This database provides information on standards that have been incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation | CFR Citation | Document Number | Document Edition / Year Sort ascending | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Environmental Protection Agency | 40 CFR 63.14(g)(36) | ASTM D3370 | 1995 | Standard Practices for Sampling Water from Closed Conduits | ASTM International | |
Environmental Protection Agency | 40 CFR 63.14(l)(17) | EPA SW-846-9076 | 1994 | Test Method for Total Chlorine in New and Used Petroleum Products by Oxidative Combustion and Microcoulometry, Revision 0 | U.S. Environmental Protection Agency | |
Research and Special Programs Administration | 49 CFR 179.102-4(a)(2)(ii) | ASTM A370 | 1994 | Standard Test Method and Definitions for Mechanical Testing of Steel Products | ASTM International | |
Environmental Protection Agency | 40 CFR 75, Appendix F, Section 5.5.2 | ASTM D1826 | 1994 | Standard Test Method for Calorific (Heating) Value of Gases in Natural Gas Range by Continuous Recording Calorimeter | ASTM International | |
Energy Department | 10 CFR 430 Subpart B, App. P, 2 | ANSI Z21.56 | 1994 | Gas-Fired Pool Heaters | American National Standards Institute | |
Coast Guard | 46 CFR 110.10-1(o)(11) | UL 1042 | 1994 | Electric Baseboard Heating Equipment | Underwriters Laboratories, Inc. | |
Environmental Protection Agency | 40 CFR 60.1185(a) | ASME QRO-1 | 1994 | Standard for the Qualification and Certification of Resource Recovery Facility Operators | American Society of Mechanical Engineers | |
Environmental Protection Agency | 40 CFR 58 Appendix D, 6.0(9) | EPA-454-B-93-051 | 1994 | Photochemical Assessment Monitoring Stations Implementation Manual | U.S. Environmental Protection Agency | |
National Highway Traffic Safety Administration | 49 CFR 572.127(f) | Drawing No. SA-572-S50 | 1994 | Chest deflection transducer | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Environmental Protection Agency | 40 CFR 243.200-1(e)(1) | ANSI Z245.30 | 1994 | Waste Containers—Safety Requirements | American National Standards Institute | |
Housing and Urban Development Department | 24 CFR 3280.604(b)(2) | ANSI Z124.9 | 1994 | Plastic Urinal Fixtures | American National Standards Institute | |
National Highway Traffic Safety Administration | 49 CFR 572.180(a)(5) | SAE J-1733 | 1994 | Sign Convention for Vehicle Crash Testing | Society of Automotive Engineers | |
Environmental Protection Agency | 40 CFR 1048.810(c)(1) | ISO 9141-2 | 1994 | Road vehicles-Diagnostic systems—Part 2: CARB requirements for interchange of digital information | International Organization for Standardization | |
Environmental Protection Agency | 40 CFR 444.12(b)(1) Table (11) | EPA Method 200.8 | 1994 | Determination of Trace Elements in Water and Wastes by Inductively Coupled Plasma-Mass Spectrometry | U.S. Environmental Protection Agency | |
Coast Guard | 33 CFR 126.5(b) | NFPA 51B | 1994 | Standard for Fire Prevention in Use of Cutting and Welding Processes | National Fire Protection Association | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (30) | EPA Method 200.7 | 1994 | ICP - metals, Revision 4.4 | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 88 FR 4296 | 40 CFR 1027 | SAE J2071_199406 | 1994 | Control of Air Pollution From New Motor Vehicles: Heavy-Duty Engine and Vehicle Standards | SAE International |
Environmental Protection Agency | 40 CFR 233.71(b)(1) | NJOD regulations | 1994 | New Jersey Statutory Requirements Applicable to the Freshwater Wetlands Program | State of New Jersey | |
Environmental Protection Agency | 40 CFR 141.23(k)(1) Table Note 3 | Annual Book of Standards | 1994 | Annual Book of ASTM Standards | ASTM International | |
Environmental Protection Agency | 40 CFR 141.23(k)(1) Table (7) Cadmium | EPA Method 200.9 | 1994 | Metals by Graphite Atomic Absorption | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 136.3(b)(27)(iii) | OIA Method PAI-DK02 | 1994 | Nitrogen, Total Kjeldahl, Block Digestion, Steam Distillation, Colorimetric Detection | OI Analytical | |
Environmental Protection Agency | 40 CFR 141.23(k)(1) Table (24) Sodium | EPA Method 200.7 | 1994 | ICP - metals, Revision 4.4 | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 444.12(b)(1) Table (4) | EPA Method 200.7 | 1994 | Inductively Coupled Plasma Atomic Emission Spectrometric Method for Trace Element Analysis of Water and Wastes | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 60.17(g)(102) | ASTM D2597 | 1994 | Standard Test Method for Analysis of Demethanized Hydrocarbon Liquid Mixtures Containing Nitrogen and Carbon Dioxide by Gas Chromatography | ASTM International | |
