| Energy Department |
|
10 CFR 440 Appendix A |
ASTM C516 |
1990 |
Standard Specification for Vermiculite Loose Fill Thermal Insulation
Archived
|
ASTM International |
| Energy Department |
|
10 CFR 440 Appendix A |
ASTM E96 |
1990 |
Standard Test Methods for Water Vapor Transmission of Materials
Archived
|
ASTM International |
| Coast Guard |
|
16 CFR 1203.53(b) |
Snell B-90 |
1990 |
Standard for Protective Headgear for Use in Bicycling
Archived
|
Snell Memorial Foundation |
| Housing and Urban Development Department |
|
24 CFR 200, Appendix A |
ACI 506 |
1990 |
Recommended Practice for Shotcreting
Archived
|
American Concrete Institute |
| Coast Guard |
|
16 CFR 1203.53(b) |
Snell B-90S |
1990 |
Standard for Protective Headgear for Use in Bicycling with Supplement
Archived
|
Snell Memorial Foundation |
| Coast Guard |
|
46 CFR 56.01-2(e)(10) |
ASTM A179/A 179M |
1990 |
Standard Specification for Seamless Cold-Drawn Low-Carbon Steel Heat-Exchanger and Condenser Tubes
Archived
|
ASTM International |
| Coast Guard |
|
46 CFR 59.01-2(b)(1) |
ASME B&PV Code |
1990 |
Boiler and Pressure Vessel Code, Section I, Rules for Construction of Power Boilers
Archived
|
American Society of Mechanical Engineers |
| Housing and Urban Development Department |
|
24 CFR 200, Appendix A |
ASTM C842 |
1990 |
Standard Specification for Application of Interior Gypsum Plaster
Archived
|
ASTM International |
| Housing and Urban Development Department |
|
24 CFR 200, Appendix A |
ASTM C841 |
1990 |
Installation of Interior Lathing and Furring
Archived
|
ASTM International |
| Housing and Urban Development Department |
|
24 CFR 200, Appendix A |
ASTM C864 |
1990 |
Dense Elastomeric Compression Seal Gaskets, Setting Blocks and Spacers
Archived
|
ASTM International |
| Housing and Urban Development Department |
|
24 CFR 200, Appendix A |
ASTM C926 |
1990 |
Standard Specification for Application of Portland Cement-Based Plaster
Archived
|
ASTM International |
| National Archives and Records Administration |
|
36 CFR 1238.5(c)(8) |
AIIM MS45 |
1990 |
Recommended Practice for Inspection of Stored Silver-Gelatin Microforms for Evidence of Deterioration
Archived
|
Association for Information and Image Management |
| Coast Guard |
|
46 CFR 160.174-3(b) |
ASTM D1518 |
1990 |
Standard Test Method for Thermal Transmittance of Textile Materials
Archived
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 60.17(g)(33) |
ASTM D388 |
1990 |
Standard Classification of Coals by Rank
Archived
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 60.17(g)(16) |
ASTM D86 |
1990 |
Standard Test Method for Distillation of Petroleum Products at Atmospheric Pressure
Archived
|
ASTM International |
| Housing and Urban Development Department |
|
24 CFR 200, Appendix A |
ASTM E330 |
1990 |
Standard Test Method for Structural Performance of Exterior Windows, Curtain Walls, and Doors by Uniform Static Air Pressure Difference
Archived
|
ASTM International |
| Housing and Urban Development Department |
|
24 CFR 200, Appendix A |
AWS D1.1 |
1990 |
Structural Welding Code--Steel
Archived
|
American Welding Society |
| Housing and Urban Development Department |
|
24 CFR 200, Appendix A |
FGMA Publication |
1990 |
FGMA Sealant Manual
Archived
|
Flat Glass Marketing Association |
| Coast Guard |
|
46 CFR 110.10-1(f)(3) |
IEEE C37.13 |
1990 |
Standard for Low-Voltage AC Power Circuit Breakers Used in Enclosures
Archived
|
Institute of Electrical and Electronics Engineers |
| Coast Guard |
|
21 CFR 165.110(b)(4)(iii)(F) |
EPA-600-4-90-020 |
1990 |
Methods for the Determination of Organic Compounds in Drinking Water, Supplement 1
Archived
|
U.S. Environmental Protection Agency |
| Energy Department |
|
10 CFR 434.701.1 RS-23 |
ANSI Z83.9 |
1990 |
Gas-Fired Duct Furnaces (RS-23)
Archived
|
American National Standards Institute |
| Energy Department |
|
10 CFR 434.701.1 RS-8 |
ASTM C976 |
1990 |
Standard Test Method for Thermal Performance of Building Assemblies by Means of a Calibrated Hot Box (RS-8)
Archived
|
ASTM International |
| Occupational Safety and Health Administration |
|
29 CFR 1917.3(b)(1) |
ANSI A14.1 |
1990 |
Safety Requirements for Portable Wood Ladders
Archived
|
American National Standards Institute |
| Occupational Safety and Health Administration |
|
29 CFR 1917.3(b)(2) |
ANSI A14.2 |
1990 |
Safety Requirements for Portable Metal Ladders
Archived
|
American National Standards Institute |
| Coast Guard |
|
33 CFR 127.003(b) |
NFPA 251 |
1990 |
Standard Methods of Fire Tests for Building Construction and Materials
Archived
|
National Fire Protection Association |
| Federal Trade Commission |
|
16 CFR 460.5(e)(1)(iv) |
ASTM C1045 |
