| Labor Department |
89 FR 99085 |
30 CFR 74 |
ANSI/ISA 60079–25 |
2011 |
Testing, Evaluation, and Approval of Electric Motor-Driven Mine Equipment and Accessories
|
International Society of Automation |
| Energy Department |
85 FR 50757 |
10 CFR 430 |
IEC 62301 Ed. 1.0 b:2005 |
2011 |
Energy Conservation Program: Test Procedures for Cooking Products
|
International Electrotechnical Commission |
| Environmental Protection Agency |
|
40 CFR 435.41(mm) |
EPA-821-R-11-004 |
2011 |
Analytic Methods for the Oil and Gas Extraction Point Source Category
|
U.S. Environmental Protection Agency |
| Coast Guard |
|
46 CFR 56.01-2(e)(72) |
ASTM F1020 |
2011 |
Standard Specification for Line-Blind Valves for Marine Applications
|
ASTM International |
| Federal Communications Commission |
|
47 CFR 80.1101(b) |
47 CFR 80.1063 |
2011 |
Special requirements for INMARSAT-E EPIRB stations
|
Federal Communications Commission |
| National Highway Traffic Safety Administration |
|
49 CFR 572.175(a) |
Drawing No. 420-3560 |
2011 |
Chest flesh assembly
|
National Highway Traffic Safety Administration, U.S. Department of Transportation |
| Environmental Protection Agency |
|
40 CFR 63.14(g)(44) |
ASTM D4006 |
2011 |
Standard Test Method for Water in Crude Oil by Distillation, including Annex A1 and Appendix X1
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 435.13 Note 10 |
EPA Method 1674 |
2011 |
Determination of the Amount of Non-Aqueous Drilling Fluid (NAF) Base Fluid from Drill Cuttings by a Retort Chamber (Derived from API Recommended Practice 13B-2)
|
U.S. Environmental Protection Agency |
| Occupational Safety and Health Administration |
|
29 CFR 1926.200(i) |
ANSI Z535.2 |
2011 |
Environmental and Facility Safety Signs
|
American National Standards Institute |
| Environmental Protection Agency |
|
40 CFR 63.7575 Biodiesel |
ASTM D6751 |
2011 |
Standard Specification for Biodiesel Fuel Blend Stock (B100) for Middle Distillate Fuels
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 63, Subpart DDDDD, Table 6, 4(f) |
ASTM D3683 |
2011 |
Standard Test Method for Trace Elements in Coal and Coke Ash by Atomic Absorption
|
ASTM International |
| National Highway Traffic Safety Administration |
|
49 CFR 572.170(b)(2)(vi) |
Drawing No. 420-5000-1 |
2011 |
Complete Leg Assembly—left
|
National Highway Traffic Safety Administration, U.S. Department of Transportation |
| National Highway Traffic Safety Administration |
|
49 CFR 572.177(a)(5) |
Part No. 420-0000 |
2011 |
Engineering drawings and specifications
|
National Highway Traffic Safety Administration, U.S. Department of Transportation |
| Environmental Protection Agency |
|
40 CFR 86.1(g)(22) |
SAE J-2064 |
2011 |
R134a Refrigerant Automotive Air-Conditioned Hose
|
Society of Automotive Engineers |
| Public Health Service |
|
42 CFR 37.10(f)(6) |
DICOM Standard PS 3.14-2011 |
2011 |
Digital Imaging and Communications in Medicine (DICOM) standard, Part 14: Grayscale Standard Display Function
|
National Electrical Manufacturers Association |
| Environmental Protection Agency |
|
40 CFR 63, Subpart DDDDD, Table 6, 2(e) |
ASTM D4057 |
2011 |
Standard Practice for Manual Sampling of Petroleum and Petroleum Products, including Annex A1
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 55.14(d)(22)(i) |
40 CFR part 52, subpart VV |
2011 |
Outer Continental Shelf Air Regulations Consistency Update for Virginia
|
U.S. Environmental Protection Agency |
| Federal Communications Commission |
88 FR 67108 |
47 CFR 15 |
