| Rural Utilities Service |
|
7 CFR 1755.910(a)(7) |
ASTM D1693 |
1988 |
Standard Test Method for Environmental Stress-Cracking of Ethylene Plastics
Archived
|
ASTM International |
| Coast Guard |
|
33 CFR 154.106(c)(1) |
ANSI B16.5 |
1988 |
Steel Pipe Flanges and Pipe Fittings
Archived
|
American National Standards Institute |
| Coast Guard |
|
33 CFR 127.003(b) |
ANSI B16.5 |
1988 |
Steel Pipe Flanges and Pipe Fittings
Archived
|
American National Standards Institute |
| Coast Guard |
|
46 CFR 153.4(b) |
ANSI B16.5 |
1988 |
Steel Pipe Flanges and Pipe Fittings
Archived
|
American National Standards Institute |
| Coast Guard |
|
46 CFR 151.01-2 |
ASNT RP SNT-TC-1A |
1988 |
Personnel Qualification and Certification for Nondestructive Testing
Archived
|
American Society for Nondestructive Testing |
| Coast Guard |
|
46 CFR 98.01-3(b) |
ASNT RP SNT-TC-1A |
1988 |
Personnel Qualification and Certification for Nondestructive Testing
Archived
|
American Society for Nondestructive Testing |
| Environmental Protection Agency |
|
40 CFR 136.3(a) Table IB (19) |
AOAC Method 974.27 |
1988 |
Metals (Cd, Cr, Cu, Fe, Pb, Mg, Mn, As, and Zn) in Water - Atomic Absorption Spectrophotometric Method
|
AOAC International |
| Environmental Protection Agency |
|
40 CFR 136.3(a) Table IB (22) |
AOAC Method 974.27 |
1988 |
Metals (Cd, Cr, Cu, Fe, Pb, Mg, Mn, As, and Zn) in Water - Atomic Absorption Spectrophotometric Method
|
AOAC International |
| Environmental Protection Agency |
|
40 CFR 136.3(a) Table IB (30) |
AOAC Method 974.27 |
1988 |
Metals (Cd, Cr, Cu, Fe, Pb, Mg, Mn, As, and Zn) in Water - Atomic Absorption Spectrophotometric Method
|
AOAC International |
| Environmental Protection Agency |
|
40 CFR 136.3(a) Table IB (32) |
AOAC Method 974.27 |
1988 |
Metals (Cd, Cr, Cu, Fe, Pb, Mg, Mn, As, and Zn) in Water - Atomic Absorption Spectrophotometric Method
|
AOAC International |
| Environmental Protection Agency |
|
40 CFR 136.3(a) Table IB (33) |
AOAC Method 974.27 |
1988 |
Metals (Cd, Cr, Cu, Fe, Pb, Mg, Mn, As, and Zn) in Water - Atomic Absorption Spectrophotometric Method
|
AOAC International |
| Environmental Protection Agency |
|
40 CFR 136.3(a) Table IB (34) |
AOAC Method 974.27 |
1988 |
Metals (Cd, Cr, Cu, Fe, Pb, Mg, Mn, As, and Zn) in Water - Atomic Absorption Spectrophotometric Method
|
AOAC International |
| Environmental Protection Agency |
|
40 CFR 136.3(a) Table IB (44) |
ASTM D515A |
1988 |
Test Methods for Phosphorus in Water (Withdrawn 1997)
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 136.3(a) Table IB (50) |
ASTM D515A |
1988 |
Test Methods for Phosphorus in Water (Withdrawn 1997)
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 136.3(a) Table IB (50) |
USGS Open File Report (OFR) 98-165 |
1988 |
Methods of Analysis by the U.S. Geological Survey National Water Quality Laboratory—Determination of Elements in Whole-water Digests Using Inductively Coupled Plasma-Optical Emission Spectrometry and Inductively Coupled Plasma-Mass Spectrometry
|
U.S. Geological Survey |
| Environmental Protection Agency |
|
40 CFR 136.3(a) Table IB Footnote 50 |
USGS Open File Report (OFR) 98-165 |
1988 |
