This database provides information on standards that have been incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation | CFR Citation | Document Number | Document Edition / Year Sort ascending | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Food and Drug Administration | 16 CFR 1203.53(b) | CSA D113.2-M | 1989 | Cycling Helmets | Canadian Standards Association | |
Coast Guard | 46 CFR 182.415(c)(1) | SAE J-1928 | 1989 | Devices Providing Backfire Flame Control for Gasoline Engines in Marine Applications | Society of Automotive Engineers | |
Environmental Protection Agency | 40 CFR 52.742(d) | 35 I.A.C. 215, Subpart Y | 1989 | Administrative Code, Sections 215.582, 215.583, and 215.584 | State of Illinois | |
Environmental Protection Agency | 40 CFR 147.500(a)(2) | FLUIC regulations | 1989 | Chapter 17-28, Underground Injection Control, Florida Administrative Code | State of Florida | |
Environmental Protection Agency | 40 CFR 76.15(a)(2) | ASTM D3172 | 1989 | Standard Practice for Proximate Analysis of Coal and Coke | ASTM International | |
Environmental Protection Agency | 40 CFR 63.772(h)(4)(iii)(B)(3) | ASTM D4891 | 1989 | Standard Test Method for Heating Value of Gases in Natural Gas Range by Stolchiometric Combustion | ASTM International | |
Energy Department | 10 CFR 434.402.1.2.1(a) | ASTM C236 | 1989 | Standard Test Method for Steady-State Thermal Performance of Building Assemblies by Means of a Guarded Hot Box (RS-7) | ASTM International | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (54) | USGS I-1750-85 | 1989 | Solids, residue on evaporation at 180 degrees C, dissolved, gravimetric | U.S. Geological Survey | |
Environmental Protection Agency | 40 CFR 59.401 Quick dry enamel (2) | ASTM D1640 | 1989 | Standard Test Method for Drying, Curing, or Film Formation of Organic Coatings at Room Temperature | ASTM International | |
Rural Utilities Service | 7 CFR 1755.870(a)(6) | ASTM D2633 | 1989 | Standard Methods of Testing Thermoplastic Insulations and Jackets for Wire and Cable | ASTM International | |
Environmental Protection Agency | 40 CFR 141.23(k)(1) Table Note 5 | USGS Publication | 1989 | Methods for the Determination of Organic Substances in Water and Fluvial Sediments, Techniques of Water-Resources Investigations of the U.S. Geological Survey, Book 5, Chapter A-1, 3rd Edition | U.S. Geological Survey | |
Coast Guard | 46 CFR 199.05(b) | IMO Resolution A.658(16) | 1989 | Use and Fitting of Retro-reflective Materials on Life-saving Appliances | International Maritime Organization | |
Environmental Protection Agency | 40 CFR 52.741(x)(1)(i) | 35 I.A.C. 215, Subpart Q | 1989 | Administrative Code | State of Illinois | |
Energy Department | 10 CFR 430.3(c)(3) | ANSI C78.21 | 1989 | Electric Lamps--PAR and R Shapes | American National Standards Institute | |
Environmental Protection Agency | 40 CFR 52.741(s)(1)(i)(A) | 35 I.A.C. 215, Subpart Y | 1989 | Administrative Code | State of Illinois | |
Environmental Protection Agency | 40 CFR 60, Appendix A-7, Method 19, Section 12.3.2.3 | ASTM D3176 | 1989 | Standard Practice for Ultimate Analysis of Coal and Coke | ASTM International | |
Environmental Protection Agency | 40 CFR 444.12(b)(1) Table (1) | USGS I-3062-85 | 1989 | Arsenic by Gaseous Hydride Atomic Absorption | U.S. Geological Survey | |
Environmental Protection Agency | 40 CFR 60.41b Pulverized coal-fired steam generating unit (Residual oil) | ASTM D396 | 1989 | Standard Specification for Fuel Oils | ASTM International | |
Rural Utilities Service | 7 CFR 1755.860(c)(3) | ASTM D1535 | 1989 | Specifying Color by the Munsell System | ASTM International | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IA | USGS B-0055-85 | 1989 | Membrane Filtration Quantitative: Fecal Streptococci | U.S. Geological Survey | |
Food and Drug Administration | 21 CFR 177.1810(c)(2)(ii) | FDA Publication | 1989 | Direct Reading Viscoelastometric Method for Determining Class Transition Points of Styrene Block Polymers | Food and Drug Administration, U.S. Department of Health and Human Services | |
Rural Utilities Service | 7 CFR 1755.910(e)(3)(iv) | ASTM D822 | 1989 | Standard Practice for Conducting Tests on Paint and Related Coatings and Materials Using Filtered Open-Flame Carbon-Arc Light and Water Exposure Apparatus | ASTM International | |
Housing and Urban Development Department | 24 CFR 3280.305(j)(1) | AISC S335 | 1989 | Specification for Structural Steel Buildings--Allowable Stress Design and Plastic Design | American Institute of Steel Construction | |
Environmental Protection Agency | 40 CFR 147.300(a)(3) | COUIC regulations | 1989 | Rules and Regulations, Rules of Practice and Procedure, and Oil and Gas Conservation Act (As Amended) Department of Natural Resources, Oil and Gas Conservation Commission of the State of Colorado | State of Colorado | |