ETSI EN 300 422-1 V1.4.2 (2011- 08) |
2011 |
Updating References to Standards Related to the Commission's Equipment Authorization Program
|
European Telecommunications Standards Institute |
| National Highway Traffic Safety Administration |
|
49 CFR 572.171 Table A (vi) |
Drawing No. 420-5000-2 |
2011 |
Complete Leg Assembly, right
|
National Highway Traffic Safety Administration, U.S. Department of Transportation |
| Energy Department |
88 FR 17934 |
10 CFR 431 |
ASME MFC-8M-2001 (R2011) |
2011 |
Energy Conservation Program: Test Procedure for Commercial and Industrial Pumps
|
American Society of Mechanical Engineers |
| Occupational Safety and Health Administration |
|
29 CFR 1926.97(c)(2)(ix) Note to paragraph (c)(2)(ix) |
ASTM D1050 |
2011 |
Standard Specification for Rubber Insulating Line Hose
|
ASTM International |
| Energy Department |
88 FR 66152 |
10 CFR 431 |
ANSI/AHRI 1320-2011 (I- P) |
2011 |
Energy Conservation Program: Test Procedure for Commercial Refrigerators, Refrigerator-Freezers, and Freezers
|
Air Conditioning, Heating, and Refrigeration Institute |
| Energy Department |
87 FR 51492 |
10 CFR 430 |
IEC 62301:2005 |
2011 |
Energy Conservation Program: Test Procedure for Cooking Products
|
International Electrotechnical Commission |
| Occupational Safety and Health Administration |
|
29 CFR 1910.6(e)(67) |
ANSI Z535.2 |
2011 |
Environmental and Facility Safety Signs
|
American National Standards Institute |
| National Highway Traffic Safety Administration |
|
49 CFR 572.173(b)(1)(i) |
Part No. 420-0000 |
2011 |
Engineering drawings and specifications
|
National Highway Traffic Safety Administration, U.S. Department of Transportation |
| Federal Communications Commission |
88 FR 21424 |
47 CFR 67 |
RTCM 12800.0 |
2011 |
Establishment of the Space Bureau and the Office of International Affairs and Reorganization of the Consumer and Governmental Affairs Bureau and the Office of the Managing Director
|
Radio Technical Commission for Maritime Services |
| Environmental Protection Agency |
|
40 CFR 435.11(ee) |
EPA-821-R-11-004 |
2011 |
Analytic Methods for the Oil and Gas Extraction Point Source Category
|
U.S. Environmental Protection Agency |
| Environmental Protection Agency |
|
40 CFR 63, Subpart DDDDD, Table 6, 2(a) |
ASTM D7430 |
2011 |
Standard Practice for Mechanical Sampling of Coal
|
ASTM International |
| Energy Department |
88 FR 66152 |
10 CFR 429 |
ANSI/AHRI 1320-2011 (I- P) |
2011 |
Energy Conservation Program: Test Procedure for Commercial Refrigerators, Refrigerator-Freezers, and Freezers
|
Air Conditioning, Heating, and Refrigeration Institute |
| Environmental Protection Agency |
|
40 CFR 60.17(g)(200) |
ASTM E1584 |
2011 |
Standard Test Method for Assay of Nitric Acid
|
ASTM International |
| Federal Communications Commission |
|
47 CFR 80.1101(b) |
47 CFR 80.1061 |
2011 |
Special requirements for 406.0-406.1 MHz EPIRB stations
|
Federal Communications Commission |
| National Highway Traffic Safety Administration |
|
49 CFR 572.175(a) |
Drawing No. 420-3000 |
2011 |
Upper Torso Assembly
|
National Highway Traffic Safety Administration, U.S. Department of Transportation |
| Environmental Protection Agency |
|
40 CFR 435.13 Note 10 |
EPA-821-R-11-004 |
2011 |
Analytic Methods for the Oil and Gas Extraction Point Source Category
|
U.S. Environmental Protection Agency |
| Occupational Safety and Health Administration |
|
29 CFR 1926.200(i) |
ANSI Z535.5 |
2011 |
Safety Tags and Barricade Tapes (for Temporary Hazards)
|
