| National Highway Traffic Safety Administration |
|
49 CFR 572.121 Table A |
Drawing No. 127-4000 |
1987 |
Leg Assembly
|
Reprographic Technologies |
| National Highway Traffic Safety Administration |
|
49 CFR 572.177(b)(2) |
Drawing No. SA-572-S40 |
1987 |
Lower neck force and moment transducer
|
Reprographic Technologies |
| Environmental Protection Agency |
|
40 CFR 61.18(d)(1)(i) |
EPA Method 8020 |
1987 |
Aromatic Volatile Organics
|
U.S. Environmental Protection Agency |
| National Highway Traffic Safety Administration |
|
49 CFR 572.35(b)(2)(i) |
Drawing No. 78051-16 |
1987 |
Knee cap assembly
|
General Motors Corporation |
| Environmental Protection Agency |
|
40 CFR 60, Appendix A-8, Method 29, Section 17.0(3) |
EPA Method 200.7 |
1987 |
Inductively Coupled Plasma Atomic Emission Spectrometric Method for Trace Element Analysis of Water and Wastes
|
U.S. Environmental Protection Agency |
| National Highway Traffic Safety Administration |
|
49 CFR 572.123(b)(2)(iv) |
Drawing No. SA-572-S11 |
1987 |
Six axis neck transducer
|
National Highway Traffic Safety Administration, U.S. Department of Transportation |
| National Highway Traffic Safety Administration |
|
49 CFR 572.133(c)(2) |
Drawing No. 880105-206 |
1987 |
Neck cable
|
Reprographic Technologies |
| National Highway Traffic Safety Administration |
|
49 CFR 572.172(a) |
Drawing No. SA-572-S11 |
1987 |
Six axis neck transducer
|
National Highway Traffic Safety Administration, U.S. Department of Transportation |
| National Highway Traffic Safety Administration |
|
49 CFR 572.111(a)(6) |
Drawing No. SA 150 M081 |
1987 |
Left Leg Assembly
|
National Highway Traffic Safety Administration, U.S. Department of Transportation |
| National Highway Traffic Safety Administration |
|
49 CFR 572.126(b) |
Drawing No. 127-4013 |
1987 |
Knee machined
|
Reprographic Technologies |
| National Highway Traffic Safety Administration |
|
49 CFR 572.137(f) |
Drawing No. SA-572-S15 |
1987 |
Lumbar spine force-moment transducer
|
National Highway Traffic Safety Administration, U.S. Department of Transportation |
| National Highway Traffic Safety Administration |
|
49 CFR 572.152(c)(3)(ii) |
Drawing No. 910420-003 |
1987 |
Neck transducer mass simulator
|
Reprographic Technologies |
| National Highway Traffic Safety Administration |
|
49 CFR 572.173(b)(2)(iii) |
Drawing No. SA-572-S11 |
1987 |
Six axis neck transducer
|
National Highway Traffic Safety Administration, U.S. Department of Transportation |
| Coast Guard |
|
46 CFR 175.600(b) Table |
ABYC H-32 |
1987 |
Ventilation of Boats Using Diesel Fuel
|
American Boat and Yacht Council |
| Environmental Protection Agency |
|
40 CFR 147.1750(a)(3) |
NDUIC regulations |
1987 |
North Dakota Administrative Code, Chapter 43-02-03 (General Rules, as published in Statutes and Rules for the Conservation of Oil and Gas, North Dakota Industrial Commission
|
State of North Dakota |
| Coast Guard |
|
46 CFR 67.13(b) |
DOC Publication 55DC |
1987 |
Codes for Named Populated Places, Primary County Divisions, and Other Locational Entities of the United States and Outlying Areas
|
U.S. Department of Commerce |
| National Highway Traffic Safety Administration |
|
49 CFR 572.41(a)(6) |
Drawing No. SA 150 M081 |
1987 |
Left Leg Assembly
|
National Highway Traffic Safety Administration, U.S. Department of Transportation |
| National Highway Traffic Safety Administration |
|
49 CFR 572.113(a)(2) |
Drawing No. 78051-301 |
1987 |
Neck cable
|
General Motors Corporation |
| National Highway Traffic Safety Administration |
|
49 CFR 572.127(f) |
Drawing No. 127-0000 |
1987 |
Technical drawings and specifications package
|
Reprographic Technologies |
| Environmental Protection Agency |
|
40 CFR 60.41c Natural gas (2) |
ASTM D1835 |
1987 |
Standard Specification for Liquefied Petroleum (LP) Gases
|
ASTM International |
| National Highway Traffic Safety Administration |
|
49 CFR 572.142(a) |
Drawing No. ATD 6259 |
1987 |
Adapter plate
|
Reprographic Technologies |
| Coast Guard |
|
33 CFR 126.5(b) |
ASTM F1121 |
1987 |
Standard Specification for International Shore Connections for Marine Fire Applications
|
ASTM International |
| National Highway Traffic Safety Administration |
|
49 CFR 572.33(b) |
Drawing No. 78051-305 |
1987 |
Title not specified
|
General Motors Corporation |
| Environmental Protection Agency |
|
40 CFR 60.17(g)(54) |
ASTM D1266 |
1987 |
Standard Test Method for Sulfur in Petroleum Products (Lamp Method)
|
ASTM International |
| Coast Guard |
|
46 CFR 164.120-5(d)(9) |
ISO 2039-2:1987(E) |
1987 |
Plastics—Determination of hardness—Part 2: Rockwell hardness, Second Edition
|
