| Environmental Protection Agency |
|
40 CFR 63, Subpart DDDDD, Table 6, 4(d) |
ASTM E711 |
2004 |
Standard Test Method for Gross Calorific Value of Refuse-Derived Fuel by the Bomb Calorimeter
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 63.2354(b)(3)(i) |
ASTM D6420 |
2004 |
Standard Test Method for Determination of Gaseous Organic Compounds by Direct Interface Gas Chromatography-Mass Spectrometry
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 63.2354(b)(3)(ii) |
ASTM D6420 |
2004 |
Standard Test Method for Determination of Gaseous Organic Compounds by Direct Interface Gas Chromatography-Mass Spectrometry
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 63.2354(b)(3)(ii)(A) |
ASTM D6420 |
2004 |
Standard Test Method for Determination of Gaseous Organic Compounds by Direct Interface Gas Chromatography-Mass Spectrometry
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 63.2354(b)(3)(ii)(B) |
ASTM D6420 |
2004 |
Standard Test Method for Determination of Gaseous Organic Compounds by Direct Interface Gas Chromatography-Mass Spectrometry
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 63.10885(a)(1) |
EPA Method 9095B |
2004 |
Paint Filter Liquids Test, Revision 2
|
U.S. Environmental Protection Agency |
| Environmental Protection Agency |
|
40 CFR 63.457(b)(5)(i) |
ASTM D6420 |
2004 |
Standard Test Method for Determination of Gaseous Organic Compounds by Direct Interface Gas Chromatography-Mass Spectrometry
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 63, Subpart JJJJJJ, Table 5, (1)(d) |
ASTM E711 |
2004 |
Standard Test Method for Gross Calorific Value of Refuse-Derived Fuel by the Bomb Calorimeter
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 63.772(a)(1)(ii) |
ASTM D6420 |
2004 |
Standard Test Method for Determination of Gaseous Organic Compounds by Direct Interface Gas Chromatography-Mass Spectrometry
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 63.772(e)(3)(v) |
ASTM D6420 |
2004 |
Standard Test Method for Determination of Gaseous Organic Compounds by Direct Interface Gas Chromatography-Mass Spectrometry
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 63.772(e)(3)(v)(B)(2) |
ASTM D6420 |
2004 |
Standard Test Method for Determination of Gaseous Organic Compounds by Direct Interface Gas Chromatography-Mass Spectrometry
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 63.1282(a)(2)(ii) |
ASTM D6420 |
2004 |
Standard Test Method for Determination of Gaseous Organic Compounds by Direct Interface Gas Chromatography-Mass Spectrometry
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 63.1282(d)(3)(iii) |
ASTM D6420 |
2004 |
Standard Test Method for Determination of Gaseous Organic Compounds by Direct Interface Gas Chromatography-Mass Spectrometry
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 63.1282(d)(3)(iv) |
ASTM D6420 |
2004 |
Standard Test Method for Determination of Gaseous Organic Compounds by Direct Interface Gas Chromatography-Mass Spectrometry
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 63.1282(d)(3)(v) |
ASTM D6420 |
2004 |
Standard Test Method for Determination of Gaseous Organic Compounds by Direct Interface Gas Chromatography-Mass Spectrometry
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 63.1282(d)(3)(v)(B)(2) |
ASTM D6420 |
2004 |
Standard Test Method for Determination of Gaseous Organic Compounds by Direct Interface Gas Chromatography-Mass Spectrometry
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 72.13(a)(5) |
ASTM D7036 |
2004 |
Standard Practice for Competence of Air Emission Testing Bodies
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 75.6(b)(1) |
ASME MFC-3M |
2004 |
Measurement of Fluid Flow in Pipes Using Orifice, Nozzle, and Venturi
|
American Society of Mechanical Engineers |
| Environmental Protection Agency |
|
40 CFR 75.21(f) |
ASTM D7036 |
2004 |
Standard Practice for Competence of Air Emission Testing Bodies
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 75.59(a)(9)(xi)(C) |
ASTM D7036 |
2004 |
Standard Practice for Competence of Air Emission Testing Bodies
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 75.59(a)(15)(iii) |
ASTM D7036 |
2004 |
Standard Practice for Competence of Air Emission Testing Bodies
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 75.59(b)(6)(iii) |
ASTM D7036 |
2004 |
Standard Practice for Competence of Air Emission Testing Bodies
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 75.59(d)(4)(iii) |
ASTM D7036 |
2004 |
Standard Practice for Competence of Air Emission Testing Bodies
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 75, Appendix A, Section 6.1.2(a) |
ASTM D7036 |
2004 |
Standard Practice for Competence of Air Emission Testing Bodies
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 75, Appendix A, Section 6.1.2(b) |
ASTM D7036 |
