| Transportation Department |
85 FR 27810 |
49 CFR 173 |
ISO 11120:2015 |
2015 |
Hazardous Materials: Harmonization With International Standards
|
International Organization for Standardization |
| Transportation Department |
89 FR 25434 |
49 CFR 171 |
ISO 11118:2015(E) |
2015 |
Hazardous Materials: Harmonization With International Standards
|
International Organization for Standardization |
| Environmental Protection Agency |
|
40 CFR 272, Subpart XX |
WVHWMP |
2015 |
State of West Virginia Hazardous Waste Management Program (Reserved)
|
State of West Virginia |
| Federal Trade Commission |
80 FR 71689 |
16 CFR 500.19 |
National Institute of Standards and Technology (NIST) Handboo... |
2015 |
Checking the Net Contents of Packaged Goods, Appendix E—General Tables of Units of Measurements
|
National Institute of Standards and Technology, U.S. Department of Commerce |
| Homeland Security Department |
89 FR 85340 |
6 CFR 37 |
FIPS PUB 180–4 |
2015 |
Minimum Standards for Driver's Licenses and Identification Cards Acceptable by Federal Agencies for Official Purposes; Waiver for Mobile Driver's Licenses
|
National Institute of Standards and Technology, U.S. Department of Commerce |
| Environmental Protection Agency |
|
40 CFR 435.41(e) |
EPA Method 1646 |
2015 |
Procedure for Mixing Base Fluids With Sediments
|
U.S. Environmental Protection Agency |
| Health and Human Services Department |
89 FR 51738 |
21 CFR 4 |
ISO 9000 |
2015 |
Current Good Manufacturing Practice, Certification, Postmarketing Safety Reporting, and Labeling Requirements for Certain Medical Gases
|
International Organization for Standardization |
| Energy Department |
87 FR 63588 |
10 CFR 429 |
IEC 60079-7:2015 |
2015 |
Energy Conservation Program: Test Procedure for Electric Motors
|
International Electrotechnical Commission |
| Environmental Protection Agency |
|
40 CFR 265.192(a)(3)(ii)(C) Note |
API 1632 |
2015 |
Cathodic Protection of Underground Petroleum Storage Tanks and Piping Systems
|
American Petroleum Institute |
| Transportation Department |
89 FR 25434 |
49 CFR 171 |
ISO 11623:2015(E) |
2015 |
Hazardous Materials: Harmonization With International Standards
|
International Organization for Standardization |
| Homeland Security Department |
88 FR 16310 |
46 CFR 110 |
IEEE C37.27-2015 |
2015 |
Update to Electrical Engineering Regulations
|
Institute of Electrical and Electronics Engineers |
| Environmental Protection Agency |
|
40 CFR 435.11(gg) |
EPA Method 1619 |
2015 |
Suspended Particulate Phase (SPP) Toxicity Test
|
U.S. Environmental Protection Agency |
| Environmental Protection Agency |
|
40 CFR 435.45 Note 4 |
EPA Method 1619 |
2015 |
Suspended Particulate Phase (SPP) Toxicity Test
|
U.S. Environmental Protection Agency |
| Energy Department |
82 FR 59947 |
10 CFR 851 |
ASME BPVC.III.1.NG-2015 |
2015 |
Worker Safety and Health Program
|
American Society of Mechanical Engineers |
| Transportation Department |
85 FR 8104 |
49 CFR 195 |
API RP 1171, First Edition |
2015 |
Pipeline Safety: Safety of Underground Natural Gas Storage Facilities
|
American Petroleum Institute |
| Energy Department |
87 FR 65856 |
10 CFR 429 |
ANSI/ASHRAE 29-2015 (R2018) |
2015 |
Energy Conservation Program: Test Procedure for Automatic Commercial Ice Makers
|
American Society of Heating, Refrigerating and Air Conditioning Engineers |
| Transportation Department |
85 FR 8104 |
49 CFR 195 |
API RP 1170, First Edition |
2015 |
