This database provides information on standards that have been incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation | CFR Citation | Document Number | Document Edition / Year Sort ascending | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Energy Department | 10 CFR 430.3(k)(4) | IES LM-20 | 1994 | Method for Photometric Testing of Reflector-Type Lamps | Illuminating Engineering Society of North America | |
Environmental Protection Agency | 88 FR 4296 | 40 CFR 1027 | SAE J2071_199406 | 1994 | Control of Air Pollution From New Motor Vehicles: Heavy-Duty Engine and Vehicle Standards | SAE International |
Federal Communications Commission | 47 CFR 15.120(d)(1) | EIA-608 | 1994 | Recommended Practice for Line 21 Data Service | Electronic Industries Association | |
Environmental Protection Agency | 40 CFR 141.23(k)(1) Table (7) Cadmium | EPA Method 200.9 | 1994 | Metals by Graphite Atomic Absorption | U.S. Environmental Protection Agency | |
Energy Department | 10 CFR 430.2, Definitions, R20 incandescent reflector lamp | ANSI C79.1 | 1994 | Nomenclature for Glass Bulbs Intended for Use with Electric Lamps | American National Standards Institute | |
Environmental Protection Agency | 40 CFR 141.23(k)(1) Table (24) Sodium | EPA Method 200.7 | 1994 | ICP - metals, Revision 4.4 | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 63.782, Nuclear specialty coating | ASTM D4256 | 1994 | Standard Test Method for Determination of the Decontaminability of Coatings Used in Light-Water Nuclear Power Plants | ASTM International | |
Environmental Protection Agency | 40 CFR 444.12(b)(1) Table (4) | EPA Method 200.7 | 1994 | Inductively Coupled Plasma Atomic Emission Spectrometric Method for Trace Element Analysis of Water and Wastes | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 444.12(b)(1) Table Note (17) | EPA Method 200.8 | 1994 | Determination of Trace Elements in Water and Wastes by Inductively Coupled Plasma-Mass Spectrometry | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 141.24(e)(1) Table (2,3,7,8-TCDD (dioxin)) | EPA Method 1613 | 1994 | Tetra-through-Octa-Chlorinated Dioxins and Furans by Isotope Dilution HRGC/HRMS | U.S. Environmental Protection Agency | |
Coast Guard | 46 CFR 56.01-2(e)(83) | ASTM F1548 | 1994 | Performance of Fittings for Use with Gasketed Mechanical Couplings Used in Piping Applications | ASTM International | |
Environmental Protection Agency | 40 CFR 63, Subpart JJJJJJ, Table 5, (1)(f) | EPA SW-846-7470A | 1994 | Mercury In Liquid Waste (Manual Cold-Vapor Technique), Revision 1 | U.S. Environmental Protection Agency | |
Coast Guard | 46 CFR 134.150(a) | ABS Publication | 1994 | Rules for Building and Classing Mobile Offshore Drilling Units | American Bureau of Shipping | |
Transportation Department | 89 FR 15636 | 49 CFR 107 | CGA C-12 | 1994 | Hazardous Materials: Adoption of Miscellaneous Petitions and Updating Regulatory Requirements | Compressed Gas Association |
Energy Department | 10 CFR 430 Subpart B, App. P, 4.1 | ANSI Z21.56 | 1994 | Gas-Fired Pool Heaters | American National Standards Institute | |
Housing and Urban Development Department | 24 CFR 200.935(d)(4)(ii)(A)(4) | ASQ Q9003 | 1994 | Quality Systems - Model for Quality Assurance in Final Inspection and Test | American Society for Quality Control | |
National Highway Traffic Safety Administration | 49 CFR 572.124(a) | Drawing No. 127-2000 | 1994 | Upper Torso Assembly | Reprographic Technologies | |
National Highway Traffic Safety Administration | 49 CFR 572.146(i) | Drawing No. SA-572-S22 | 1994 | Acetabulum force transducers | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
National Highway Traffic Safety Administration | 49 CFR 572.177(b)(7) | Drawing No. SA-572-S13R | 1994 | Iliac spine force transducers | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Environmental Protection Agency | 40 CFR 136.3(b)(32)(i) | 3M Test Method 0222 | 1994 | Organochlorine Pesticides and PCBs in Wastewater Using Empore Disk | 3M Corporation | |
Environmental Protection Agency | 40 CFR 141.23(k)(1) Table Note 7 | ATI Technical Bulletin 601 | 1994 | Standard Method of Test for Nitrate in Drinking Water | Analytical Technology, Inc | |
Occupational Safety and Health Administration | 29 CFR 1926.6(x)(2) | ISO 11660-2:1994(E) | 1994 | Cranes—Access, guards and restraints—Part 2: Mobile cranes | International Organization for Standardization | |
Environmental Protection Agency | 40 CFR 136.3(b)(27)(iv) | OIA Method PAI-DK03 | 1994 | Nitrogen, Total Kjeldahl, Block Digestion, Automated FIA Gas Diffusion | OI Analytical | |
National Highway Traffic Safety Administration | 49 CFR 572.41(a)(3) | Drawing No. SA-SID-M030 | 1994 | Thorax Assembly | Reprographic Technologies | |
