This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation Sort descending | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Agricultural Marketing Service | 7 CFR 37.2 | ISO/IEC Guide 65 | 1996 | General Requirements for Bodies Operating Product Certification Systems | International Organization for Standardization / International Electrotechnical Commission | |
Public Health Service | 42 CFR 52b.12(b) | NSF 49 | 1992 | Class II (Laminar Flow) Biohazard Cabinetry | National Sanitation Foundation | |
National Highway Traffic Safety Administration | 49 CFR 571.5(l)(16) | SAE J-602 | 1980 | Headlamp Aiming Device for Mechanically Aimable Sealed Beam Headlamp Units | Society of Automotive Engineers | |
Environmental Protection Agency | 40 CFR 136.3(a) Table ID (33) | EPA Method 608 | 1982 | Organochlorine Pesticides & PCBs by GC/ECD | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 143.4(b) Table (Maganese) | APHA Method 3113 B | 1992 | Metals by Graphite Furnace Atomic Absorption | American Public Health Association | |
Environmental Protection Agency | 40 CFR 60.17(g)(160) | ASTM D 4457 | 1991 | Standard Test Method for Determination of Dichloromethane and 1,1,1-Trichloroethane in Paints and Coatings by Direct Injection into a Gas Chromatograph | ASTM International | |
National Highway Traffic Safety Administration | 49 CFR 571.201 S5.3.1(c) | SAE J-839b | 1965 | Passenger Car Side Door Latch System | Society of Automotive Engineers | |
Research and Special Programs Administration | 49 CFR 171.7(a)(3) | TTMA RP No. 61 | 1998 | Performance of Manhole and/or Fill Opening Assemblies | Truck Trailer Manufacturers Association | |
Housing and Urban Development Department | 24 CFR 200.944(a)(2) | ASTM D 3043 | 1987 | Standard Methods of Testing Structural Panels in Flexure | ASTM International | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 192.923(b)(1) | NACE RP-0502 | 2002 | NACE Standard Recommended Practice: Pipeline External Corrosion Direct Assessment Methodology | National Association of Corrosion Engineers | |
Nuclear Regulatory Commission | 10 CFR 50.55a(b)(2)(xviii)(B) | ASME B&PV Code | 1998 | Boiler and Pressure Vessel Code, Section XI, Paragraph IWA-2316 of the 1998 Edition through the latest edition and addenda, IWA-5211(a) and (b), 1998 Edition through the latest edition and addenda | American Society of Mechanical Engineers | |
Occupational Safety and Health Administration | 29 CFR 1926.57(f)(4)(i) | ANSI Z33.1 | 1961 | Installation of Blower and Exhaust Systems for Dust, Stock, and Vapor Removal or Conveying | American National Standards Institute | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (32) | APHA Method 6440 B | 2000 | Polynuclear Aromatic Hydrocarbons by Micro Liquid-Liquid Extraction Chromatographic Method | American Public Health Association | |
Environmental Protection Agency | 40 CFR 141.24(e)(1) Table (Simazine) | EPA Method 525.2 | 1995 | Determination of Organic Compounds in Drinking Water by Liquid-Solid Extraction and Capillary Column Gas Chromatography/Mass Spectrometry-Revision 2.0 | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 60.107a(d)(5)(iii) | ASME MFC-4M | 2008 | Measurement of Gas Flow by Turbine Meters | American Society of Mechanical Engineers | |
Environmental Protection Agency | 40 CFR 58 Appendix C, 2.9 | AWMA Publicaltion | 1988 | IMPROVE—a new remote area particulate monitoring system for visibility studies, Eldred, R.A., Cahill, T.A., Pitchford, M., and Malm, W.C.; Proceedings of the 81st Annual Meeting of the Air Pollution Control Association, Paper 88-54.3 | Air and Waste Management Association | |
Federal Aviation Administration | 14 CFR 152, Appendix B(a) | 150/5345-4 | 1967 | Specification for L-829 Internally Lighted Airport Taxi Guidance Sign (Through change 1, 1967) | Federal Aviation Administration, U.S. Department of Transportation | |
Coast Guard | 40 CFR 1065.705 Table 1 | ISO 14597 | 1997 | Petroleum products--Determination of vanadium and nickel content--Wavelength-dispersive X-ray fluorescence spectrometry | International Organization for Standardization | |
Architectural and Transportation Barriers Compliance Board | 36 CFR 1191, App B, 216.4.3 | ICC/IBC | 2003 | International Building Code | International Code Council | |
Coast Guard | 46 CFR 28.330(b) | NFPA 17 | 1994 | Standard for Dry Chemical Extinguishing Systems | National Fire Protection Association | |
Rural Utilities Service | 7 CFR 1755.860(a)(6) | ASTM D 1238 | 1990 | Standard Test Method for Flow Rates of Thermoplastics by Extrusion Plastometer | ASTM International | |
Environmental Protection Agency | 40 CFR 136.3(b)(33)(x) | USGS Open File Report (OFR) 98-639 | 1998 | Methods of Analysis by the U.S. Geological Survey National Water Quality Laboratory--Determination of Arsenic and Selenium in Water and Sediment by Graphite Furnace--Atomic Absorption Spectrometry | U.S. Geological Survey | |
