| Environmental Protection Agency |
|
40 CFR 796.1950(b)(2)(i) |
ASTM D2879 |
1986 |
Standard Test Method for Vapor Pressure--Temperature Relationship and Initial Decomposition Temperature of Liquids by Isoteniscope
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 60, Appendix A-8, Method 29, Section 18.0, Table 29-3 |
EPA Method 7060 |
1986 |
Test Methods for Evaluating Solid Waste, Physical/Chemical Methods, SW-846 Third Edition
|
U.S. Environmental Protection Agency |
| Environmental Protection Agency |
|
40 CFR 60.105(b)(1)(iv) |
GPA 2377 |
1986 |
Test for Hydrogen Sulfide and Carbon Dioxide in Natural Gas Using Length of Stain Tubes
|
Gas Processors Association |
| Environmental Protection Agency |
|
40 CFR 98.354(h)(2) |
ASME MFC-4M |
1986 |
Measurement of Gas Flow by Turbine Meters
|
American Society of Mechanical Engineers |
| Energy Department |
|
10 CFR 431.96 (g)(2) |
ANSI/ASHRAE 58 |
1986 |
Method of Testing for Rating Room Air-Conditioner and Packaged Terminal Air-Conditioner Heating Capacity
|
American Society of Heating, Refrigerating and Air Conditioning Engineers |
| Environmental Protection Agency |
|
40 CFR 60, Appendix A-8, Method 29, Section 11.1.1 |
EPA Method 6010 |
1986 |
Test Methods for Evaluating Solid Waste, Physical/Chemical Methods, SW-846 Third Edition
|
U.S. Environmental Protection Agency |
| Housing and Urban Development Department |
|
24 CFR 200, Appendix A |
ASTM E331 |
1986 |
Standard Test Method for Water Penetration of Exterior Windows, Curtain Walls, and Doors by Uniform Static Air Pressure Difference
|
ASTM International |
| Federal Aviation Administration |
|
14 CFR 97.20(b) |
FAA Form 8260-4 |
1986 |
Standard instrument approach procedures and associated supporting data
|
Federal Aviation Administration, U.S. Department of Transportation |
| Environmental Protection Agency |
|
40 CFR 266, Appendix IX, 5.0 |
EPA-450-2-78-027R |
1986 |
Guidance on Air Quality Models (Revised)
|
U.S. Environmental Protection Agency |
| Environmental Protection Agency |
|
40 CFR 61.18(d)(1) |
EPA SW-846 |
1986 |
Test Methods for Evaluating Solid Waste, Physical/Chemical Methods, Third Edition, as amended by Revision I, December 1987
|
U.S. Environmental Protection Agency |
| Mine Safety and Health Administration |
|
30 CFR 57.14130(j) |
SAE J-1040 |
1986 |
Performance Criteria for Rollover Protective Structures (ROPS) for Construction, Earthmoving, Forestry and Mining Machines
|
Society of Automotive Engineers |
| Occupational Safety and Health Administration |
|
29 CFR 1910.6(b)(2) |
ACGIH Publication |
1986 |
Threshold Limit Values and Biological Exposure Indices for 1986-1987
|
American Conference of Governmental Industrial Hygienists |
| Research and Special Programs Administration |
|
49 CFR 171.7(a)(3) |
ISO 8115 |
1986 |
Cotton Bale--Dimensions and Density
|
International Organization for Standardization |
| Housing and Urban Development Department |
|
24 CFR 100.201a(b)(4) |
ANSI A117.1 |
1986 |
American National Standard for Buildings and Facilities: Providing Accessibility and Usability for Physically Handicapped People
|
American National Standards Institute |
| Environmental Protection Agency |
|
40 CFR 63.404(a) |
EPA SW-846 |
1986 |
Test Methods for Evaluating Solid Waste, Physical/Chemical Methods
|
U.S. Environmental Protection Agency |
| Environmental Protection Agency |
|
40 CFR 60, Appendix A-8, Method 29, Section 18.0, Table 29-3 |