Methods of Analysis by the U.S. Geological Survey National Water Quality Laboratory—Determination of Elements in Whole-water Digests Using Inductively Coupled Plasma-Optical Emission Spectrometry and Inductively Coupled Plasma-Mass Spectrometry
|
U.S. Geological Survey |
| Environmental Protection Agency |
|
40 CFR 136.3(a) Table IB (50) |
ASTM D515B |
1988 |
Test Methods for Phosphorus in Water (Withdrawn 1997)
|
ASTM International |
| Energy Department |
|
10 CFR 440 Appendix A |
ASME B&PV Code |
1988 |
Boiler and Pressure Vessel Code, Section II
Archived
|
American Society of Mechanical Engineers |
| Energy Department |
|
10 CFR 440 Appendix A |
ASME CSD-1 |
1988 |
Controls and Safety Devices for Automatically Fired Boilers
Archived
|
American Society of Mechanical Engineers |
| Energy Department |
|
10 CFR 440 Appendix A |
ANSI Z21.66 |
1988 |
Electrically-Operated Automatic Vent Damper Devices for Use with Gas-Fired Appliances including Exhibits A and B
Archived
|
American National Standards Institute |
| Energy Department |
|
10 CFR 440 Appendix A |
ANSI Z21.47 |
1988 |
Gas-Fired Central Furnaces
Archived
|
American National Standards Institute |
| Energy Department |
|
10 CFR 440 Appendix A |
ANSI Z223.1 |
1988 |
National Fuel Gas Code
Archived
|
American National Standards Institute |
| Energy Department |
|
10 CFR 440 Appendix A |
ASTM C534 |
1988 |
Preformed Flexible Elastomeric Cellular Insulation in Sheet and Tubular Form
Archived
|
ASTM International |
| Energy Department |
|
10 CFR 440 Appendix A |
ASTM C552 |
1988 |
Cellular Glass Insulation
Archived
|
ASTM International |
| Energy Department |
|
10 CFR 440 Appendix A |
ASTM C665 |
1988 |
Blanket Mineral Fiber Insulation
Archived
|
ASTM International |
| Energy Department |
|
10 CFR 440 Appendix A |
ASTM C764 |
1988 |
Insulation, Loose-Fill Mineral Fiber
Archived
|
ASTM International |
| Energy Department |
|
10 CFR 440 Appendix A |
UL 17 |
1988 |
Stack and Damper, Oil-fueled
Archived
|
Underwriters Laboratories, Inc. |
| Energy Department |
|
10 CFR 440 Appendix A |
NFPA 211 |
1988 |
Standard for Chimneys, Fireplaces and Vents
Archived
|
National Fire Protection Association |
| Energy Department |
|
10 CFR 440 Appendix A |
ASTM C726 |
1988 |
Standard Specification for Mineral Fiber and Roof Insulating Board
Archived
|
ASTM International |
| Energy Department |
|
10 CFR 440 Appendix A |
ASTM D3678 |
1988 |
Standard Specification for Rubber Cellular Cushion Used for Carpet or Rug Underlay
Archived
|
ASTM International |
| Housing and Urban Development Department |
|
24 CFR 200, Appendix A |
ANSI/AAMA 101-88 |
1988 |
Voluntary Specifications for Aluminum Prime Windows and Sliding Glass Doors
Archived
|
American Architectural Manufacturers Association |
| Consumer Product Safety Commission |
|
16 CFR 1203.3(a)(2) |
SAE J-211 |
1988 |
Instrumentation for Impact Tests
Archived
|
Society of Automotive Engineers |
| Federal Highway Administration |
|
23 CFR 625.4(b)(7) |
AASHTO Publication |
1988 |
Standard Specification for Movable Highway Bridges
Archived
|
American Association of State Highway and Transportation Officials |
| Housing and Urban Development Department |
|
24 CFR 200, Appendix A |
AAMA 1504 |
1988 |
Voluntary Standards for Thermal Performance of Windows, Doors and Glazed Wall Sections
Archived
|
