| Environmental Protection Agency |
|
40 CFR 86.1(g)(17) |
SAE J-1962 |
2002 |
Diagnostic Connector Equivalent to ISO/DIS 15031-3
|
Society of Automotive Engineers |
| Environmental Protection Agency |
|
40 CFR 86.1(g)(18) |
SAE J-1978 |
2002 |
OBD II Scan Tool—Equivalent to ISO/DIS 15031-4
|
Society of Automotive Engineers |
| Environmental Protection Agency |
|
40 CFR 86.1(g)(21) |
SAE J-2012 |
2002 |
Diagnostic Trouble Code Definitions Equivalent to ISO/DIS 15031-6
|
Society of Automotive Engineers |
| Environmental Protection Agency |
|
40 CFR 86.1(g)(25) |
SAE J-2534 |
2002 |
Recommended Practice for Pass-Thru Vehicle Programming
|
Society of Automotive Engineers |
| Environmental Protection Agency |
|
40 CFR 98.74(c)(7) |
ASTM D3176 |
2002 |
Standard Practice for Ultimate Analysis of Coal and Coke
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 98.164(b)(5)(xi) |
ASTM D5373 |
2002 |
Standard Methods for Instrumental Determination of Carbon, Hydrogen, and Nitrogen in Laboratory Samples of Coal and Coke
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 58 Appendix C, 6.0(7) |
EPA-454-B-02-2002 |
2002 |
Data Quality Objectives (DQOs) for Relating Federal Reference Method (FRM) and Continuous PM 2.5 Measurements to Report an Air Quality Index (AQI)
|
U.S. Environmental Protection Agency |
| Environmental Protection Agency |
|
40 CFR 58 Appendix C, 2.4.2.5 |
EPA-454-B-02-2002 |
2002 |
Data Quality Objectives (DQOs) for Relating Federal Reference Method (FRM) and Continuous PM 2.5 Measurements to Report an Air Quality Index (AQI)
|
U.S. Environmental Protection Agency |
| Environmental Protection Agency |
|
40 CFR 58 Appendix G, 13 |
EPA-454-B-02-002 |
2002 |
Data Quality Objectives (DQOs) For Relating Federal Reference Method (FRM) and Continuous PM 2.5 Measurements to Report an Air Quality Index (AQI), Eberly, S., T. Fitz-Simons, T. Hanley, et al.
|
U.S. Environmental Protection Agency |
| Environmental Protection Agency |
|
40 CFR 60, Appendix B, PS-12A, 8.4.4 |
ASTM D6784 |
2002 |
Standard Test Method for Elemental, Oxidized, Particle-Bound and Total Mercury in Flue Gas Generated from Coal-Fired Stationary Sources (Ontario Hydro Method)
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 60, Appendix B, PS-12A, 8.4.6.1 |
ASTM D6784 |
2002 |
Standard Test Method for Elemental, Oxidized, Particle-Bound and Total Mercury in Flue Gas Generated from Coal-Fired Stationary Sources (Ontario Hydro Method)
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 60.17(g)(163) |
ASTM D4629 |
2002 |
Standard Test Method for Trace Nitrogen in Liquid Petroleum Hydrocarbons by Syringe/Inlet Oxidative Combustion and Chemiluminescence Detection
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 60.17(g)(189) |
ASTM D6784 |
2002 |
Standard Test Method for Elemental, Oxidized, Particle-Bound and Total Mercury in Flue Gas Generated from Coal-Fired Stationary Sources (Ontario Hydro Method)
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 60.2730(j) |
ASTM D6784 |
2002 |
Standard Test Method for Elemental, Oxidized, Particle-Bound and Total Mercury in Flue Gas Generated from Coal-Fired Stationary Sources (Ontario Hydro Method)
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 60 Subpart DDDD, Table 2, Mercury |
ASTM D6784 |
2002 |
Standard Test Method for Elemental, Oxidized, Particle-Bound and Total Mercury in Flue Gas Generated from Coal-Fired Stationary Sources (Ontario Hydro Method)
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 60 Subpart DDDD, Table 6, Mercury |
ASTM D6784 |
2002 |
Standard Test Method for Elemental, Oxidized, Particle-Bound and Total Mercury in Flue Gas Generated from Coal-Fired Stationary Sources (Ontario Hydro Method)
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 60 Subpart DDDD, Table 7, Mercury |
ASTM D6784 |
2002 |
Standard Test Method for Elemental, Oxidized, Particle-Bound and Total Mercury in Flue Gas Generated from Coal-Fired Stationary Sources (Ontario Hydro Method)
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 60 Subpart DDDD, Table 9, Mercury |
ASTM D6784 |
2002 |
Standard Test Method for Elemental, Oxidized, Particle-Bound and Total Mercury in Flue Gas Generated from Coal-Fired Stationary Sources (Ontario Hydro Method)
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 60.56c(b)(13) |
ASTM D6784 |
2002 |
Standard Test Method for Elemental, Oxidized, Particle-Bound and Total Mercury in Flue Gas Generated from Coal-Fired Stationary Sources (Ontario Hydro Method)
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 60.17(g)(27) |
ASTM D240 |
2002 |
Standard Test Method for Heat of Combustion of Liquid Hydrocarbon Fuels by Bomb Calorimeter
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 60.107a(d)(7)(i) |
ASTM D240 |
2002 |
Standard Test Method for Heat of Combustion of Liquid Hydrocarbon Fuels by Bomb Calorimeter
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 60.4415(a)(1) |
ASTM D5287 |
2002 |
Standard Practice for Automatic Sampling of Gaseous Fuels
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 60.4415(a)(1)(i) |
ASTM D4294 |
2002 |
Standard Test Method for Sulfur in Petroleum and Petroleum Products by Energy-Dispersive X-Ray Fluorescence Spectrometry
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 60 Subpart LLLL, Table 1, Mercury |
ASTM D6784 |
2002 |