EPA Method 7080 |
1986 |
Test Methods for Evaluating Solid Waste, Physical/Chemical Methods, SW-846 Third Edition
|
U.S. Environmental Protection Agency |
| Environmental Protection Agency |
|
40 CFR 60, Appendix B, PS-1, 16.0(4) |
EPA-340-1-86-009a |
1986 |
Evaluation of Opacity CEMS Reliability and Quality Assurance Procedures. Volume 1
|
U.S. Environmental Protection Agency |
| Environmental Protection Agency |
|
40 CFR 61.18(d)(1)(iii) |
EPA Method 8240 |
1986 |
Gas Chromatography/Mass Spectrometry for Volatile Organics
|
U.S. Environmental Protection Agency |
| Environmental Protection Agency |
|
40 CFR 300.915(f)(9) |
ASTM D1310 |
1986 |
Standard Test Method for Flash Point and Fire Point of Liquids by Tag Open-Cup Apparatus
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 60, Appendix A-8, Method 29, Section 18.0, Table 29-3 |
EPA Method 7090 |
1986 |
Test Methods for Evaluating Solid Waste, Physical/Chemical Methods, SW-846 Third Edition
|
U.S. Environmental Protection Agency |
| Environmental Protection Agency |
|
40 CFR 60.17(j)(3) |
GPA 2377 |
1986 |
Test for Hydrogen Sulfide and Carbon Dioxide in Natural Gas Using Length of Stain Tubes
|
Gas Processors Association |
| Housing and Urban Development Department |
|
24 CFR 200, Appendix A |
ANSI/NWWDA I.S. 6 |
1986 |
Industry Standard for Wood Stile and Rail Doors
|
National Wood Window and Door Association |
| Environmental Protection Agency |
|
40 CFR 60.17(f)(3) |
ASME MFC-4M |
1986 |
Measurement of Gas Flow by Turbine Meters
|
American Society of Mechanical Engineers |
| Coast Guard |
|
46 CFR 28.40(b) |
NFPA 17A |
1986 |
Wet Chemical Extinguishing Systems
|
National Fire Protection Association |
| Environmental Protection Agency |
85 FR 40594 |
40 CFR 63 |
SW-846 Test Methods 0010 |
1986 |
Modernizing Ignitable Liquids Determinations
|
U.S. Environmental Protection Agency |
| Environmental Protection Agency |
85 FR 40594 |
40 CFR 260 |
SW- 846 Method 1020C |
1986 |
Modernizing Ignitable Liquids Determinations
|
U.S. Environmental Protection Agency |
| Housing and Urban Development Department |
|
24 CFR 200, Appendix A |
WQA S-400 |
1986 |
Point-of-Use Distillation Drinking Water Systems
|
Water Quality Association |
| Transportation Department |
87 FR 79752 |
49 CFR 178 |
ISO 4706:2008(E) |
1986 |
Hazardous Materials: Editorial Corrections and Clarifications
|
International Organization for Standardization |
| Pipeline and Hazardous Materials Safety Administration |
|
49 CFR 171.7(a)(3) |
CGA G-4.1 |
1985 |
Cleaning Equipment for Oxygen Service
|
Compressed Gas Association |
| Environmental Protection Agency |
|
40 CFR 795.232(c)(1)(iii) |
NIH Publication No. 86-23 |
1985 |
Guidelines for the Care and Use of Laboratory Animals
|
U.S. Public Health Service, U.S. Department of Health and Human Services |
| Energy Department |
|
10 CFR 440 Appendix A |
FedSpec HH-I-1972/2 |
1985 |
Polyurethane or Polyisocyanurate Insulation Board Faced with Felt on Both Sides
|
Federal Specifications Standards and Test Methods |
| Coast Guard |
|
46 CFR 28.40(b) |
ABYC E-8 |
1985 |
Alternating Current (AC) Electrical Systems on Boats
|
American Boat and Yacht Council |
| Environmental Protection Agency |
|
40 CFR 60.107a(d)(6)(ii) |
ASME MFC-5M |
1985 |
Measurement of Liquid Flow in Closed Conduits Using Transit-Time Ultrasonic Flowmeters
|
American Society of Mechanical Engineers |