International Organization for Standardization |
| Environmental Protection Agency |
|
40 CFR 58 Appendix E, 12.0(29) |
EPA-450-4-87-009 |
1987 |
Optimum Network Design and Site Exposure Criteria for Particulate Matter, Koch, R.C. and H.E. Rector. EPA Contract No. 68-02-3584
|
U.S. Environmental Protection Agency |
| Environmental Protection Agency |
|
40 CFR 60, Appendix A-8, Method 29, Section 17.0(4) |
EPA Method 1 |
1987 |
Sample and Velocity Traverses for Stationary Sources
|
U.S. Environmental Protection Agency |
| Environmental Protection Agency |
|
40 CFR 60.17(l)(1) |
ISO 8316 |
1987 |
Measurement of Liquid Flow in Closed Conduits-Method by Collection of the Liquid in a Volumetric Tank
|
International Organization for Standardization |
| National Highway Traffic Safety Administration |
|
49 CFR 572.123(c)(2) |
Drawing No. 9000341 |
1987 |
Jam Nut
|
Reprographic Technologies |
| Environmental Protection Agency |
|
40 CFR 63, Subpart JJJJJJ, Table 5, (1)(d) |
ASTM E711 |
1987 |
Standard Test Method for Gross Calorific Value of Refuse-Derived Fuel by the Bomb Calorimeter
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 75.19(c)(3)(ii)(B)(2) |
API Bulletin 2509 B |
1987 |
Shop Testing of Automatic Liquid Level Gages
|
American Petroleum Institute |
| Coast Guard |
|
46 CFR 161.010-1(b) |
UL 1196 |
1987 |
Standard for Floating Waterlights
|
Underwriters Laboratories, Inc. |
| National Highway Traffic Safety Administration |
|
49 CFR 572.36(e) |
Drawing No. 78051-218 |
1987 |
Hybrid III Anthropomorphic Test Dummy, Revision T
|
General Motors Corporation |
| National Highway Traffic Safety Administration |
|
49 CFR 572.111(a)(6) |
Drawing No. SA-SID-M080 |
1987 |
Leg Assembly, Right
|
Reprographic Technologies |
| National Highway Traffic Safety Administration |
|
49 CFR 572.126(b) |
Drawing No. 127-4011 |
1987 |
Knee flesh
|
Reprographic Technologies |
| National Highway Traffic Safety Administration |
|
49 CFR 572.153(b)(1)(iii) |
Drawing No. SA-572-S23 |
1987 |
Neck transducer
|
National Highway Traffic Safety Administration, U.S. Department of Transportation |
| Housing and Urban Development Department |
|
24 CFR 200, Appendix A |
ANSI/NWWDA I.S. 2 |
1987 |
Industry Standard for Wood Windows
|
National Wood Window and Door Association |
| National Highway Traffic Safety Administration |
|
49 CFR 572.113(a)(3) |
Drawing No. 78051-303 |
1987 |
Neck Bracket
|
General Motors Corporation |
| Environmental Protection Agency |
|
40 CFR 761.19(a)(9) |
ASTM D1266 |
1987 |
Standard Test Method for Sulfur in Petroleum Products (Lamp Method)
|
ASTM International |
| National Highway Traffic Safety Administration |
|
49 CFR 572.142(a) |
Drawing No. TE-107-001 |
1987 |
Structural replacement of 1/2 mass of the neck load transducer
|
Reprographic Technologies |
| Environmental Protection Agency |
|
40 CFR 141.25(a) Table |
EPA-520-5-84-006 |
1987 |
Radiochemistry Procedures Manual
|
U.S. Environmental Protection Agency |
| National Highway Traffic Safety Administration |
|
49 CFR 572.33(b) |
Drawing No. 78051-306 |
1987 |
Title not specified
|
General Motors Corporation |
| National Highway Traffic Safety Administration |
|
49 CFR 572.122(a) |
Drawing No. 127-0000 |
1987 |
Technical drawings and specifications package
|
Reprographic Technologies |
| National Highway Traffic Safety Administration |
|
49 CFR 572.132(a) |
Drawing No. SA-572-S11 |
1987 |
Six axis neck transducer
|
National Highway Traffic Safety Administration, U.S. Department of Transportation |
| Energy Department |
87 FR 75144 |
10 CFR 429 |
ANSI/ASHRAE Standard 41.2-1987 (RA 92) |
1987 |
Energy Conservation Program: Test Procedure for Single Package Vertical Air Conditioners and Single Package Vertical Heat Pumps
|
American Society of Heating, Refrigerating and Air Conditioning Engineers |
| National Highway Traffic Safety Administration |
|
49 CFR 572.172(a) |
Drawing No. SA-572-S4 |
1987 |
Accelerometer Specification
|
Reprographic Technologies |
| Environmental Protection Agency |
|
40 CFR 799.9120(f)(7) |
OECD No. 402 |
1987 |
Guidelines for Testing of Chemicals, Acute Dermal Toxicity
|
Organization for Economic Cooperation and Development |
| National Highway Traffic Safety Administration |
|
49 CFR 572.111(a)(6) |
Drawing No. SA-SID-M081 |
1987 |
Leg Assembly, Left
|
Reprographic Technologies |
| National Highway Traffic Safety Administration |
|
49 CFR 572.126(b) |
Drawing No. 127-4014 |
1987 |
Lower leg
|
Reprographic Technologies |
| National Highway Traffic Safety Administration |
|
49 CFR 572.137(h) |
Drawing No. SA-572-S4 |
1987 |
Accelerometer Specification
|
Reprographic Technologies |