| Nuclear Regulatory Commission |
|
10 CFR 50.55a(b) |
NRC Regulatory Guide 1.192 |
2003 |
Operation and Maintenance Code Case Acceptability, ASME OM Code
Archived
|
U.S. Nuclear Regulatory Commission |
| Energy Department |
|
10 CFR 431.95(b)(1) |
ARI 210/240 |
2003 |
Unitary Air-Conditioning and Air-Source Heat Pump Equipment
Archived
|
Air Conditioning and Refrigeration Institute |
| Occupational Safety and Health Administration |
|
29 CFR 1915.5(d)(1)(x) |
ANSI Z89.1 |
2003 |
Safety Requirements for Industrial Head Protection
Archived
|
American National Standards Institute |
| Occupational Safety and Health Administration |
|
29 CFR 1917.3(b)(10) |
ANSI/ISEA Z89.1 |
2003 |
Safety Requirements for Industrial Head Protection
Archived
|
International Safety Equipment Association |
| Occupational Safety and Health Administration |
|
29 CFR 1918.3(b)(10) |
ANSI/ISEA Z89.1 |
2003 |
Safety Requirements for Industrial Head Protection
Archived
|
International Safety Equipment Association |
| Safety and Environmental Enforcement Bureau |
|
30 CFR 250.198(g)(4) |
ANSI/ASME B16.5 |
2003 |
Steel Pipe Flanges and Pipe Fittings
Archived
|
American Society of Mechanical Engineers |
| Occupational Safety and Health Administration |
|
29 CFR 1917.3(b)(6) |
ANSI/ISEA Z87.1 |
2003 |
Practice for Occupational and Educational Eye and Face Protection
Archived
|
International Safety Equipment Association |
| Occupational Safety and Health Administration |
|
29 CFR 1915.5(d)(1)(vi) |
ANSI Z87.1 |
2003 |
Practice for Occupational and Educational Eye and Face Protection
Archived
|
American National Standards Institute |
| Occupational Safety and Health Administration |
|
29 CFR 1915.5(d)(4)(vii) |
NFPA 14 |
2003 |
Standard for the Installation of Standpipe, Private Hydrant, and Hose Systems
Archived
|
National Fire Protection Association |
| Occupational Safety and Health Administration |
|
29 CFR 1915.5(d)(4)(x) |
NFPA 750 |
2003 |
Standard on Water Mist Fire Protection Systems
Archived
|
National Fire Protection Association |
| Safety and Environmental Enforcement Bureau |
|
30 CFR 250.198(g)(5) |
ASME B31.8 |
2003 |
Gas Transmission and Distribution Piping Systems
Archived
|
American Society of Mechanical Engineers |
| Safety and Environmental Enforcement Bureau |
|
30 CFR 250.198(h)(28) |
API MPMS |
2003 |
Chapter 9, Section 2
Archived
|
American Petroleum Institute |
| Safety and Environmental Enforcement Bureau |
|
30 CFR 250.198(h)(67) |
API RP 2556 |
2003 |
Recommended Practice for Correcting Gauge Tables for Incrustation
Archived
|
American Petroleum Institute |
| Safety and Environmental Enforcement Bureau |
|
30 CFR 250.198(h)(11) |
API MPMS |
2003 |
Chapter 4, Section 2
Archived
|
American Petroleum Institute |
| Safety and Environmental Enforcement Bureau |
|
30 CFR 250.198(h)(14) |
API MPMS |
2003 |
Chapter 4, Section 6
Archived
|
American Petroleum Institute |
| Safety and Environmental Enforcement Bureau |
|
30 CFR 250.198(h)(15) |
API MPMS |
2003 |
Chapter 4, Section 7
Archived
|
American Petroleum Institute |
| Safety and Environmental Enforcement Bureau |
|
30 CFR 250.198(h)(38) |
API MPMS |
2003 |
Chapter 12, Section 2, Part 2
Archived
|
American Petroleum Institute |
| Safety and Environmental Enforcement Bureau |
|
30 CFR 250.198(h)(39) |
API MPMS |
2003 |
Chapter 14, Section 3, Part 1
Archived
|
American Petroleum Institute |
