This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation Sort descending | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Environmental Protection Agency | 40 CFR 80.1426(f)(7)(v)(B) | ASTM D 4444 | 2013 | Standard Test Method for Use and Calibration of Hand-Held Moisture Meters | ASTM International | |
Coast Guard | 21 CFR 131.149(c) | AOAC Official Methods | 1980 | Official Methods of Analysis | AOAC International | |
Coast Guard | 40 CFR 60.435(d)(1) | ASTM D 1475 | 1990 | Standard Test Method for Density of Paint, Varnish, Lacquer, and Related Products | ASTM International | |
Coast Guard | 46 CFR 160.133-7(a)(2) | IMO Revised recommendation on testing | 2010 | Life-Saving Appliances, including LSA Code, Revised recommendation on testing of live-saving appliances, pages 79-254 | International Maritime Organization | |
National Highway Traffic Safety Administration | 49 CFR 572.181(b) | Drawing No. 175-0000, Sheet 3 of 6 | 2009 | Exterior dimensions of ES-2re test dummy | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Environmental Protection Agency | 40 CFR 136.3(b)(5)(iii)(J) | EPA Method 255.2 | 1978 | Platinum (Atomic Absorption, Furnace Technique) | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 435.13 Note 10 | EPA-821-R-11-004 | 2011 | Analytic Methods for the Oil and Gas Extraction Point Source Category | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 63.5935 Low Flame Spread/Low Smoke Products | ASTM E 162 | 2015 | Standard Test Method for Surface Flammability of Materials Using a Radiant Heat Energy Source | ASTM International | |
Food and Drug Administration | 21 CFR 165.110(b)(4)(iii)(I)(3)(iii) | APHA Method 6251 B | 1995 | Standard Methods for the Examination of Water and Wastewater | American Public Health Association | |
Environmental Protection Agency | 40 CFR 63.626(d)(3)(v)(B) | AFPC Book of Methods | 1991 | Section XI, Methods of Analysis for Phosphoric Acid, Superphosphate, Triple Superphosphate, and Ammonium Phosphates, No. 3 Total Phosphorus—P2O5, Method B—Gravimetric Quimociac Method | Association of Florida Phosphate Chemists | |
Environmental Protection Agency | 40 CFR 147.1750(a)(2) | NDUIC regulations | 1987 | North Dakota Administrative Code, Chapter 43-02-05 (Underground Injection Control, as published in Statutes and Rules for the Conservation of Oil and Gas, North Dakota Industrial Commission | State of North Dakota | |
Energy Department | 10 CFR 434.402.1.1 | ASTM C 177 | 1993 | Standard Test Method for Steady-State Heat Flux Measurements and Thermal Transmission Properties by Means of the Guarded-Hot-Plate Apparatus (RS-5) | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1910.261(c)(16) | ANSI Z535.2 | 2011 | Environmental and Facility Safety Signs | American National Standards Institute | |
Environmental Protection Agency | 40 CFR 89, Subpart D, Appendix D, Table 4 | ASTM D 613 | 1995 | Standard Test Method for Cetane Number of Diesel Fuel Oil | ASTM International | |
Research and Special Programs Administration | 49 CFR 195.124 | ASME B&PV Code | 2005 | Boiler and Pressure Vessel Code, Section VIII, Division 1 | American Society of Mechanical Engineers | |
Coast Guard | 40 CFR 444.12(b)(1) Table (1) | APHA Method 3500-As C | 1995 | Arsenic by Silver Dithiocarbamate Method | American Public Health Association | |
Environmental Protection Agency | 40 CFR 63.14(l)(1) | EPA-453-R-01-005 | 2001 | National Emission Standards for Hazardous Air Pollutants (NESHAP) for Integrated Iron and Steel Plants—Background Information for Proposed Standards, Final Report | U.S. Environmental Protection Agency | |
National Oceanic and Atmospheric Administration | 50 CFR 226.205 | USGS Publication | 1974 | 1:500,000 Scale Hydrologic Unit Maps for the State of Oregon | U.S. Geological Survey | |
Coast Guard | 46 CFR 110.10-1(l)(4) | NFPA 496 | 2003 | Standard for Purged and Pressurized Enclosures for Electrical Equipment | National Fire Protection Association | |
National Highway Traffic Safety Administration | 49 CFR 572.16(a) | Drawing No. SA 103C 001 | 1976 | Operation and Maintenance Manual for 3-year-old Test Dummy | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Environmental Protection Agency | 40 CFR 136.3(a) Table ID (54) | ASTM D 3086 | 1990 | Test Method for Organochlorine Pesticides in Water | ASTM International | |
Research and Special Programs Administration | 49 CFR 173.316(a)(4) | ASTM B 580 | 2000 | Standard Specification for Anodized Oxide Coatings on Aluminum | ASTM International | |
Coast Guard | 46 CFR 175.600(b) Table | ABS Publication | 1978 | Rules for Building and Classing Reinforced Plastic Vessels | American Bureau of Shipping | |
Nuclear Regulatory Commission | 10 CFR 50.55a(g)(6)(ii)(E)(2) | ASME Code Case N-722 | 2005 | Additional Examinations for PWR Pressure Retaining Welds in Class 1 Components Fabricated with Alloy 66/82/182 Materials, Section XI, Division 1 | American Society of Mechanical Engineers | |
