| Environmental Protection Agency |
|
40 CFR 63.10005(i)(5)(ii) |
ASTM D4057 |
2006 |
Standard Practice for Manual Sampling of Petroleum and Petroleum Products, including Annex A1
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 63, Subpart JJJJJJ, Table 5, (1)(e) |
ASTM E871 |
2006 |
Standard Method of Moisture Analysis of Particulate Wood Fuels
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 63, Subpart JJJJJJ, Table 5, (1)(f) |
ASTM D6722 |
2006 |
Standard Test Method for Total Mercury in Coal and Coal Combustion Residues by the Direct Combustion Analysis
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 63.772(h)(4)(iii)(B)(3) |
ASTM D4891 |
2006 |
Standard Test Method for Heating Value of Gases in Natural Gas Range by Stolchiometric Combustion
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 63.1282(g)(4)(iii)(B)(3) |
ASTM D4891 |
2006 |
Standard Test Method for Heating Value of Gases in Natural Gas Range by Stolchiometric Combustion
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 75.6(a)(15) |
ASTM D1946 |
2006 |
Standard Method for Analysis of Reformed Gas by Gas Chromatography
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 75.6(a)(37) |
ASTM D4468 |
2006 |
Standard Test Method for Total Sulfur in Gaseous Fuels by Hydrogenolysis and Rateometric Calorimetry
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 75.6(a)(39) |
ASTM D4891 |
2006 |
Standard Test Method for Heating Value of Gases in Natural Gas Range by Stoichiometric Combustion
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 75.6(f)(1) |
API MPMS |
2006 |
Chapter 3, Section 2
|
American Petroleum Institute |
| Environmental Protection Agency |
|
40 CFR 75.19(c)(3)(ii)(B)(2) |
API MPMS |
2006 |
Chapter 3, Section 2
|
American Petroleum Institute |
| Environmental Protection Agency |
|
40 CFR 75, Appendix D, Section 2.3.3.1.2 |
ASTM D4468 |
2006 |
Standard Test Method for Total Sulfur in Gaseous Fuels by Hydrogenolysis and Rateometric Calorimetry
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 75, Appendix D, Section 2.3.4 |
ASTM D4891 |
2006 |
Standard Test Method for Heating Value of Gases in Natural Gas Range by Stoichiometric Combustion
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 75, Appendix F, Section 3.3.6.1 |
ASTM D1946 |
2006 |
Standard Method for Analysis of Reformed Gas by Gas Chromatography
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 75, Appendix F, Section 3.3.6.2 |
ASTM D4891 |
2006 |
Standard Test Method for Heating Value of Gases in Natural Gas Range by Stoichiometric Combustion
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 75, Appendix F, Section 5.5.2 |
ASTM D4891 |
2006 |
Standard Test Method for Heating Value of Gases in Natural Gas Range by Stolchiometric Combustion
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 75, Appendix G, Section 2.1.2 |
ASTM D1946 |
2006 |
Standard Method for Analysis of Reformed Gas by Gas Chromatography
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 80.2(kkkk)(1)(ii) |
ASTM D976 |
2006 |
Standard Methods for Calculated Cetane Index of Distillate Fuels
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 86.1(b)(7) |
ASTM D976 |
2006 |
Standard Test Method for Calculated Cetane Index of Distillate Fuels
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 86.1(b)(21) |
ASTM E1918 |
2006 |
Standard Test Method for Measuring Solar Reflectance of Horizontal and Low-Sloped Surfaces in the Field
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 86.1(c)(1) |
ANSI NGV1 |
2006 |
Connection Devices, 2nd edition
|
American National Standards Institute |
| Environmental Protection Agency |
|
40 CFR 86.1(g)(15) |
SAE J-1939-73 |
2006 |
Application Layer—Diagnostics
|
Society of Automotive Engineers |
| Environmental Protection Agency |
|
40 CFR 98.7(d)(7) |
ASME MFC-11M |
2006 |
Measurement of Fluid Flow by Means of Coriolis Mass Flowmeters
|
American Society of Mechanical Engineers |
| Environmental Protection Agency |
|
40 CFR 98.334(b)(2)(iii) |
ASTM C25 |
2006 |
Standard Test Method for Chemical Analysis of Limestone, Quicklime, and Hydrated Lime
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 98.344(b)(3) |
ASTM D1946 |
2006 |
Standard Method for Analysis of Reformed Gas by Gas Chromatography
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 98.344(c)(5) |
ASME MFC-11M |
2006 |
Measurement of Fluid Flow by Means of Coriolis Mass Flowmeters
|
American Society of Mechanical Engineers |
| Environmental Protection Agency |
|
40 CFR 98.354(g)(3) |
ASTM D1946 |
2006 |
Standard Test Method for Analysis of Reformed Gas by Gas Chromatography
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 98.354(h)(5) |
ASME MFC-11M |
2006 |
Measurement of Fluid Flow by Means of Coriolis Mass Flowmeters
|
American Society of Mechanical Engineers |
| Environmental Protection Agency |
|
40 CFR 98.364(c) |
ASTM D1946 |
2006 |
Standard Test Method for Analysis of Reformed Gas by Gas Chromatography
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 98.114(b)(2)(iii) |