Standard Test Method for Elemental, Oxidized, Particle-Bound and Total Mercury in Flue Gas Generated from Coal-Fired Stationary Sources (Ontario Hydro Method)
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 60 Subpart LLLL, Table 2, Mercury |
ASTM D6784 |
2002 |
Standard Test Method for Elemental, Oxidized, Particle-Bound and Total Mercury in Flue Gas Generated from Coal-Fired Stationary Sources (Ontario Hydro Method)
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 60.4900(b)(4)(v) |
ASTM D6784 |
2002 |
Standard Test Method for Elemental, Oxidized, Particle-Bound and Total Mercury in Flue Gas Generated from Coal-Fired Stationary Sources (Ontario Hydro Method)
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 60 Subpart MMMM, Table 2, Mercury |
ASTM D6784 |
2002 |
Standard Test Method for Elemental, Oxidized, Particle-Bound and Total Mercury in Flue Gas Generated from Coal-Fired Stationary Sources (Ontario Hydro Method)
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 60 Subpart MMMM, Table 3, Mercury |
ASTM D6784 |
2002 |
Standard Test Method for Elemental, Oxidized, Particle-Bound and Total Mercury in Flue Gas Generated from Coal-Fired Stationary Sources (Ontario Hydro Method)
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 60.5220(b)(4)(v) |
ASTM D6784 |
2002 |
Standard Test Method for Elemental, Oxidized, Particle-Bound and Total Mercury in Flue Gas Generated from Coal-Fired Stationary Sources (Ontario Hydro Method)
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 63.14(g)(52) |
ASTM D4208 |
2002 |
Standard Test Method for Total Chlorine in Coal by the Oxygen Bomb Combustion/Ion Selective Electrode Method
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 63.14(g)(59) |
ASTM D5087 |
2002 |
Standard Test Method for Determining Amount of Volatile Organic Compound (VOC) Released from Solventborne Automotive Coatings and Available for Removal in a VOC Control Device (Abatement)
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 63.14(l)(20) |
EPA Method 1631 |
2002 |
Mercury in Water by Oxidation, Purge and Trap, and Cold Vapor Atomic Fluorescence Spectrometry, Revision E
|
U.S. Environmental Protection Agency |
| Environmental Protection Agency |
|
40 CFR 63.14(l)(20) |
EPA-821-R-02-019 |
2002 |
Method 1631, Mercury in Water by Oxidation, Purge and Trap, and Cold Vapor Atomic Absorption Fluorescence Spectrometry, Revision E
|
U.S. Environmental Protection Agency |
| Environmental Protection Agency |
|
40 CFR 143.4(b) Table (Sulfate) |
ASTM D516 |
2002 |
Standard Test Method for Sulfate Ion in Water
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 147.2200(a)(2) |
TXUIC regulations |
2002 |
Texas Statutory and Regulatory Requirements Applicable to the Underground Injection Control Program for Class III Brine Mining Wells
|
State of Texas |
| Environmental Protection Agency |
|
40 CFR 265.192(a)(3)(iii)(C) Note |
NACE RP-0285 |
2002 |
Recommended Practice for Control of External Corrosion on Metallic Buried, Partially Buried, or Submerged Liquid Storage Systems
|
National Association of Corrosion Engineers |
| Environmental Protection Agency |
|
40 CFR 265.195(f)(2) Note |
NACE RP-0285 |
2002 |
Recommended Practice for Control of External Corrosion on Metallic Buried, Partially Buried, or Submerged Liquid Storage Systems
|
National Association of Corrosion Engineers |
| Environmental Protection Agency |
|
40 CFR 430.02(g) |
NCASI Method CP-86.07 |
2002 |
Chlorinated Phenolics in Water by In situ Acetylation and GC/MS Determination
|
National Council of the Paper Industry for Air and Stream Improvement, Inc. |
| Environmental Protection Agency |
|
40 CFR 444.12(b)(1) Table (2) |
ASTM D3557D |
2002 |
Cadmium in Water by Graphite Furnace Atomic Absorption
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 799.5085(h)(1)(iv) |
ASTM E1148 |
2002 |
Standard Test Method for Measurements of Aqueous Solubility
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 799.5085(h)(2) |
ASTM E1148 |
2002 |
Standard Test Method for Measurements of Aqueous Solubility
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 799.5085(j) Table 3, A |
ASTM E1148 |
2002 |
Standard Test Method for Measurements of Aqueous Solubility
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 799.5087(h)(1)(iv) |
ASTM E1148 |
2002 |
Standard Test Method for Measurements of Aqueous Solubility
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 799.5087(h)(2) |
ASTM E1148 |
2002 |
Standard Test Method for Measurements of Aqueous Solubility
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 799.5087(j) Table 3, A |
ASTM E1148 |
2002 |
Standard Test Method for Measurements of Aqueous Solubility
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 799.5089(h)(1)(iv) |
ASTM E1148 |
2002 |
Standard Test Method for Measurements of Aqueous Solubility
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 799.5089(h)(2) |
ASTM E1148 |
2002 |
Standard Test Method for Measurements of Aqueous Solubility
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 799.5089(j) Table 3, A |
ASTM E1148 |
2002 |
Standard Test Method for Measurements of Aqueous Solubility
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 141.23(k)(1) Table (16) Mercury |
ASTM D3223 |
2002 |
Standard Test Method for Total Mercury in Water
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 141.25(a) Table |
ASTM D3972 |
2002 |
Standard Test Method for Isotopic Uranium in Water by Radiochemistry
|
ASTM International |