| Environmental Protection Agency |
|
40 CFR 761.19(a)(9) |
ASTM D1266 |
1987 |
Standard Test Method for Sulfur in Petroleum Products (Lamp Method)
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 136.3(b)(33)(xvii) |
USGS Publication |
1987 |
Methods for the Determination of Organic Substances in Water and Fluvial Sediments, Wershaw, R.L., et al, Techniques of Water-Resources Investigations of the U.S. Geological Survey, Book 5, Chapter A3
|
U.S. Geological Survey |
| Housing and Urban Development Department |
|
24 CFR 200, Appendix A |
ASME/ANSI A17.1 |
1987 |
Safety Code for Elevators, Dumbwaiters and Moving Walks including the A17.1b Addendum
|
American Society of Mechanical Engineers |
| Environmental Protection Agency |
|
40 CFR 60.17(g)(54) |
ASTM D1266 |
1987 |
Standard Test Method for Sulfur in Petroleum Products (Lamp Method)
|
ASTM International |
| National Highway Traffic Safety Administration |
|
49 CFR 572.127(i) |
Drawing No. 127-0000 |
1987 |
Technical drawings and specifications package
|
Reprographic Technologies |
| Energy Department |
88 FR 17934 |
10 CFR 431 |
ISO 5198:1987(E) |
1987 |
Energy Conservation Program: Test Procedure for Commercial and Industrial Pumps
|
International Organization for Standardization |
| National Highway Traffic Safety Administration |
|
49 CFR 572.177(a)(4) |
Drawing No. SA-572-S11 |
1987 |
Six axis neck transducer
|
National Highway Traffic Safety Administration, U.S. Department of Transportation |
| Environmental Protection Agency |
|
40 CFR 147.1750(a)(3) |
NDUIC regulations |
1987 |
North Dakota Administrative Code, Chapter 43-02-03 (General Rules, as published in Statutes and Rules for the Conservation of Oil and Gas, North Dakota Industrial Commission
|
State of North Dakota |
| Environmental Protection Agency |
|
40 CFR 61.18(d)(1)(i) |
EPA Method 8020 |
1987 |
Aromatic Volatile Organics
|
U.S. Environmental Protection Agency |
| National Highway Traffic Safety Administration |
|
49 CFR 572.133(b) |
Drawing No. SA-572-S11 |
1987 |
Six axis neck transducer
|
National Highway Traffic Safety Administration, U.S. Department of Transportation |
| National Highway Traffic Safety Administration |
|
49 CFR 572.35(c)(2)(iii) |
Drawing No. 78051-43 |
1987 |
Upper leg assembly
|
General Motors Corporation |
| National Highway Traffic Safety Administration |
|
49 CFR 572.125(a) |
Drawing No. 9001373 |
1987 |
Nylon Shoulder Bushing
|
Reprographic Technologies |
| National Highway Traffic Safety Administration |
|
49 CFR 572.136(b)(1) |
Drawing No. 880105-651 |
1987 |
Foot assembly
|
Reprographic Technologies |
| National Highway Traffic Safety Administration |
|
49 CFR 572.136(b)(1) |
Drawing No. 880105-650 |
1987 |
Foot assembly
|
Reprographic Technologies |
| National Highway Traffic Safety Administration |
|
49 CFR 572.173(b) |
Drawing No. SA-572-S4 |
1987 |
Accelerometer Specification
|
Reprographic Technologies |
| Environmental Protection Agency |
|
40 CFR 60.17(f)(6) |
ASME MFC-7M |
1987 |
Measurement of Gas Flow by Means of Critical Flow Venturi Nozzles
|
American Society of Mechanical Engineers |
| National Highway Traffic Safety Administration |
|
49 CFR 572.41(a)(1) |
Drawing No. SA-SID-M010 |
1987 |
Title not specified
|
Reprographic Technologies |
| National Highway Traffic Safety Administration |
|
49 CFR 572.113 |
Drawing No. 78051-104 |
1987 |
Neck Assembly, revision F
|
General Motors Corporation |
| National Highway Traffic Safety Administration |
|
49 CFR 572.127(d)(1) |
Drawing No. 127-0000 |
1987 |
Technical drawings and specifications package
|
Reprographic Technologies |
| Environmental Protection Agency |
|
40 CFR 98.7(d)(5) |
ASME MFC-7M |
1987 |
Measurement of Gas Flow by Means of Critical Flow Venturi Nozzles
|
American Society of Mechanical Engineers |
| Environmental Protection Agency |
|
40 CFR 61, Appendix D, Purpose and Background |
NRC Guide 3.59 |
1987 |
Methods for Estimating Radioactive and Toxic Airborne Source Terms for Uranium Milling Operations
|
U.S. Nuclear Regulatory Commission |
| Coast Guard |
|
46 CFR 56.01-2(k)(13) |
MSS SP-72 |
1987 |
Ball Valves with Flanged or Butt-Welding Ends for General Service
|
Manufacturers Standardization Society of the Valve and Fittings Industry |
| National Highway Traffic Safety Administration |
|
49 CFR 572.127(j) |
Drawing No. SA-572-S10 |
1987 |
Force sensing device
|
National Highway Traffic Safety Administration, U.S. Department of Transportation |
| Rural Utilities Service |
|
7 CFR 1755.910(a)(7) |
ASTM A153 |
1987 |
Standard Specification for Zinc Coating (Hot-Dip) on Iron and Steel Hardware
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 52.742(a)(2) |
