| Energy Department |
|
10 CFR 430 Subpart B, App. J1, 2.6.4.5.3 |
AATCC 118 |
1997 |
Oil Repellency: Hydrocarbon Resistance Test
Archived
|
American Association of Textile Chemists and Colorists |
| Energy Department |
|
10 CFR 431.105(d)(2)(ii) |
ASTM C177 |
1997 |
Standard Test Method for Steady-State Heat Flux Measurements and Thermal Transmission Properties by Means of the Guarded-Hot-Plate Apparatus
Archived
|
ASTM International |
| Energy Department |
|
10 CFR 430.3(c)(7) |
ANSI C78.375 |
1997 |
American National Standard for Fluorescent Lamps—Guide for Electrical Measurements
Archived
|
American National Standards Institute |
| Federal Trade Commission |
|
16 CFR 460.5(e)(1)(viii) |
ASTM C1363 |
1997 |
Standard Test Method for the Thermal Performance of Building Assemblies by Means of a Hot Box Apparatus
Archived
|
ASTM International |
| Energy Department |
|
10 CFR 434.701.1 RS-13 |
ANSI 101/I.S. 2 |
1997 |
Voluntary Specifications for Aluminum, Vinyl (PVC) and Wood Windows and Glass Doors (RS-13)
Archived
|
American National Standards Institute |
| Federal Aviation Administration |
|
14 CFR 36.6(c)(1)(x) |
IEC 60942 |
1997 |
Electroacoustics--Sound Calibrators, edition 2.0
Archived
|
International Electrotechnical Commission |
| Coast Guard |
|
46 CFR 25.01-3(b) |
ABYC A-16 |
1997 |
Electric Navigation Lights
Archived
|
American Boat and Yacht Council |
| Pipeline and Hazardous Materials Safety Administration |
|
49 CFR 171.7(a)(3) |
ASTM D1835 |
1997 |
Standard Specification for Liquefied Petroleum (LP) Gases
Archived
|
ASTM International |
| Pipeline and Hazardous Materials Safety Administration |
|
49 CFR 171.7(a)(3) |
ISO 11114-1 |
1997 |
Transportable gas cylinders--Compatibility of cylinder and valve materials with gas contents--Part 1: Metallic materials
Archived
|
International Organization for Standardization |
| Pipeline and Hazardous Materials Safety Administration |
|
49 CFR 171.7(a)(3) |
ISO 11621 |
1997 |
Gas cylinders--Procedures for change of gas service
Archived
|
International Organization for Standardization |
| Public Health Service |
|
42 CFR 52b.12(b) |
SBCCI Standard Plumbing Code |
1997 |
International Standard Plumbing Code
Archived
|
Southern Building Code Congress International |
| Public Health Service |
|
42 CFR 52b.12(b) |
SBCCI Standard Building Code |
1997 |
Standard Building Code
Archived
|
Southern Building Code Congress International |
| Public Health Service |
|
42 CFR 52b.12(b) |
ICBO Code |
1997 |
Uniform Building Code
Archived
|
International Conference of Building Officials |
| Public Health Service |
|
42 CFR 52b.12(b) |
NFPA 101 |
1997 |
Life Safety Code
Archived
|
National Fire Protection Association |
| Coast Guard |
|
46 CFR 110.10-1(g)(9) |
IEC 60079-5 |
1997 |
Electrical Apparatus for Explosive Gas Atmospheres—Part 5: Powder Filling “q”, Second Edition
Archived
|
International Electrotechnical Commission |
| Coast Guard |
|
46 CFR 110.10-1(g)(23) |
IEC 60092-352 |
1997 |
Electrical Installation in Ships—Choice and Installation of Cables for Low-Voltage Power Systems, Second Edition
Archived
|
International Electrotechnical Commission |
| Coast Guard |
|
46 CFR 175.600(b) Table |
ASTM D635 |
1997 |
Standard Test Method for Rate of Burning and/or Extent and Time of Burning of Plastics in a Horizontal Position
Archived
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 89.6(a)(1) |
ASTM D86 |
1997 |
Standard Test Method for Distillation of Petroleum Products at Atmospheric Pressure
Archived
|
ASTM International |
| Coast Guard |
|
46 CFR 199.05(b) |
ASTM D93 |
1997 |
Standard Test Method for Flash Point by Pensky-Martens Closed Cup Tester
Archived
|
ASTM International |
| Coast Guard |
|
46 CFR 108.101(b) |
ASTM D93 |
1997 |
Standard Test Method for Flash Point by Pensky-Martens Closed Cup Tester
Archived
|
ASTM International |
| Coast Guard |
|
46 CFR 114.600(b) |
ASTM D93 |
1997 |
Standard Test Method for Flash Point by Pensky-Martens Closed Cup Tester
Archived
|
ASTM International |
| Coast Guard |
|
46 CFR 125.180(b) |
ASTM D93 |
1997 |
Standard Test Method for Flash Point by Pensky-Martens Closed Cup Tester
Archived
|
ASTM International |
| Coast Guard |
|
46 CFR 175.600(b) Table |
ASTM D93 |
1997 |
Standard Test Method for Flash Point by Pensky-Martens Closed Cup Tester
Archived
|
ASTM International |
| Coast Guard |
|
46 CFR 78.01-2(b) |
ASTM D93 |
1997 |
Standard Test Method for Flash Point by Pensky-Martens Closed Cup Tester
Archived
|
ASTM International |
| Coast Guard |
|
46 CFR 97.01-2(b) |
ASTM D93 |
1997 |
Standard Test Method for Flash Point by Pensky-Martens Closed Cup Tester
Archived
|
ASTM International |
| Coast Guard |
|
46 CFR 56.01-2(l)(2) |
SAE J-1942 |
1997 |
Standards Hose and Hose Assemblies for Marine Applications
Archived
|
Society of Automotive Engineers |