Occupational Safety and Health Administration | 29 CFR 1926.1433(b)(12) | ANSI B30.5, 5-1.9.1(f) | 2004 | Safety Code for Crawler, Locomotive and Truck Cranes, Booms | American National Standards Institute | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (59) | EPA Method 1625 B | 1990 | Semivolatile Organic Compounds by Isotope Dilution GC/MS | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 141.40(a)(3) Table 1 (vanadium) | ASTM D 5673 | 2010 | Test Method for Elements in Water by Inductively Coupled Plasma-Mass Spectrometry | ASTM International | |
Environmental Protection Agency | 40 CFR 60.5220(b)(5)(i) | ASME PTC 19.10 | 1981 | Flue and Exhaust Gas Analyses [Part 10, Instruments and Apparatus] | American Society of Mechanical Engineers | |
Environmental Protection Agency | 40 CFR 63.1503 | ACGIH Guidelines | 1998 | Industrial Ventilation: A Manual of Recommended Practice | American Conference of Governmental Industrial Hygienists | |
Occupational Safety and Health Administration | 29 CFR 1910.103(c)(1)(v)(B) | ANSI B31.5 | 1966 | Refrigeration Piping | American National Standards Institute | |
National Archives and Records Administration | 36 CFR 1234.12(d) | ASTM E 119 | 1998 | Standard Test Methods for Fire Tests of Building Construction and Materials | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1910.269(v)(5) Note (1) | ANSI C2 | 1987 | National Electrical Safety Code | American National Standards Institute | |
Environmental Protection Agency | 40 CFR 141.23(k)(1) Table (17) Nickel | APHA Method 3120 B | 1995 | Metals by Inductively Coupled Plasma | American Public Health Association | |
Environmental Protection Agency | 40 CFR 60, Appendix A-8, Method 29, Section 18.0, Table 29-3 | EPA Method 7210 | 1986 | Test Methods for Evaluating Solid Waste, Physical/Chemical Methods, SW-846 Third Edition | U.S. Environmental Protection Agency | |
Housing and Urban Development Department | 24 CFR 200, Appendix A | ACI 311.4R | 1988 | Guide for Concrete Inspection | American Concrete Institute | |
Minerals Management Service | 30 CFR 870.20 | ASTM D 1412 | 1993 | Standard Test Method for Equilibrium Moisture of Coal at 96 to 97 Percent Relative Humidity and 30 Degrees Celsius | ASTM International | |
Coast Guard | 46 CFR 111.60-1(a) | IEC 92-353 | 1995 | Electrical Installations in Ships—Part 353: Single and Multicore Non-Radial Field Power Cables with Extruded Solid Insulation for Rated Voltages 1kV and 3kV, Second Edition | International Electrotechnical Commission | |
Drug Enforcement Administration | 21 CFR 1311.55(b)(1) | FIPS Publication 140-2 | 2002 | Federal Information Processing Standard Publication (FIPS PUB) 140-2, Change Notices (12-03-2002), Security Requirements for Cryptographic Modules, including Annexes A through D | National Institute of Standards and Technology, U.S. Department of Commerce | |
Environmental Protection Agency | 40 CFR 147.1500(a)(1) | NHUIC regulations | 1978 | New Hampshire Revised Statutes Annotated section 149:8 III(a) | State of New Hampshire | |
Rural Utilities Service | 7 CFR 1755.870(m)(5)(iii) | ASTM D 4566 | 1990 | Standard Test Method for Electrical Performance Properties of Insulations and Jackets for Telecommunications Wire and Cable | ASTM International | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 178.356-1(e) | DOE CAPE–1662 | 1988 | Civilian Application Program Engineering Drawings, Revision 1 and Supplement 1 | U.S. Department of Energy | |
Environmental Protection Agency | 40 CFR 266.107(f) | EPA Method 0051 | 1996 | Midget Impinger HCl/Cl2 Emission Sampling Train | U.S. Environmental Protection Agency | |
Federal Motor Carrier Safety Administration | 49 CFR 393.53(a) | FMVSS 105 | 1998 | Hydraulic and Electric Brake Systems | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Coast Guard | 46 CFR 54.01-5(g) Table 54.01-5(b) | ASME B&PV Code | 1998 | Boiler and Pressure Vessel Code, Section VIII, Division 1, Rules for Construction of Pressure Vessels (with 1999 and 2000 addenda) | American Society of Mechanical Engineers | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (46) | ISI Method 1002-8 | 2009 | Dissolved Oxygen (DO) Measurement by Optical Probe | In-Situ Incorporated | |
Environmental Protection Agency | 40 CFR 98.344(a) | NIST Handbook 44 | 2009 | Specifications, Tolerances, and Other Technical Requirements For Weighing and Measuring Devices | National Institute of Standards and Technology, U.S. Department of Commerce | |
National Highway Traffic Safety Administration | 49 CFR 572.130(a)(1)(ii) | Drawing No. 880105-250 | 2000 | Neck Assembly | Reprographic Technologies | |
Coast Guard | 33 CFR 157.02(b)(3) | IMO Resolution A.586(14) | 1985 | Revised Guidelines and Specifications for Oil Discharge Monitoring and Control Systems for Oil Tankers | International Maritime Organization | |
Environmental Protection Agency | 40 CFR 90.114(c)(4) | SAE J-1930 | 1991 | Electrical/Electronic Systems Diagnostic Terms, Definitions, Abbreviations, and Acronyms | Society of Automotive Engineers | |
Energy Department | 10 CFR 434.401.2.1 Table 401.2.1 | NEMA MG-10 | 1994 | Energy Management Guide for Selection and Use of Polyphase Motors (RS-43) | National Electrical Manufacturers Association |