Coast Guard | 33 CFR 127.003(b) | NFPA 51B | 1994 | Standard for Fire Prevention in Use of Cutting and Welding Processes | National Fire Protection Association | |
National Highway Traffic Safety Administration | 49 CFR 572.36(f) | Drawing No. 78051-317 | 1994 | Chest deflection transducer assembly | General Motors Corporation | |
Environmental Protection Agency | 40 CFR 141.23(k)(1) Table (4) Asbestos | EPA Method 100.2 | 1994 | Determination of Asbestos Structure Over 10-?m In Length In Drinking Water, EPA-600-R-94-134 | U.S. Environmental Protection Agency | |
Coast Guard | 46 CFR 30.10-22(c)(Note 1) | ASTM D323 | 1994 | Standard Test Method for Vapor Pressure of Petroleum Products (Reid Method) | ASTM International | |
Environmental Protection Agency | 40 CFR 444.12(b)(1) | EPA Method 200.8 | 1994 | Determination of Trace Elements in Water and Wastes by Inductively Coupled Plasma-Mass Spectrometry | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 444.12(b)(1) Table (9) | EPA Method 200.7 | 1994 | Inductively Coupled Plasma Atomic Emission Spectrometric Method for Trace Element Analysis of Water and Wastes | U.S. Environmental Protection Agency | |
Coast Guard | 46 CFR 111.60-3(b)(3) | MIL-C-24643A | 1994 | Military Specification Cables and Cords, Electric, Low Smoke, for Shipboard Use, General Specification for (1996) Amendment 2 | U.S. Department of Defense | |
Research and Special Programs Administration | 49 CFR 178.47(d) | CGA C-3 | 1994 | Standard for Welding and Brazing on Thinned Walled Containers | Compressed Gas Association | |
Federal Communications Commission | 88 FR 67108 | 47 CFR 68 | EIA-608 | 1994 | Updating References to Standards Related to the Commission's Equipment Authorization Program | Consumer Technology Association |
National Highway Traffic Safety Administration | 49 CFR 572.9(a) | Drawing No. SA 150 M060 | 1994 | Pelvis and Abdomen Assembly | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IG (Organo-tin pesticides) | EPA Method 200.7 | 1994 | ICP - metals, Revision 4.4 | U.S. Environmental Protection Agency | |
Research and Special Programs Administration | 49 CFR 195.264(b)(1) | API 12F | 1994 | Specification for Shop Welded Tanks for Storage of Production Liquids | American Petroleum Institute | |
Environmental Protection Agency | 88 FR 4296 | 40 CFR 1031 | SAE J2071_199406 | 1994 | Control of Air Pollution From New Motor Vehicles: Heavy-Duty Engine and Vehicle Standards | SAE International |
Housing and Urban Development Department | 24 CFR 3280.703 | UL 181A | 1994 | Standard for Safety Closure Systems for use with Rigid Air Ducts and Air Connectors with 1998 revisions | Underwriters Laboratories, Inc. | |
Housing and Urban Development Department | 24 CFR 200.926d(d)(2) | HUD Handbook 4910.1 | 1994 | Minimum Property Standards for Housing | U.S. Department of Housing and Urban Development | |
Coast Guard | 33 CFR 155.235 | IMO Resolution MSC.35 (63) | 1994 | Adoption of Guidelines for Emergency Towing Arrangement on Tankers | International Maritime Organization | |
National Highway Traffic Safety Administration | 49 CFR 572.114 | Drawing No. SA-SID-M001A | 1994 | Completed Assembly Side Impact Dummy | Reprographic Technologies | |
Coast Guard | 46 CFR 161.002-4(b)(1) | UL 268 | 1994 | Smoke Detectors for Fire Protective Signaling Systems | Underwriters Laboratories, Inc. | |
Environmental Protection Agency | 40 CFR 60.107a(d)(7)(ii) | ASTM D1826 | 1994 | Standard Test Method for Calorific Value of Gases in Natural Gas Range by Continuous Recording Calorimeter | ASTM International | |
Coast Guard | 21 CFR 165.110(b)(4)(iii)(E)(14)(i) | EPA-600-4-91-010 | 1994 | Method 200.8--Determination of Trace Elements in Waters and Wastes by Inductively Coupled Plasma-Mass Spectrometry | U.S. Environmental Protection Agency | |
Research and Special Programs Administration | 49 CFR 178.58(d)(1) | CGA C-3 | 1994 | Standard for Welding and Brazing on Thinned Walled Containers | Compressed Gas Association | |
Coast Guard | 46 CFR 121.240(h) | NFPA 302 | 1994 | Fire Protection Standard for Pleasure and Commercial Motor Craft | National Fire Protection Association | |
National Highway Traffic Safety Administration | 49 CFR 572.77(a)(2)(ii) | Drawing No. SA-572-S2 | 1994 | Type B accelerometer | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
National Highway Traffic Safety Administration | 49 CFR 572.130(a)(5) | SAE J-1733 | 1994 | Sign Convention for Vehicle Crash Testing | Society of Automotive Engineers | |
National Highway Traffic Safety Administration | 49 CFR 572.146(c) | Drawing No. ATD 6204 | 1994 | No title given | Reprographic Technologies | |
Research and Special Programs Administration | 49 CFR 171.7(a)(3) | ASTM A370 | 1994 | Standard Test Method and Definitions for Mechanical Testing of Steel Products | ASTM International |