| Safety and Environmental Enforcement Bureau |
|
30 CFR 250.198(h)(71) |
API 6A V1 |
2003 |
Specification for Verification Test of Wellhead Surface Safety Valves and Underwater Safety Valves for Offshore Service
Archived
|
American Petroleum Institute |
| Safety and Environmental Enforcement Bureau |
|
30 CFR 250.198(k)(1) |
NACE MR-0175 |
2003 |
Sulfide Stress Cracking Resistant Metallic Materials for Oil Field Equipment
Archived
|
National Association of Corrosion Engineers |
| Safety and Environmental Enforcement Bureau |
|
30 CFR 250.198(k)(2) |
NACE RP-0176 |
2003 |
Standard Recommended Practice for Corrosion Control of Steel Fixed Offshore Platforms Associated with Petroleum Production
Archived
|
National Association of Corrosion Engineers |
| Coast Guard |
|
33 CFR 164.03(b) |
IMO SN/Circ. 227 |
2003 |
Guidelines for the Installation of a Shipborne Automatic Identification System (AIS)
Archived
|
International Maritime Organization |
| Coast Guard |
|
46 CFR 58.03-1(c)(1) |
ABS Publication |
2003 |
Rules for Building and Classing Steel Vessels, Part 4 Vessel Systems and Machinery
Archived
|
American Bureau of Shipping |
| Energy Department |
|
10 CFR 430.3(o)(1) |
DOE Publication |
2003 |
ENERGY STAR Program Requirements for [Compact Fluorescent Lamps] CFLs, Version 3.0
Archived
|
U.S. Department of Energy |
| Coast Guard |
|
46 CFR 62.05-1(b) |
ABS Publication |
2003 |
Rules for Building and Classing Steel Vessels, Part 4 Vessel Systems and Machinery
Archived
|
American Bureau of Shipping |
| Federal Trade Commission |
|
16 CFR 460.5(e)(1)(iii) |
ASTM C739 |
2003 |
Standard Specification for Cellulosic Fiber (Wood-Base) Loose-Fill Thermal Insulation
Archived
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 98.7(e)(10) |
ASTM D1945 |
2003 |
Standard Test Method for Analysis of Natural Gas by Gas Chromatography
Archived
|
ASTM International |
| Federal Trade Commission |
|
16 CFR 460.5(e)(1)(vii) |
ASTM C1224 |
2003 |
Standard Specification for Reflective Insulation for Building Applications
Archived
|
ASTM International |
| Federal Trade Commission |
|
16 CFR 460.5(e)(1)(x) |
ASTM C1374 |
2003 |
Standard Test Method for Determination of Installed Thickness of Pneumatically Applied Loose-Fill Building Insulation
Archived
|
ASTM International |
| Pipeline and Hazardous Materials Safety Administration |
|
49 CFR 171.7(a)(3) |
ASTM A1008/A 1008M |
2003 |
Standard Specification for Steel, Sheet, Cold-Rolled, Carbon, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, Solution Hardened, and Bake Hardenable
Archived
|
ASTM International |
| Pipeline and Hazardous Materials Safety Administration |
|
49 CFR 171.7(a)(3) |
ASTM A1011/A 1011M |
2003 |
Standard Specification for Steel, Sheet and Strip, Hot-Rolled, Carbon, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, and Ultra-High Strength
Archived
|
ASTM International |
| Pipeline and Hazardous Materials Safety Administration |
|
49 CFR 171.7(a)(3) |
CI A Kit |
2003 |
Chlorine Institute Emergency Kit "A" for 100-lb. & 150-lb. Chlorine Cylinders (with the exception of repair method using Device 8 for side leaks)
Archived
|
Chlorine Institute, Inc. |
| Pipeline and Hazardous Materials Safety Administration |
|
49 CFR 171.7(a)(3) |
CI B Kit |
2003 |
Chlorine Institute Emergency Kit "B" for Chlorine Ton Containers (with the exception of repair method using Device 9 for side leaks)
Archived