1990 |
Standard Test Method for Calculating Thermal Transmission Properties from Steady-State Heat Flux Measurements
Archived
|
ASTM International |
| Coast Guard |
|
46 CFR 175.600(b) Table |
ABYC E-9 |
1990 |
Direct Current (DC) Electrical Systems on Boats
Archived
|
American Boat and Yacht Council |
| Pipeline and Hazardous Materials Safety Administration |
|
49 CFR 171.7(a)(3) |
ASTM D4359 |
1990 |
Standard Test Method for Determining Whether a Material is a Liquid or a Solid
Archived
|
ASTM International |
| Pipeline and Hazardous Materials Safety Administration |
|
49 CFR 171.7(a)(3) |
ISO 1496-1 |
1990 |
Series 1 Freight Containers--Specification and Testing--Part 1, General Cargo Containers
Archived
|
International Organization for Standardization |
| Occupational Safety and Health Administration |
|
29 CFR 1918.3(b)(1) |
ANSI A14.1 |
1990 |
Safety Requirements for Portable Wood Ladders
Archived
|
American National Standards Institute |
| Occupational Safety and Health Administration |
|
29 CFR 1918.3(b)(2) |
ANSI A14.2 |
1990 |
Safety Requirements for Portable Metal Ladders
Archived
|
American National Standards Institute |
| Public Health Service |
|
42 CFR 37.10(b)(3) |
AAPM Report No. 31 |
1990 |
Standardized Methods for Measuring Diagnostic X-Ray Exposures, Report of Task Group 8, Diagnostic X-Ray Imaging Committee
Archived
|
American Association of Physicists in Medicine |
| Coast Guard |
|
46 CFR 161.002-1(b) |
Lloyd's Publication |
1990 |
LR Type Approval System: Test Specification Number 1
Archived
|
Lloyd's Register of Shipping |
| Coast Guard |
|
46 CFR 175.600(b) Table |
MIL-R-21607E(SH) |
1990 |
Resins, Polyester, Low Pressure Laminating, Fire Retardant
Archived
|
U.S. Department of Defense |
| Environmental Protection Agency |
|
40 CFR 60.17(g)(40) |
ASTM D396 |
1990 |
Standard Specification for Fuel Oils
Archived
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 60.17(g)(48) |
ASTM D1072 |
1990 |
Standard Test Method for Total Sulfur in Fuel Gases
Archived
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 60.17(g)(49) |
ASTM D1072 |
1990 |
Standard Test Method for Total Sulfur in Fuel Gases
Archived
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 60.17(g)(91) |
ASTM D2369 |
1990 |
Standard Test Method for Volatile Content of Coatings
Archived
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 60.17(g)(142) |
ASTM D4017 |
1990 |
Standard Test Method for Water in Paints and Paint Materials by the Karl Fischer Titration Method
Archived
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 63.14(g)(11) |
ASTM D1475 |
1990 |
Standard Test Method for Density of Paint, Varnish, Lacquer, and Related Products
Archived
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 194.5(a)(3) |
ASME NQA-2a |
1990 |
Addenda, part 2.7, to ASME NQA-2-1989 edition Quality Assurance Requirements for Nuclear Facility Applications
Archived
|
American Society of Mechanical Engineers |
| Environmental Protection Agency |
|
40 CFR 88.104-94(k)(2) |
CA State Publication |
1990 |
California Regulatory Requirements Applicable to the Clean Fuel Fleet and California Pilot Programs
Archived
|
State of California |
| Environmental Protection Agency |
|
40 CFR 91.6(b)(1) Table |
ASTM D323 |
1990 |
Standard Test Method for Vapor Pressure of Petroleum Products (Reid Method)
Archived
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 60.17(g)(59) |
ASTM D1475 |
1990 |
Standard Test Method for Density of Paint, Varnish, Lacquer, and Related Products
Archived
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 75.6(e)(1) |
AGA Report No. 3, Part 1 |
1990 |
Orifice Metering for Natural Gas and Other Related Hydrocarbon Fluids, Part 1: General Equations and Uncertainty Guidelines
Archived
|
American Gas Association |
| Environmental Protection Agency |
|
40 CFR 72.13(a)(2) |
ASTM D396 |
1990 |
Standard Specification for Fuel Oils
Archived
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 75.6(a)(15) |
ASTM D1946 |
1990 |
Standard Test Method for Analysis of Reformed Gas by Gas Chromatography
Archived
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 72.13(a)(4) |
ASTM D2880 |
1990 |
Standard Specification for Gas Turbine Fuel Oils
Archived
|
ASTM International |
| Food Safety and Inspection Service |
|
9 CFR 319.700(a) |
AOAC Official Methods |
1990 |
Official Methods of Analysis
Archived
|
AOAC International |
| Coast Guard |
|
36 CFR 1235.4(e)(2) |
ANSI X3.180 |
1990 |
Magnetic Tape and Cartridge for Information Interchange - 18-Track, Parallel, 1/2-inch (12.65mm), 37 871 CPI (1491 cpmm), Group-Coded Requirements for Recording
Archived
|
American National Standards Institute |