American National Standards Institute |
| Environmental Protection Agency |
|
40 CFR 63.7575 Distillate oil |
ASTM D975 |
2011 |
Standard Specification for Diesel Fuel Oils
|
ASTM International |
| Homeland Security Department |
88 FR 16310 |
46 CFR 113 |
UL 674 2011 |
2011 |
Update to Electrical Engineering Regulations
|
Underwriters Laboratories, Inc. |
| Energy Department |
87 FR 55090 |
10 CFR 430 |
IEC 62040-3 Ed. 2.0 |
2011 |
Energy Conservation Program: Test Procedure for Battery Chargers
|
International Electrotechnical Commission |
| National Highway Traffic Safety Administration |
|
49 CFR 572.170(b)(2)(vii) |
Drawing No. 420-5000-2 |
2011 |
Complete Leg Assembly—right
|
National Highway Traffic Safety Administration, U.S. Department of Transportation |
| Food Safety and Inspection Service |
|
45 CFR 162.920(d)(1) |
NACHA Publication |
2011 |
2011 NACHA Operating Rules & Guidelines, A Complete Guide to the Rules Governing the ACH Network, NACHA Operating Rules, Appendix One: ACH File Exchange Specifications (Operating Rule 59)
|
National Automated Clearing House Association |
| Public Health Service |
|
42 CFR 37.10(f)(7) |
DICOM Standard PS 3.16-2011 |
2011 |
Digital Imaging and Communications in Medicine (DICOM) standard, Part 16: Content Mapping Resource
|
National Electrical Manufacturers Association |
| Federal Communications Commission |
86 FR 23614 |
47 CFR 2 |
ANSI C63.19-2011 |
2011 |
Standards for Hearing Aid-Compatible Handsets
|
American National Standards Institute |
| National Highway Traffic Safety Administration |
|
49 CFR 572.171 Table A (vii) |
Drawing No. 420-7000-1 |
2011 |
Complete Arm Assembly, left
|
National Highway Traffic Safety Administration, U.S. Department of Transportation |
| National Highway Traffic Safety Administration |
|
49 CFR 572.177(b)(6) |
Part No. 420-0000 |
2011 |
Engineering drawings and specifications
|
National Highway Traffic Safety Administration, U.S. Department of Transportation |
| Environmental Protection Agency |
|
40 CFR 435.11(d) |
EPA Method 1674 |
2011 |
Determination of the Amount of Non-Aqueous Drilling Fluid (NAF) Base Fluid from Drill Cuttings by a Retort Chamber (Derived from API Recommended Practice 13B-2)
|
U.S. Environmental Protection Agency |
| Coast Guard |
|
40 CFR 63.14(g)(76) |
ASTM D6357 |
2011 |
Determination of Trace Elements in Coal, Coke, and Combustion Residues from Coal Utilization Processes by Inductively Coupled Plasma Atomic Emission Spectrometry, Inductively Coupled Plasma MS, Graphite Furnace Atomic Absorption Spectrometry
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 63.11237 Distillate oil |
ASTM D975 |
2011 |
Standard Specification for Diesel Fuel Oils
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 63.1329(c)(2)(i) |
ASTM D2908 |
2011 |
Standard Practice for Measuring Volatile Organic Matter in Water by Aqueous-Injection Gas Chromatography
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 63, Subpart DDDDD, Table 6, 4(d) |
ASTM D5864 |
2011 |
Standard Test Method for Determining Aerobic Aquatic Biodegradation of Lubricants or Their Components
|
ASTM International |
| Environmental Protection Agency |
86 FR 34308 |
40 CFR 1066 |
SAE J1594 (J1594_201007) |
2011 |
Improvements for Heavy-Duty Engine and Vehicle Test Procedures, and Other Technical Amendments
|
SAE International |
| Energy Department |
87 FR 37685 |
10 CFR 431 |
IEC 63103:2020 |
2011 |
Energy Conservation Program: Test Procedure for Metal Halide Lamp Fixtures
|
International Electrotechnical Commission |