ASTM C25 |
2006 |
Standard Test Method for Chemical Analysis of Limestone, Quicklime, and Hydrated Lime
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 98.124(e)(1)(ii) |
EPA Other Test Method 24 |
2006 |
Tracer Gas Protocol for the Determination of Volumetric Flow Rate Through the Ring Pipe of the Xact Multi-Metals Monitoring System, also known as Other Test Method 24 (Tracer Gas Protocol), Eli Lilly and Company Tippecanoe Laboratories
|
U.S. Environmental Protection Agency |
| Environmental Protection Agency |
|
40 CFR 98.124(m)(7) |
ASME MFC-11M |
2006 |
Measurement of Fluid Flow by Means of Coriolis Mass Flowmeters
|
American Society of Mechanical Engineers |
| Environmental Protection Agency |
|
40 CFR 98.144(b) |
ASTM D3682 |
2006 |
Standard Test Method for Major and Minor Elements in Combustion Residues from Coal Utilization Processes 2006
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 98.164(b)(5)(ii) |
ASTM D1946 |
2006 |
Standard Test Method for Analysis of Reformed Gas by Gas Chromatography
|
ASTM International |
| Transportation Department |
87 FR 44944 |
49 CFR 175 |
ISO 20475:2018 |
2006 |
Hazardous Materials: Harmonization With International Standards
|
International Organization for Standardization |
| Transportation Department |
87 FR 52224 |
49 CFR 192 |
NACE SP0206-2006 |
2006 |
Pipeline Safety: Safety of Gas Transmission Pipelines: Repair Criteria, Integrity Management Improvements, Cathodic Protection, Management of Change, and Other Related Amendments
|
National Association of Corrosion Engineers |
| Transportation Department |
85 FR 27810 |
49 CFR 171 |
ISO 22434:2006(E) |
2006 |
Hazardous Materials: Harmonization With International Standards
|
International Organization for Standardization |
| Homeland Security Department |
87 FR 68270 |
46 CFR 121 |
ISO 18813:2006 |
2006 |
Survival Craft Equipment-Update to Type Approval Requirements
|
International Organization for Standardization |
| Homeland Security Department |
87 FR 68270 |
46 CFR 121 |
ISO 25862:2009 |
2006 |
Survival Craft Equipment-Update to Type Approval Requirements
|
International Organization for Standardization |
| Homeland Security Department |
87 FR 68270 |
46 CFR 184 |
ISO 18813:2006 |
2006 |
Survival Craft Equipment-Update to Type Approval Requirements
|
International Organization for Standardization |
| Homeland Security Department |
87 FR 68270 |
46 CFR 199 |
ISO 18813:2006 |
2006 |
Survival Craft Equipment-Update to Type Approval Requirements
|
International Organization for Standardization |
| Homeland Security Department |
87 FR 68270 |
46 CFR 160 |
ISO 18813:2006 |
2006 |
Survival Craft Equipment-Update to Type Approval Requirements
|
International Organization for Standardization |
| Transportation Department |
85 FR 27810 |
49 CFR 172 |
ISO 22434:2006(E) |
2006 |
Hazardous Materials: Harmonization With International Standards
|
International Organization for Standardization |
| Transportation Department |
85 FR 27810 |
49 CFR 180 |
ISO 22434:2006(E) |
2006 |
Hazardous Materials: Harmonization With International Standards
|
International Organization for Standardization |
| Transportation Department |
85 FR 27810 |
49 CFR 173 |
ISO 22434:2006(E) |
2006 |
Hazardous Materials: Harmonization With International Standards
|
International Organization for Standardization |
| Environmental Protection Agency |
88 FR 4296 |
40 CFR 1027 |
ISO/IEC 18004:2006 |
2006 |
Control of Air Pollution From New Motor Vehicles: Heavy-Duty Engine and Vehicle Standards
|
International Organization for Standardization / International Electrotechnical Commission |
| Environmental Protection Agency |
88 FR 4296 |
40 CFR 1054 |
ISO/IEC 18004:2006 |
2006 |
Control of Air Pollution From New Motor Vehicles: Heavy-Duty Engine and Vehicle Standards
|
International Organization for Standardization / International Electrotechnical Commission |
| Environmental Protection Agency |
88 FR 4296 |
40 CFR 1048 |
ISO/IEC 18004:2006(E) |
2006 |
Control of Air Pollution From New Motor Vehicles: Heavy-Duty Engine and Vehicle Standards
|
International Organization for Standardization / International Electrotechnical Commission |
| Environmental Protection Agency |
88 FR 4296 |
40 CFR 85 |
ISO/IEC 18004:2006 |
2006 |
Control of Air Pollution From New Motor Vehicles: Heavy-Duty Engine and Vehicle Standards
|
International Organization for Standardization / International Electrotechnical Commission |
| Environmental Protection Agency |
88 FR 4296 |
40 CFR 1051 |
ISO/IEC 18004:2006 |
2006 |
Control of Air Pollution From New Motor Vehicles: Heavy-Duty Engine and Vehicle Standards
|
International Organization for Standardization / International Electrotechnical Commission |
| Environmental Protection Agency |
88 FR 4296 |
40 CFR 80 |
ISO/IEC 18004:2006 |
2006 |
Control of Air Pollution From New Motor Vehicles: Heavy-Duty Engine and Vehicle Standards
|
International Organization for Standardization / International Electrotechnical Commission |