ASTM D2369 |
1987 |
Standard Test Method for Volatile Content of Coatings
|
ASTM International |
| National Highway Traffic Safety Administration |
|
49 CFR 572.123(b) |
Drawing No. TE-127-1025 |
1987 |
Bib Simulator
|
Reprographic Technologies |
| National Highway Traffic Safety Administration |
|
49 CFR 572.133(b) |
Drawing No. SA-572-S4 |
1987 |
Accelerometer Specification
|
Reprographic Technologies |
| Coast Guard |
|
46 CFR 164.120-5(d)(9) |
ISO 2039-2:1987(E) |
1987 |
Plastics—Determination of hardness—Part 2: Rockwell hardness, Second Edition
|
International Organization for Standardization |
| Environmental Protection Agency |
|
40 CFR 141.25(a) Table |
EPA-520-5-84-006 |
1987 |
Radiochemistry Procedures Manual
|
U.S. Environmental Protection Agency |
| Environmental Protection Agency |
|
40 CFR 799.9110(f)(7) |
OECD No. 401 |
1987 |
Guidelines for Testing of Chemicals, Acute Oral Toxicity
|
Organization for Economic Cooperation and Development |
| National Highway Traffic Safety Administration |
|
49 CFR 572.177(b)(5) |
Drawing No. SA-572-S4 |
1987 |
Accelerometer Specification
|
Reprographic Technologies |
| Energy Department |
87 FR 75144 |
10 CFR 429 |
ANSI/ASHRAE 41.2-1987 (RA 92) |
1987 |
Energy Conservation Program: Test Procedure for Single Package Vertical Air Conditioners and Single Package Vertical Heat Pumps
|
American Society of Heating, Refrigerating and Air Conditioning Engineers |
| National Highway Traffic Safety Administration |
|
49 CFR 572.35(c)(2)(iii) |
Drawing No. 78051-44 |
1987 |
Upper leg assembly
|
General Motors Corporation |
| National Highway Traffic Safety Administration |
|
49 CFR 572.125(a) |
Drawing No. 9001336 |
1987 |
Jam Nut
|
Reprographic Technologies |
| Rural Utilities Service |
|
7 CFR 1755.390(a)(7) |
ASTM A505 |
1987 |
Standard Specification for General Requirements for Steel, Sheet and Strip, Alloy, Hot-Rolled and Cold-Rolled
|
ASTM International |
| National Highway Traffic Safety Administration |
|
49 CFR 572.136(b)(1) |
Drawing No. SA-572-S14 |
1987 |
Femur load transducer
|
National Highway Traffic Safety Administration, U.S. Department of Transportation |
| National Highway Traffic Safety Administration |
|
49 CFR 572.173(b)(1)(i) |
Drawing No. SA-572-S11 |
1987 |
Six axis neck transducer
|
National Highway Traffic Safety Administration, U.S. Department of Transportation |
| Energy Department |
|
10 CFR 440 Appendix A |
NWWDA I.S. 2 |
1987 |
Industry Standard for Wood Windows
|
National Wood Window and Door Association |
| Environmental Protection Agency |
|
40 CFR 60.107a(d)(5)(v) |
ASME MFC-7M |
1987 |
Measurement of Gas Flow by Means of Critical Flow Venturi Nozzles
|
American Society of Mechanical Engineers |
| National Highway Traffic Safety Administration |
|
49 CFR 572.41(a)(2) |
Drawing No. SA 150 M020 |
1987 |
Neck assembly
|
National Highway Traffic Safety Administration, U.S. Department of Transportation |
| National Highway Traffic Safety Administration |
|
49 CFR 572.113 |
Drawing No. 78051-303 |
1987 |
Neck Assembly, revision E
|
General Motors Corporation |
| National Highway Traffic Safety Administration |
|
49 CFR 572.127(d)(2) |
Drawing No. SA-572-S26 |
1987 |
Lower neck force/moment transducer
|
National Highway Traffic Safety Administration, U.S. Department of Transportation |
| National Highway Traffic Safety Administration |
|
49 CFR 572.155(e) |
Drawing No. SA-572-S4 |
1987 |
Accelerometer Specification
|
Reprographic Technologies |
| Environmental Protection Agency |
|
40 CFR 60.17(g)(90) |
ASTM D2369 |
1987 |
Standard Test Method for Volatile Content of Coatings
|
ASTM International |
| National Highway Traffic Safety Administration |
|
49 CFR 572.33(b) |
Drawing No. 78051-84 |
1987 |
Title not specified
|
General Motors Corporation |
| National Highway Traffic Safety Administration |
|
49 CFR 572.121 Table A |
Drawing No. 127-1000 |
1987 |
Head Assembly
|
Reprographic Technologies |
| National Highway Traffic Safety Administration |
|
49 CFR 572.127(j) |
Drawing No. 127-0000 |
1987 |
Technical drawings and specifications package
|
Reprographic Technologies |
| Rural Utilities Service |
|
7 CFR 1755.860(a)(6) |
ASTM B193 |
1987 |
Standard Test Method for Resistivity of Electrical Conductor Materials
|
ASTM International |
| Coast Guard |
|
46 CFR 56.01-2(d)(24) |
ASME B18.2.2 |
1987 |
Square and Hex Nuts (Inch Series)
|
American Society of Mechanical Engineers |
| National Highway Traffic Safety Administration |
|
49 CFR 572.5(b) |
Drawing No. SA 150 M080 |
1987 |
Right leg assembly
|
National Highway Traffic Safety Administration, U.S. Department of Transportation |