2004 |
Standard Practice for Competence of Air Emission Testing Bodies
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 75, Appendix A, Section 6.1.2(d)(3) |
ASTM D7036 |
2004 |
Standard Practice for Competence of Air Emission Testing Bodies
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 75, Appendix A, Section 6.1.2(f) |
ASTM D7036 |
2004 |
Standard Practice for Competence of Air Emission Testing Bodies
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 75, Appendix A, Section 6.1.2(g) |
ASTM D7036 |
2004 |
Standard Practice for Competence of Air Emission Testing Bodies
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 75, Appendix D, Section 2.1.5.2(a) |
ASME MFC-3M |
2004 |
Measurement of Fluid Flow in Pipes Using Orifice, Nozzle, and Venturi
|
American Society of Mechanical Engineers |
| Environmental Protection Agency |
|
40 CFR 75, Appendix D, Section 2.1.6.4(a)(1) |
ASME MFC-3M |
2004 |
Measurement of Fluid Flow in Pipes Using Orifice, Nozzle, and Venturi
|
American Society of Mechanical Engineers |
| Environmental Protection Agency |
|
40 CFR 75, Appendix D, Section 2.1.6.4(a)(3) |
ASME MFC-3M |
2004 |
Measurement of Fluid Flow in Pipes Using Orifice, Nozzle, and Venturi
|
American Society of Mechanical Engineers |
| Environmental Protection Agency |
|
40 CFR 75, Appendix D, Section 2.1.6.4(b)(1) |
ASME MFC-3M |
2004 |
Measurement of Fluid Flow in Pipes Using Orifice, Nozzle, and Venturi
|
American Society of Mechanical Engineers |
| Environmental Protection Agency |
|
40 CFR 75, Appendix D, Section 2.1.6.4(b)(3) |
ASME MFC-3M |
2004 |
Measurement of Fluid Flow in Pipes Using Orifice, Nozzle, and Venturi
|
American Society of Mechanical Engineers |
| Environmental Protection Agency |
|
40 CFR 80.2(ggg), No. 2D |
ASTM D975 |
2004 |
Standard Specification for Diesel Fuel Oils
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 80.1426(f)(7)(v)(A) |
ASTM E711 |
2004 |
Standard Test Method for Gross Calorific Value of Refuse-Derived Fuel by the Bomb Calorimeter
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 86.1(g)(11) |
SAE J-1939-13 |
2004 |
Off-Board Diagnostic Connector
|
Society of Automotive Engineers |
| Environmental Protection Agency |
|
40 CFR 98.7(d)(1) |
ASME MFC-3M |
2004 |
Measurement of Fluid Flow in Pipes Using Orifice, Nozzle, and Venturi
|
American Society of Mechanical Engineers |
| Environmental Protection Agency |
|
40 CFR 98.334(b)(2)(i) |
ASTM E1941 |
2004 |
Standard Test Method for Determination of Carbon in Refractory and Reactive Metals and Their Alloys
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 98.344(c)(1) |
ASME MFC-3M |
2004 |
Measurement of Fluid Flow in Pipes Using Orifice, Nozzle, and Venturi
|
American Society of Mechanical Engineers |
| Environmental Protection Agency |
|
40 CFR 98.354(c) |
EPA 305-X-04-001 |
2004 |
NPDES Compliance Inspection Manual, Chapter 5, Sampling
|
U.S. Environmental Protection Agency |
| Environmental Protection Agency |
|
40 CFR 98.354(d)(1) |
ASME MFC-3M |
2004 |
Measurement of Fluid Flow in Pipes Using Orifice, Nozzle, and Venturi
|
American Society of Mechanical Engineers |
| Environmental Protection Agency |
|
40 CFR 98.354(h)(1) |
ASME MFC-3M |
2004 |
Measurement of Fluid Flow in Pipes Using Orifice, Nozzle, and Venturi
|
American Society of Mechanical Engineers |
| Environmental Protection Agency |
|
40 CFR 98.364(e)(1) |
ASME MFC-3M |
2004 |
Measurement of Fluid Flow in Pipes Using Orifice, Nozzle, and Venturi
|
American Society of Mechanical Engineers |
| Environmental Protection Agency |
|
40 CFR 98.114(b)(2)(i) |
ASTM E1941 |
2004 |
Standard Test Method for Determination of Carbon in Refractory and Reactive Metals and Their Alloys
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 98.124(m)(1) |
ASME MFC-3M |
2004 |
Measurement of Fluid Flow in Pipes Using Orifice, Nozzle, and Venturi
|
American Society of Mechanical Engineers |
| Environmental Protection Agency |
|
40 CFR 98.164(b)(5)(xiii) |
ASTM D6883 |
2004 |
Standard Practice for Manual Sampling of Stationary Coal from Railroad Cars, Barges, Trucks, or Stockpiles
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 98.164(b)(5)(xvii) |
ISO 3170 |
2004 |
Petroleum liquids—Manual sampling—Third Edition
|
International Organization for Standardization |
| Environmental Protection Agency |
|
40 CFR 799.5089(j) Table 3, C1 |
ASTM E1218 |
2004 |
Standard Guide for Conducting Static Toxicity Tests with Microalgae
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 799.5089(j) Table 3, C2 |
ASTM E1218 |
2004 |
Standard Guide for Conducting Static Toxicity Tests with Microalgae
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 799.5089(j) Table 3, C3 |
ASTM E1218 |
2004 |
Standard Guide for Conducting Static Toxicity Tests with Microalgae
|
ASTM International |