|
Chlorine Institute, Inc. |
| Pipeline and Hazardous Materials Safety Administration |
|
49 CFR 171.7(a)(3) |
CI Pamphlet 57 |
2003 |
Emergency Shut-Off Systems for Bulk Transfer of Chlorine
Archived
|
Chlorine Institute, Inc. |
| Pipeline and Hazardous Materials Safety Administration |
|
49 CFR 192.7(c)(2) B6 |
API RP 1162 |
2003 |
Public Awareness Programs for Pipeline Operators
Archived
|
American Petroleum Institute |
| Occupational Safety and Health Administration |
|
29 CFR 1918.3(b)(6) |
ANSI/ASSE Z87.1 |
2003 |
Practice for Occupational and Educational Eye and Face Protection
Archived
|
American Society of Safety Engineers |
| Veterans Affairs Department |
|
38 CFR 39.63 |
NFPA 101 |
2003 |
Life Safety Code
Archived
|
National Fire Protection Association |
| Veterans Affairs Department |
|
38 CFR 39.63 |
NFPA 5000 |
2003 |
Building Construction and Safety Code
Archived
|
National Fire Protection Association |
| Veterans Affairs Department |
|
38 CFR 39.63 |
IAPMO Publication |
2003 |
Uniform Mechanical Code
Archived
|
International Association of Plumbing and Mechanical Officials |
| Coast Guard |
|
46 CFR 110.10-1(k)(3) |
NEMA Standards Publication No. ICS 2.4 |
2003 |
NEMA and IEC Devices for Motor Service—a Guide for Understanding the Differences
Archived
|
National Electrical Manufacturers Association |
| Coast Guard |
|
46 CFR 110.10-1(l)(4) |
NFPA 496 |
2003 |
Standard for Purged and Pressurized Enclosures for Electrical Equipment
Archived
|
National Fire Protection Association |
| Coast Guard |
|
46 CFR 110.10-1(g)(30) |
IEC 60947-2 |
2003 |
Low-Voltage Switchgear and Controlgear Part 2: Circuit-Breakers, Third Edition
Archived
|
International Electrotechnical Commission |
| Coast Guard |
|
46 CFR 110.10-1(g)(32) |
IEC 62271-100 |
2003 |
High-voltage switchgear and controlgear—part 100: High-voltage alternating current circuitbreakers, Edition 1.1
Archived
|
International Electrotechnical Commission |
| Coast Guard |
|
46 CFR 110.10-1(m)(3) |
MIL-W-76D |
2003 |
Military Specification Wire and Cable, Hook-Up, Electrical, Insulated, General Specification for (2003) (Revision of MIL-W-76D-1992) Amendment 1-2003 (Feb. 6, 2003)
Archived
|
U.S. Department of Defense |
| Energy Department |
|
10 CFR 430.3(c)(14) |
ANSI C82.3 |
2002 |
Reference Ballasts for Fluorescent Lamps
Archived
|
American National Standards Institute |
| Occupational Safety and Health Administration |
|
29 CFR 1915.5(d)(4)(i) |
NFPA 1981 |
2002 |
Standard on Open-Circuit Self-Contained Breathing Apparatus for the Fire Service
Archived
|
National Fire Protection Association |
| Occupational Safety and Health Administration |
|
29 CFR 1915.5(d)(4)(vi) |
NFPA 10 |
2002 |
Standard for Portable Fire Extinguishers
Archived
|
National Fire Protection Association |
| Occupational Safety and Health Administration |
|
29 CFR 1915.5(d)(4)(viii) |
NFPA 72 |
2002 |
National Fire Alarm Code
Archived
|
National Fire Protection Association |
| Occupational Safety and Health Administration |
|
29 CFR 1915.5(d)(4)(ix) |
NFPA 13 |
2002 |
Standard for the Installation of Sprinkler Systems
Archived
|
National Fire Protection Association |
| Occupational Safety and Health Administration |
|
29 CFR 1915.5(d)(4)(xi) |
NFPA 25 |
2002 |
Standard for the Inspection, Testing, and Maintenance of Water-based Fire Protection Systems
Archived
|
National Fire Protection Association |