Environmental Protection Agency | 40 CFR 80.46(h)(1)(xii) | ASTM D 5769 | 2010 | Standard Test Method for Determination of Aromatics in Finished Gasolines by Gas Chromatography (Mass Spectrometry) | ASTM International | |
Coast Guard | 46 CFR 169.703(c)(7) | ABYC A-22 | 1978 | Marine Compressed Natural Gas Systems | American Boat and Yacht Council | |
Coast Guard | 46 CFR 28.40(b) | IMO Resolution A.658(16) | 1989 | Use and Fitting of Retro-Reflective Materials on Life-Saving Appliances | International Maritime Organization | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (36) | APHA Method 3111 D | 1999 | Metals by Flame Atomic Absorption, Nitrous Oxide | American Public Health Association | |
Environmental Protection Agency | 40 CFR 141.23(k)(1) Table (9) Chromium | APHA Method 3120 B | 1992 | Metals by Inductively Coupled Plasma | American Public Health Association | |
Housing and Urban Development Department | 24 CFR 3280.304(b)(1) | APA U814H | 1990 | Design and Fabrication of Plywood Sandwich Panels, Suppl. 4 | APA--The Engineered Wood Association | |
Minerals Management Service | 30 CFR 250.803(b)(1)(i) | ASME B&PV Code | 2005 | Boiler and Pressure Vessel Code, Section I | American Society of Mechanical Engineers | |
Coast Guard | 21 CFR 135.110(e) | AOAC Official Methods | 1980 | Official Methods of Analysis | AOAC International | |
Coast Guard | 46 CFR 110.15-1(b), Nonsparking fan | ABS Publication | 2003 | Rules for Building and Classing Steel Vessels | American Bureau of Shipping | |
Coast Guard | 33 CFR 154, Appendix B, 7.1 | ASTM F 1155 | 1998 | Standard Practice for Selection and Application of Piping System Materials | ASTM International | |
Coast Guard | 46 CFR 63.05-1(e)(1) | IMO Resolution MEPC.76(40) | 1997 | Standard Specification for Shipboard Incinerators | International Maritime Organization | |
Energy Department | 10 CFR 430 Subpart B, App. R, 2.9 | IES LM-45 | 2000 | Method for Electrical and Photometric Measurements of General Service Incandescent Filament Lamps | Illuminating Engineering Society of North America | |
Coast Guard | 46 CFR 160.135-7(b)(3)(iv)(C) | MIL-P-17549D(SH) | 1981 | Military Specification, Plastic Laminates, Fibrous Glass Reinforced, Marine Structural | U.S. Department of Defense | |
National Highway Traffic Safety Administration | 49 CFR 572.183(c)(2) | Drawing No. 175-9000 | 2009 | Headform assembly | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Environmental Protection Agency | 40 CFR 136.3(b)(5)(iii)(R) | EPA Method 365.3 | 1978 | Phosphorus, All Forms (Colorimetric, Ascorbic Acid, Two Reagent) | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 435.15 Note 3 | EPA Method 1617 | 2015 | Static Sheen Test | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 82, Subpart B, Appendix A, Section (2) | SAE J-1989 | 1989 | Recommended Service Procedure for the Containment of R-12 | Society of Automotive Engineers | |
Food and Drug Administration | 21 CFR 133.5(a) | AOAC Official Methods | 1980 | Official Methods of Analysis | AOAC International | |
Environmental Protection Agency | 40 CFR 147.1751(b)(2) | NDUIC regulations | 1979 | North Dakota Century Code, Ch. 38-12 (Regulation, Development, and Production of Subsurface Minerals) | State of North Dakota | |
Environmental Protection Agency | 40 CFR 63.7732(g)(1)(v) | NIOSH Method 2010 | 1994 | Amines, Aliphatic, Issue 2 | National Institute for Occupational Safety and Health | |
Housing and Urban Development Department | 24 CFR 200, Appendix A | FedSpec L-F-1641 | 1971 | Floor Covering, Translucent or Transparent Vinyl Surface with Backing | Federal Specifications Standards and Test Methods | |
Research and Special Programs Administration | 49 CFR 172.102(c)(1) 129 | UN Publication | 2003 | UN Recommendations on the Transport of Dangerous Goods, Manual of Tests and Criteria | United Nations | |
Research and Special Programs Administration | 49 CFR 195.579(d) | API RP 652 | 1997 | Lining of Aboveground Petroleum Storage Tank Bottoms | American Petroleum Institute | |
Environmental Protection Agency | 40 CFR 59.401 Flat coating | ASTM D 523 | 1989 | Standard Test Method for Specular Gloss | ASTM International | |
Environmental Protection Agency | 40 CFR 86.113-04(a)(1) Table 1 | ASTM D 3237 | 2012 | Standard Test Method for Lead in Gasoline by Atomic Absorption Spectroscopy | ASTM International | |
Wage and Hour Division | 29 CFR 570.51(b)(3)(ii) | IME Publication 2 | 1964 | American Table of Distances for Storage of Explosives | Institute of Makers of Explosives | |
Coast Guard | 46 CFR 114.600(b) | Resolution A.760(18) | 1993 | Symbols Related to Life-Saving Appliances and Arrangements | International Maritime Organization | |
National Highway Traffic Safety Administration | 49 CFR 572.35(c)(2)(i) | Drawing No. 78051-52 | 1994 | Abdominal insert | General Motors Corporation |