)(2)(ii) | SAE J-4C | 1965 | Motor Vehicle Seat Belt Assembly | Society of Automotive Engineers | |
Environmental Protection Agency | 40 CFR 444.12(b)(1) Table (11) | HCC Method 8009 | 1979 | Zincon Method for Zinc, Hatch Handbook of Water Analysis | Hach Chemical Company | |
Research and Special Programs Administration | 49 CFR 179.220-10(a) | AAR Specification M-1002 | 2000 | AAR Manual of Standards and Recommended Practices, Section C-Part III, Specification for Tank Cars | Association of American Railroads | |
Coast Guard | 40 CFR 136.3(a) Table IF (Benzene) | EPA Method 524.2 | 1995 | Volatile Organic Compounds GC/MS Capillary Column | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 63.14(g)(90) | ASTM E 260 | 1991 | General Practice for Packed Column Gas Chromatography | ASTM International | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.198(h)(65) | API RP 500 | 2002 | Recommended Practice for Classification of Locations for Electrical Installations at Petroleum Facilities Classified as Class 1, Division 1 and Division 2 | American Petroleum Institute | |
Coast Guard | 46 CFR 160.002-3(d) | FedSpec L-P-375 | 1956 | Plastic Film, Flexible, Vinyl Chloride | Federal Specifications Standards and Test Methods | |
Federal Motor Carrier Safety Administration | 49 CFR 384.107(b) | CDLIS | 2011 | Commercial Driver's License Information System (CDLIS) State Procedures Manual,” Release 5.2.0 | American Association of Motor Vehicle Administrators, Inc. | |
Food and Drug Administration | 21 CFR 173.368(c) | Food Chemicals Codex | 1996 | Ozone | National Academy Press | |
Food and Drug Administration | 21 CFR 184.1583(b) | Food Chemicals Codex | 1981 | Pancreatin | National Academy Press | |
Federal Railroad Administration | 49 CFR 229 Appendix F Human Factors I (d)(1) | OET Bulletin 61 | 1987 | FCC Equipment Authorization Program for Radio Frequency Devices | Federal Communications Commission | |
Environmental Protection Agency | 40 CFR 136.3(a) Table ID (11) | EPA Method 608 | 1982 | Organochlorine Pesticides & PCBs by GC/ECD | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 141.852(a)(5) Table | APHA Method 9222 B | 1998 | Membrane Filtration Qualitative (LES Endo): Total Coliform | American Public Health Association | |
Environmental Protection Agency | 40 CFR 63, Subpart DDDDD, Table 6, 1(a) | ASTM D 4177 | 2010 | Standard Practice for Automatic Sampling of Petroleum and Petroleum Products, including Annexes A1 through A6 and Appendices X1 and X2 | ASTM International | |
National Highway Traffic Safety Administration | 49 CFR 562.7 | ANSI/ASAE 279.14 | 2008 | Lighting and Marking of Agricultural Equipment on Highways | American Society of Agricultural Engineers | |
Housing and Urban Development Department | 24 CFR 200.929(b)(2) | HUD MPS | 2013 | Minimum Property Standards One and Two Family Dwellings | U.S. Department of Housing and Urban Development | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (7) | EPA Method 625 | 1982 | Base/Neutrals and Acids by GC/MS | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 141.24(e)(1) Table (2,4-D (as acids, salts, and esters)) | ASTM D 5317 | 2003 | Standard Test Method for Determination of Chlorinated Organic Acid Compounds in Water by Gas Chromatography with an Electron Capture Detector | ASTM International | |
Environmental Protection Agency | 40 CFR 60.58b(e)(12)(i)(A) | ASME PTC 19.10 | 1981 | Flue and Exhaust Gas Analyses [part 10, Instruments and Apparatus] | American Society of Mechanical Engineers | |
Coast Guard | 46 CFR 28.345(a) | ABYC E-8 | 1985 | Alternating Current (AC) Electrical Systems on Boats | American Boat and Yacht Council | |
Federal Trade Commission | 16 CFR 306.0(b) | ASTM D 2699 | 1992 | Standard Test Method for Knock Characteristics of Motor Fuels by the Research Method | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1910 Subpart L Appendix B 1910.158 | NFPA 13E | 2010 | Fire Department Operations in Properties Protected by Sprinkler, Standpipe Systems | National Fire Protection Association | |
Rural Utilities Service | 7 CFR 1755.910(d)(5)(vi)(C) | ASTM A 525 | 1991 | Standard Specification for General Requirements for Steel Sheet, Zinc-Coated (Galvanized) by the Hot-Dip Process | ASTM International | |
Food and Drug Administration | 21 CFR 101.9(g)(2) | AOAC Official Methods | 1990 | Official Methods of Analysis | AOAC International |