American Architectural Manufacturers Association |
| Housing and Urban Development Department |
|
24 CFR 200, Appendix A |
AAMA 1503.1 |
1988 |
Voluntary Test Method for Thermal Transmittance and Condensation Resistance of Windows, Doors and Glazed Wall Sections
Archived
|
American Architectural Manufacturers Association |
| Housing and Urban Development Department |
|
24 CFR 200, Appendix A |
ACI 306R |
1988 |
Cold Weather Concreting
Archived
|
American Concrete Institute |
| Housing and Urban Development Department |
|
24 CFR 200, Appendix A |
ACI 311.4R |
1988 |
Guide for Concrete Inspection
Archived
|
American Concrete Institute |
| Housing and Urban Development Department |
|
24 CFR 200, Appendix A |
ANSI A137.1 |
1988 |
Standard Specification for Ceramic Tile
Archived
|
American National Standards Institute |
| Housing and Urban Development Department |
|
24 CFR 200, Appendix A |
ASTM C726 |
1988 |
Standard Specification for Mineral Fiber and Roof Insulating Board
Archived
|
ASTM International |
| Housing and Urban Development Department |
|
24 CFR 200, Appendix A |
ASTM C754 |
1988 |
Installation of Steel Framing Members to Receive Screw-Attached Gypsum
Archived
|
ASTM International |
| Mine Safety and Health Administration |
|
30 CFR 75.301 Noncombustible structure or area |
ASTM E119 |
1988 |
Standard Test Methods for Fire Tests of Building Construction and Materials
Archived
|
ASTM International |
| Coast Guard |
|
46 CFR 160.176-4(b) |
ASTM D1434 |
1988 |
Standard Method for Determining Gas Permeability Characteristics of Plastic Film and Sheeting
Archived
|
ASTM International |
| Coast Guard |
|
46 CFR 160.077-5(b) |
ASTM D1434 |
1988 |
Standard Method for Determining Gas Permeability Characteristics of Plastic Film and Sheeting
Archived
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 60.17(g)(96) |
ASTM D2382 |
1988 |
Standard Test Method for Heat of Combustion of Hydrocarbon Fuels by Bomb Calorimeter (High-Precision Method)
Archived
|
ASTM International |
| Housing and Urban Development Department |
|
24 CFR 200, Appendix A |
ASHRAE Handbook |
1988 |
Equipment
Archived
|
American Society of Heating, Refrigerating and Air Conditioning Engineers |
| Environmental Protection Agency |
|
40 CFR 75.6(b)(6) |
ASME MFC-9M |
1988 |
Measurement of Liquid Flow in Closed Conduits by Weighing Method
Archived
|
American Society of Mechanical Engineers |
| Coast Guard |
|
10 CFR 440 Appendix A |
NWWDA I.S. 3 |
1988 |
Industry Standard for Wood Sliding Patio Doors
Archived
|
National Wood Window and Door Association |
| Housing and Urban Development Department |
|
24 CFR 200, Appendix A |
ARMA Publication |
1988 |
Residential Asphalt Roofing Manual
Archived
|
Asphalt Roofing Manufacturers Association |
| Occupational Safety and Health Administration |
|
29 CFR 1910.266(f)(3)(ii)(C) |
SAE J-1040 |
1988 |
Performance Criteria for Rollover Protective Structures (ROPS) for Construction, Earthmoving, Forestry and Mining Machines
Archived
|
Society of Automotive Engineers |
| Housing and Urban Development Department |
|
24 CFR 200.944(a)(4) |
APA PRP-108 |
1988 |
Performance Standards and Policies for Structural Use Panels
|
National Institute of Standards and Technology, U.S. Department of Commerce |