Mine Safety and Health Administration | 30 CFR 56.14130(j) | SAE J-1194 | 1989 | Roll-Over Protective Structures for Wheeled Agricultural Tractors | Society of Automotive Engineers | |
Environmental Protection Agency | 40 CFR 761.19(a)(11) | ASTM D2158 | 1989 | Standard Test Method for Residues in Liquefied Petroleum (LP) Gases | ASTM International | |
Food and Drug Administration | 21 CFR 177.1380(a)(4) | ASTM D3275 | 1989 | Standard Specification for E-CTFE-Flouroplastic Molding Extrusion and Coating Materials | ASTM International | |
Coast Guard | 46 CFR 160.135-5(d)(1) | IMO Resolution A.658(16) | 1989 | Use and Fitting of Retro-Reflective Materials on Life-Saving Appliances | International Maritime Organization | |
Environmental Protection Agency | 40 CFR 60.17(g)(120) | ASTM D3176 | 1989 | Standard Method for Ultimate Analysis of Coal and Coke | ASTM International | |
Coast Guard | 46 CFR 57.02-4(a) | ASME B&PV Code | 1989 | Boiler & Pressure Vessel Code, Section IX, Welding and Brazing Qualifications | American Society of Mechanical Engineers | |
Rural Utilities Service | 7 CFR 1755.860(j)(3)(i) | ASTM D1248 | 1989 | Standard Specification for Polyethylene Plastics Molding and Extrusion Materials | ASTM International | |
Environmental Protection Agency | 40 CFR 141.21(f)(3) Note 8 | ONPG-MUG Test | 1989 | Autoanalysis Colilert System | U.S. Environmental Protection Agency | |
Food and Drug Administration | 21 CFR 177.2450(b)(3) | FDA Publication | 1989 | Amide-Imide Polymer Content--Analysis of Monomer Content | Food and Drug Administration, U.S. Department of Health and Human Services | |
Food and Drug Administration | 21 CFR 184.1472(a)(2)(iii) | AOCS Method Cd 3-25 | 1989 | Saponification Value | American Oil Chemists Society | |
Housing and Urban Development Department | 24 CFR 200, Appendix A | ANSI/BHMA A156.2 | 1989 | Standard for Bored and Preassembled Locks and Latches | American National Standards Institute | |
Environmental Protection Agency | 40 CFR 147.1050(a)(3) | MDUIC regulations | 1989 | Code of Maryland Regulations, Title 26, Subtitle 08, Chapter 02, promulgated and effective as of March 1, 1989 | State of Maryland | |
Housing and Urban Development Department | 24 CFR 200, Appendix A | ANSI/AAMA 1102.7 | 1989 | Voluntary Specifications for Aluminum Storm Doors | American National Standards Institute | |
Coast Guard | 46 CFR 56.60-25(b)(6) | SAE J-1942 | 1989 | Hose and Hose Assemblies for Marine Applications | Society of Automotive Engineers | |
Environmental Protection Agency | 40 CFR 265.1084(c)(3)(ii)(B) | API 2517 | 1989 | Evaporation Loss From External Floating-Roof Tanks | American Petroleum Institute | |
Environmental Protection Agency | 40 CFR 266, Appendix IX, 4.0 | EPA-625-3-89-016 | 1989 | Interim Procedures for Estimating Risks Associated with Exposures to Mixtures of Chlorinated Dibenzo-p-Dioxins and Dibenzofurans (CDDs and CDFs) | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 52.741(e)(3)(ii)(A) | 35 I.A.C. 215, Subpart V | 1989 | Administrative Code | State of Illinois | |
Environmental Protection Agency | 40 CFR 52.741(a)(2)(ii)(A) | 35 I.A.C. 218 | 1989 | Organic Material Emission Standards and Limitations for the Chicago Area | State of Illinois | |
Coast Guard | 46 CFR 125.180(b) | ANSI B31.1 | 1989 | Code for Pressure Piping, Power Piping | American National Standards Institute | |
Research and Special Programs Administration | 21 CFR 177.1050(e)(4) | FDA Publication | 1989 | Gas-Solid Chromatographic Procedure for Determining Acrylonitrile Monomer in Acrylonitrile-Containing Polymers and Food Simulating Solvents | Food and Drug Administration, U.S. Department of Health and Human Services | |
Coast Guard | 46 CFR 160.151-5(d)(1) | IMO Resolution A.657(16) | 1989 | Instructions for Action in Survival Craft | International Maritime Organization | |
Rural Utilities Service | 7 CFR 1755.522(n)(2) | IEEE 730 | 1989 | Standard for Software Quality Assurance Plans | Institute of Electrical and Electronics Engineers | |
Environmental Protection Agency | 40 CFR 61, Appendix B, Method 114, 5(24) | EPA-520-1-89-009 | 1989 | Indoor Radon and Radon Decay Product Measurement Protocols | U.S. Environmental Protection Agency | |
Federal Aviation Administration | 14 CFR 135.168(F)(2)(i) | RTCA DO-204 | 1989 | Minimum Operational Performance Standards (MOPS) 406 MHz Emergency Locator Transmitters (ELTs) | Radio Technical Commission for Aeronautics | |
Occupational Safety and Health Administration | 29 CFR 1915.5(d)(1)(viii) | ANSI Z87.1 | 1989 | Practice for Occupational and Educational Eye and Face Protection | American National Standards Institute | |
National Highway Traffic Safety Administration | 40 CFR 136.3(a) Table IB (12) | USGS I-4138-89 | 1989 | Cadmium by Graphite Furnace Atomic Absorption | U.S. Geological Survey |