| Coast Guard |
|
40 CFR 1065.1010(e)(3) |
ISO 3104 |
1997 |
Petroleum products--Transparent and opaque liquids--Determination of kinematic viscosity and calculation of dynamic viscosity
Archived
|
International Organization for Standardization |
| Coast Guard |
|
46 CFR 114.600(b) |
ASTM E648 |
1997 |
Standard Test Method for Critical Radiant Flux of Floor-Covering Systems Using a Radiant Heat Energy Source
Archived
|
ASTM International |
| Coast Guard |
|
46 CFR 114.600(b) |
ASTM E662 |
1997 |
Standard Test Method for Specific Optical Density of Smoke Generated by Solid Materials
Archived
|
ASTM International |
| Coast Guard |
|
46 CFR 110.10-1(g)(19) |
IEC 60092-302 |
1997 |
Electrical Installation in Ships, Part 302: Low-Voltage Switchgear and Control Gear Assemblies, Fourth Edition
Archived
|
International Electrotechnical Commission |
| Coast Guard |
|
46 CFR 63.05-1(e)(1) |
IMO Resolution MEPC.76(40) |
1997 |
Standard Specification for Shipboard Incinerators
Archived
|
International Maritime Organization |
| Environmental Protection Agency |
|
40 CFR 60.17(g)(69) |
ASTM D1835 |
1997 |
Standard Specification for Liquefied Petroleum (LP) Gases
Archived
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 60.17(g)(109) |
ASTM D2879 |
1997 |
Standard Test Method for Vapor Pressure--Temperature Relationship and Initial Decomposition Temperature of Liquids by Isoteniscope
Archived
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 60.17(g)(168) |
ASTM D5287 |
1997 |
Standard Practice for Automatic Sampling of Gaseous Fuels
Archived
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 63.14(g)(70) |
ASTM D6093 |
1997 |
Standard Test Method for Percent Volume Nonvolatile Matter in Clear or Pigmented Coatings Using a Helium Gas Pycnometer
Archived
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 63.14(d)(3) |
API MPMS |
1997 |
Evaporative Loss From Floating-Roof Tanks, First Edition, Chapter 19.2
Archived
|
American Petroleum Institute |
| Environmental Protection Agency |
|
40 CFR 63.14(d)(3)(iii) |
EPA-454-R-98-015 |
1997 |
Office of Air Quality Planning and Standards (OAQPS) Fabric Filter Bag Leak Detection Guidance
Archived
|
U.S. Environmental Protection Agency |
| Environmental Protection Agency |
|
40 CFR 63.14(l)(2) |
EPA-454-R-98-015 |
1997 |
Office of Air Quality Planning and Standards (OAQPS) Fabric Filter Bag Leak Detection Guidance
Archived
|
U.S. Environmental Protection Agency |
| Environmental Protection Agency |
|
40 CFR 98.7(e)(42) |
ASTM UOP 539 |
1997 |
Refinery Gas Analysis by Gas Chromatography
Archived
|
ASTM International |
| Food and Drug Administration |
|
21 CFR 172.869(b)(8) |
Food Chemicals Codex |
1997 |
Sucrose Fatty Acid Esters
Archived
|
National Academy Press |
| Environmental Protection Agency |
|
40 CFR 94.5(b)(1) |
Annex VI of MARPOL 73/78 |
1997 |
Resolution 2—Technical Code on Control of Emission of Nitrogen Oxides from Marine Diesel Engines
Archived
|
International Maritime Organization |
| Food and Drug Administration |
|
21 CFR 165.110(b)(4)(iii)(I)(1) |
EPA-600-R-98-118 |
1997 |
Method 300.1--Determination of Inorganic Anions in Drinking Water by Ion Chromatography
Archived
|
U.S. Environmental Protection Agency |
| Environmental Protection Agency |
|
40 CFR 60.17(i)(1) |
EPA-454-R-98-015 |
1997 |
Office of Air Quality Planning and Standards (OAQPS) Fabric Filter Bag Leak Detection Guidance
Archived
|
U.S. Environmental Protection Agency |
| Coast Guard |
|
36 CFR 1235.4(e)(4) |
ISO/IEC 15307 |
1997 |
Information Technology--Data Interchange on 12.7 mm 128-track Magnetic Tape Cartridges--DLT 4 Format
Archived
|
International Organization for Standardization / International Electrotechnical Commission |
| Coast Guard |
|
7 CFR 1755.506(d) |
IEEE C2 |
1997 |
National Electrical Safety Code
Archived
|
Institute of Electrical and Electronics Engineers |
| National Highway Traffic Safety Administration |
|
49 CFR 572.110(a)(5) |
Drawing No. 96-SIDH3-M001 |
1997 |
Complete Assembly SIDH3
Archived
|
Reprographic Technologies |
| National Highway Traffic Safety Administration |
|
49 CFR 572.110(a)(4) |
Drawing No. 96-SIDH3-006 |
1997 |
Upper and Middle Shoulder Form
Archived
|
Reprographic Technologies |
| National Highway Traffic Safety Administration |
|
49 CFR 572.110(a)(2) |
RT Publication |
1997 |
SID/Hybrid III Part 572 Subpart M User's Manual
Archived
|
Reprographic Technologies |
| National Highway Traffic Safety Administration |
|
49 CFR 572.110(a)(1) |
RT Publication |
1997 |
Anthropomorphic Test Dummy Parts List, SID/Hybrid III part 572, subpart M
Archived
|
Reprographic Technologies |
| National Highway Traffic Safety Administration |
|
49 CFR 572.110(a)(6) |
Drawing No. 78051-61X |
1997 |
Head Assembly—complete, revision C
Archived
|
Reprographic Technologies |