Pipeline Safety: Safety of Underground Natural Gas Storage Facilities
|
American Petroleum Institute |
| Homeland Security Department |
88 FR 16310 |
46 CFR 110 |
CSA-C22.2 No. 0-10 |
2015 |
Update to Electrical Engineering Regulations
|
Canadian Standards Association |
| Energy Department |
82 FR 59947 |
10 CFR 851 |
ASME BPVC.XII-2015 |
2015 |
Worker Safety and Health Program
|
American Society of Mechanical Engineers |
| Health and Human Services Department |
89 FR 51738 |
21 CFR 16 |
ISO 9000 |
2015 |
Current Good Manufacturing Practice, Certification, Postmarketing Safety Reporting, and Labeling Requirements for Certain Medical Gases
|
International Organization for Standardization |
| Environmental Protection Agency |
|
40 CFR 763 Appendix A (III)(L)(6) |
EPA Method 2A |
2015 |
Direct Measurement of Gas Volume through Pipes and Small Ducts, 40 CFR Part 60 Appendix A
|
U.S. Environmental Protection Agency |
| Environmental Protection Agency |
|
40 CFR 260.11(c)(2) |
EPA Method 1664 |
2015 |
n-Hexane Extractable Material (HEM; Oil and Grease) and Silica Gel Treated n-Hexane Extractable Material (SGT–HEM; Non-polar Material) by Extraction and Gravimetry, PB99–121949
|
U.S. Environmental Protection Agency |
| Transportation Department |
85 FR 27810 |
49 CFR 171 |
ISO 21172-1:2015(E) |
2015 |
Hazardous Materials: Harmonization With International Standards
|
International Organization for Standardization |
| Transportation Department |
89 FR 25434 |
49 CFR 173 |
OECD Test No. 439 |
2015 |
Hazardous Materials: Harmonization With International Standards
|
Organization for Economic Cooperation and Development |
| Nuclear Regulatory Commission |
87 FR 65128 |
10 CFR 50 |
ASME NQA-1-2015 |
2015 |
American Society of Mechanical Engineers 2019-2020 Code Editions
|
American Society of Mechanical Engineers |
| Environmental Protection Agency |
|
40 CFR 435.15 Note 9 |
EPA Method 1670 |
2015 |
Reverse Phase Extraction (RPE) Method for Detection of Oil Contamination in Non-Aqueous Drilling Fluids (NAF) (GC/MS)
|
U.S. Environmental Protection Agency |
| Environmental Protection Agency |
|
40 CFR 272.1351(c)(1) |
MTHWMP |
2015 |
Montana Statutes and Regulations for Approved State Hazardous Waste Management Programs
|
State of Montana |
| Transportation Department |
85 FR 27810 |
49 CFR 173 |
ISO 11623:2015(E) |
2015 |
Hazardous Materials: Harmonization With International Standards
|
International Organization for Standardization |
| Transportation Department |
89 FR 25434 |
49 CFR 171 |
ISO 11118:2015/Amd 1:2019 (E) |
2015 |
Hazardous Materials: Harmonization With International Standards
|
International Organization for Standardization |
| Environmental Protection Agency |
|
40 CFR 435.41(e) |
EPA Method 1647 |
2015 |
Protocol for the Determination of Degradation of Non Aqueous Base Fluids in a Marine Closed Bottle Biodegradation Test System: Modified ISO 11734:1995
|
U.S. Environmental Protection Agency |
| Energy Department |
86 FR 51230 |
10 CFR 431 |
IEEE C57.12.91-2011 |
2015 |
Energy Conservation Program: Test Procedure for Distribution Transformers
|
Institute of Electrical and Electronics Engineers |
| Homeland Security Department |
88 FR 16310 |
46 CFR 113 |
CAN/CSA-C22.2 NO. 0-10 (R2015) |
2015 |
Update to Electrical Engineering Regulations
|
Canadian Standards Association |
| Safety and Environmental Enforcement Bureau |
83 FR 49262 |
30 CFR 250.880(c)(4)(i) |
ANSI/API RP 14B |
2015 |