Environmental Protection Agency | 40 CFR 444.12(b)(1) Table Note (17) | EPA Method 200.8 | 1994 | Determination of Trace Elements in Water and Wastes by Inductively Coupled Plasma-Mass Spectrometry | U.S. Environmental Protection Agency | |
National Highway Traffic Safety Administration | 49 CFR 572.144(b)(1) | Drawing No. SA-572-S50 | 1994 | Chest Deflection Transducer | Reprographic Technologies | |
Environmental Protection Agency | 40 CFR 141.24(e)(1) Table (2,3,7,8-TCDD (dioxin)) | EPA Method 1613 | 1994 | Tetra-through-Octa-Chlorinated Dioxins and Furans by Isotope Dilution HRGC/HRMS | U.S. Environmental Protection Agency | |
Energy Department | 10 CFR 434.401.2.1 Table 401.2.1 | NEMA MG-10 | 1994 | Energy Management Guide for Selection and Use of Polyphase Motors (RS-43) | National Electrical Manufacturers Association | |
Coast Guard | 46 CFR 56.01-2(d)(19) | ASME B16.28 | 1994 | Wrought Steel Buttwelding Short Radius Elbows and Returns | American Society of Mechanical Engineers | |
Environmental Protection Agency | 40 CFR 63, Subpart JJJJJJ, Table 5, (1)(f) | EPA SW-846-7470A | 1994 | Mercury In Liquid Waste (Manual Cold-Vapor Technique), Revision 1 | U.S. Environmental Protection Agency | |
Coast Guard | 46 CFR 134.150(a) | ABS Publication | 1994 | Rules for Building and Classing Mobile Offshore Drilling Units | American Bureau of Shipping | |
Transportation Department | 89 FR 15636 | 49 CFR 107 | CGA C-12 | 1994 | Hazardous Materials: Adoption of Miscellaneous Petitions and Updating Regulatory Requirements | Compressed Gas Association |
Coast Guard | 33 CFR 96.430(a)(2)(ii) | ASQ Q9001 | 1994 | Quality Assurance in Design, Development, Production, Installation, and Servicing | American Society for Quality Control | |
Environmental Protection Agency | 40 CFR 136.3(b)(3)(ii)(E) | EPA Method 245.1 | 1994 | Determination of Mercury in Water by Cold Vapor Atomic Absorption Spectrometry. Revision 3.0 | U.S. Environmental Protection Agency | |
National Archives and Records Administration | 36 CFR 1234, Appendix B, 2.m | NFPA 10 | 1994 | Standard for Portable Fire Extinguishers | National Fire Protection Association | |
Environmental Protection Agency | 40 CFR 60.296(b)(3) | ASTM D1826 | 1994 | Standard Test Method for Calorific Value of Gases in Natural Gas Range by Continuous Recording Calorimeter | ASTM International | |
National Highway Traffic Safety Administration | 49 CFR 572.123(c)(2) | Drawing No. 127-1016 | 1994 | Neck cable | Reprographic Technologies | |
National Highway Traffic Safety Administration | 49 CFR 572.146(i) | Drawing No. 210-4522 | 1994 | No title given | Reprographic Technologies | |
Environmental Protection Agency | 40 CFR 141.23(k)(1) Table (2) Antimony | EPA Method 200.9 | 1994 | Metals by Graphite Atomic Absorption | U.S. Environmental Protection Agency | |
Coast Guard | 46 CFR 28.330(b) | NFPA 17A | 1994 | Standard for Wet Chemical Extinguishing Systems | National Fire Protection Association | |
National Highway Traffic Safety Administration | 49 CFR 572.177(b)(7) | Drawing No. SA-572-S13L | 1994 | Iliac spine force transducers | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Environmental Protection Agency | 40 CFR 282.66(d)(1)(i)(B) | KSUSTP | 1994 | Kansas Regulatory Requirements Applicable to the Underground Storage Tank Program | State of Kansas | |
Coast Guard | 46 CFR 114.400(b), Char length | NFPA 261 | 1994 | Test for Determining Resistance of Mock-up Upholstered Furniture Material Assemblies to Ignition by Smoldering Cigarettes | National Fire Protection Association | |
Environmental Protection Agency | 40 CFR 136.3(a) Table ID Footnote 8 | 3M Test Method 0222 | 1994 | Organochlorine Pesticides and PCBs in Wastewater Using Empore Disk | 3M Corporation | |
Environmental Protection Agency | 40 CFR 63, Subpart DDDDD, Table 6, 2(f) | EPA SW-846-5050 | 1994 | Bomb Preparation Method for Solid Waste, Revision 0 | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 141.131(a)(2) | APHA Method 6251 B | 1994 | Standard Methods for the Examination of Water and Wastewater | American Public Health Association | |
Minerals Management Service | 30 CFR 250.1202(b)(4)(i) | API MPMS | 1994 | Manual of Petroleum Measurement Standards | American Petroleum Institute | |
National Highway Traffic Safety Administration | 49 CFR 572.150(a)(4) | SAE J-1733 | 1994 | Sign Convention for Vehicle Crash Testing | Society of Automotive Engineers | |
Coast Guard | 46 CFR 116.422(b)(2) | UL 723 | 1994 | Surface Burning Characteristics of Building Materials | Underwriters Laboratories, Inc. | |
National Highway Traffic Safety Administration | 49 CFR 572.36(f) | Drawing No. 78051-342 | 1994 | Title not specified | General Motors Corporation |