| Environmental Protection Agency |
|
40 CFR 260.11(b)(9) |
ASTM E260 |
1985 |
Standard Practice for Packed Column Gas Chromatography
|
ASTM International |
| Pipeline and Hazardous Materials Safety Administration |
|
49 CFR 571.5(d)(1) |
Annual Book of Standards |
1985 |
Vol. 05.04, Test Methods for Rating Motor, Diesel, Aviation Fuels, A2. Reference Materials and Blending Accessories, A2.3.2, A2.3.3, and A2.7
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 136.3(a) Table IB (50) |
USGS I-4600-85 |
1985 |
Phosphorus, total, colorimetric, phosphomolybdate, automated-segmented flow
|
U.S. Geological Survey |
| Transportation Department |
89 FR 15636 |
49 CFR 171 |
CGA G-2.2 |
1985 |
Hazardous Materials: Adoption of Miscellaneous Petitions and Updating Regulatory Requirements
|
Compressed Gas Association |
| Environmental Protection Agency |
|
40 CFR 136.3(a) Table IB (55) |
USGS I-3765-85 |
1985 |
Solids, residue suspended evaporation 105 degrees C
|
U.S. Geological Survey |
| Housing and Urban Development Department |
|
24 CFR 200, Appendix A |
ACI 515.1R |
1985 |
Guide to the Use of Waterproofing, Dampproofing, Protective and Decorative Barrier Systems for Concrete
|
American Concrete Institute |
| Coast Guard |
|
46 CFR 164.120-5(d)(8) |
ISO 1675-1985(E) |
1985 |
Plastics—Liquid resins—Determination of density by the pyknometer method, Second Edition
|
International Organization for Standardization |
| Environmental Protection Agency |
|
40 CFR 147.1450(a)(5) |
NVUIC regulations |
1985 |
Nevada Administrative Code [NAC], Regulations and Rules of Practice and Procedure adopted Pursuant to NRS 534A, Sections 1 through 69, Inclusive. November 12, 1985 (amending NAC Chapter 534A)
|
State of Nevada |
| Coast Guard |
|
46 CFR 28.325(b) |
UL 217 |
1985 |
Single and Multiple Station Smoke Detectors
|
Underwriters Laboratories, Inc. |
| Transportation Department |
89 FR 15636 |
49 CFR 171 |
CGA G-4.1 |
1985 |
Hazardous Materials: Adoption of Miscellaneous Petitions and Updating Regulatory Requirements
|
Compressed Gas Association |
| Environmental Protection Agency |
85 FR 40594 |
40 CFR 260 |
ASTM E681-85 |
1985 |
Modernizing Ignitable Liquids Determinations
|
ASTM International |
| Mine Safety and Health Administration |
|
30 CFR 57.14130(j) |
SAE J-386 |
1985 |
Operator Restraint Systems for Off-Road Work Machines
|
Society of Automotive Engineers |
| Environmental Protection Agency |
|
40 CFR 60.17(f)(4) |
ASME MFC-5M |
1985 |
Measurement of Liquid Flow in Closed Conduits Using Transit-Time Ultrasonic Flowmeters
|
American Society of Mechanical Engineers |
| Housing and Urban Development Department |
|
24 CFR 200, Appendix A |
WQA S-100 |
1985 |
Household Commercial and Portable Exchange Water Softeners
|
Water Quality Association |
| Transportation Department |
89 FR 15636 |
49 CFR 180 |
CGA G-2.2 |
1985 |
Hazardous Materials: Adoption of Miscellaneous Petitions and Updating Regulatory Requirements
|
Compressed Gas Association |
| Environmental Protection Agency |
|
40 CFR 136.3(a) Table IB (40) |
USGS I-4540-85 |
1985 |
Nitrogen, nitrite, total, colorimetric, diazotization, automated-segmented flow
|
U.S. Geological Survey |
| Housing and Urban Development Department |
|
24 CFR 200, Appendix A |
SCACM Publication |
1985 |
Certified Construction Standards and Specifications, Guide for Uniform Cabinet Specifications
|
Southern California Association of Cabinet Manufacturers |