Design, Installation, Operation, Test, and Redress of Subsurface Safety Valve Systems
|
American Petroleum Institute |
| Environmental Protection Agency |
|
40 CFR 63, Subpart DDDDD, Table 6, 1(a) |
EPA Method 1631 |
2015 |
Mercury in Water by Oxidation, Purge and Trap, and Cold Vapor Atomic Fluorescence Spectrometry
|
U.S. Environmental Protection Agency |
| Environmental Protection Agency |
|
40 CFR 435.44 Note 2 |
EPA Method 1617 |
2015 |
Static Sheen Test
|
U.S. Environmental Protection Agency |
| Energy Department |
82 FR 59947 |
10 CFR 851 |
ASME BPVC.III.1.NH-2015 |
2015 |
Worker Safety and Health Program
|
American Society of Mechanical Engineers |
| Transportation Department |
89 FR 25434 |
49 CFR 175 |
ISO 21172–1:2015(E) |
2015 |
Hazardous Materials: Harmonization With International Standards
|
International Organization for Standardization |
| Environmental Protection Agency |
|
40 CFR 435.13 Note 11(a) |
EPA Method 1644 |
2015 |
Method for Conducting a Sediment Toxicity Test with Leptocheirus plumulosus and Non-Aqueous Drilling Fluids or Synthetic-Based Drilling Muds
|
U.S. Environmental Protection Agency |
| Energy Department |
82 FR 59947 |
10 CFR 851 |
ASME BPVC.CC.BPV-2015 |
2015 |
Worker Safety and Health Program
|
American Society of Mechanical Engineers |
| Environmental Protection Agency |
|
40 CFR 63.5935 Corrosion-resistant industry standard |
ASME RTP-1 |
2015 |
Reinforced Thermoset Plastic Corrosion-Resistant Equipment
|
American Society of Mechanical Engineers |
| Environmental Protection Agency |
|
40 CFR 268.40(b) |
EPA SW-846 |
2015 |
Test Methods for Evaluating Solid Waste, Physical/Chemical Methods
|
U.S. Environmental Protection Agency |
| Federal Communications Commission |
82 FR 50826 |
47 CFR 2.910(c)(3) |
ANSI C63.26-2015 |
2015 |
American National Standard of Procedures for Compliance Testing of Transmitters Used in Licensed Radio Services
|
American National Standards Institute |
| Health and Human Services Department |
86 FR 68728 |
21 CFR 1 |
ISO/IEC 17025:2017 |
2015 |
Laboratory Accreditation for Analyses of Foods
|
International Organization for Standardization |
| Homeland Security Department |
89 FR 50058 |
46 CFR 53 |
ASTM D323–15a |
2015 |
Updates to Marine Engineering Standards
|
ASTM International |
| Energy Department |
82 FR 59947 |
10 CFR 851 |
ANSI/ASSE Z88.2-2015 |
2015 |
Worker Safety and Health Program
|
American Society of Safety Engineers |
| Environmental Protection Agency |
|
40 CFR 63.6675 Backup power for renewable |
Alaska Statute 42.45.045 |
2015 |
Renewable energy grant fund and recommendation program
|
State of Alaska |
| Environmental Protection Agency |
|
40 CFR 82, Subpart B, Appendix A, SAE J-1990, Section 7.4.1.2 |
CGA S-1.1 |
2015 |
Pressure Relief Device Standard Part 1—Cylinders for Compressed Gases
|
Compressed Gas Association |
| Health and Human Services Department |
89 FR 51738 |
21 CFR 201 |
ISO 9000 |
2015 |
Current Good Manufacturing Practice, Certification, Postmarketing Safety Reporting, and Labeling Requirements for Certain Medical Gases
|
International Organization for Standardization |
| Environmental Protection Agency |
|
40 CFR 265.195(f)(2) Note |
API 1632 |
2015 |
Cathodic Protection of Underground Petroleum Storage Tanks and Piping Systems
|
American Petroleum Institute |
| Homeland Security Department |
89 FR 50058 |
46 CFR 53 |
ASTM A197/A197M–00(2015) |
2015 |
Updates to Marine Engineering Standards
|
ASTM International |