| Environmental Protection Agency |
|
40 CFR 98.354(d)(4) |
ASTM D1941 |
2007 |
Standard Test Method for Open Channel Flow Measurement of Water with the Parshall Flume
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 98.123(c)(1)(i)(A) |
EPA Publication |
2007 |
Emissions Inventory Improvement Program, Volume II: Chapter 16, Methods for Estimating Air Emissions from Chemical Manufacturing Facilities, Final
|
U.S. Environmental Protection Agency |
| Environmental Protection Agency |
|
40 CFR 98.164(b)(5)(iii) |
ASTM D2013 |
2007 |
Standard Method of Preparing Coal Samples for Analysis
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 98.164(b)(5)(iv) |
ASTM D2234/D 2234M |
2007 |
Standard Practice for Collection of a Gross Sample of Coal
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 98.164(b)(5)(x) |
ASTM D5291 |
2007 |
Standard Test Methods for Instrumental Determination of Carbon, Hydrogen, and Nitrogen in Petroleum Products and Lubricants
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 136.3(a) Table IB (62) |
ASTM D1976 |
2007 |
Standard Test Method for Elements in Water by Inductively-Coupled Argon Plasma Atomic Emission Spectroscopy
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 136.3(a) Table IB (65) |
ASTM D516 |
2007 |
Standard Test Method for Sulfate Ion in Water
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 136.3(a) Table IB (70) |
ASTM D1976 |
2007 |
Standard Test Method for Elements in Water by Inductively-Coupled Argon Plasma Atomic Emission Spectroscopy
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 136.3(a) Table IB (74) |
ASTM D3373 |
2007 |
Standard Test Method for Vanadium in Water
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 136.3(a) Table IB (74) |
ASTM D1976 |
2007 |
Standard Test Method for Elements in Water by Inductively-Coupled Argon Plasma Atomic Emission Spectroscopy
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 136.3(a) Table IB (75) |
ASTM D1976 |
2007 |
Standard Test Method for Elements in Water by Inductively-Coupled Argon Plasma Atomic Emission Spectroscopy
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 272.201(c)(1)(i) |
ARHWMP |
2007 |
EPA Approved Arkansas Statutory and Regulatory Requirements Applicable to the Hazardous Waste Management Program
|
State of Arkansas |
| Environmental Protection Agency |
|
40 CFR 147.1(c) |
State and Tribal Statutes and Regulations |
2006 |
The relevant State or Tribal statutes and regulations that contain standards, requirements, and procedures applicable to owners or operators
|
U.S. Environmental Protection Agency |
| Environmental Protection Agency |
|
40 CFR 272.1751(c)(1)(i) |
NDHWMP |
2006 |
EPA Approved North Dakota Statutory and Regulatory Requirements Applicable to the Hazardous Waste Management Program
|
State of North Dakota |
| Environmental Protection Agency |
|
40 CFR 141.74(a)(1) Table (Total Coliform) |
APHA Method 9222 B |
2006 |
Membrane Filtration Qualitative (LES Endo): Total Coliform
|
American Public Health Association |
| Environmental Protection Agency |
|
40 CFR 141.402(c)(2) Table |
EPA Method 1600 |
2006 |
Enterococci in Water by Membrane Filtration Using membrane-Enterococcus Indoxyl-?-D-Glucoside Agar (mEI)
|
U.S. Environmental Protection Agency |
| Environmental Protection Agency |
|
40 CFR 141.402(c)(2) Table Note 7 |
APHA Method 9222 B |
2006 |
Membrane Filtration Qualitative (LES Endo): Total Coliform
|
American Public Health Association |
| Environmental Protection Agency |
|
40 CFR 52 Subpart ZZ |
WYSIP |
2006 |
State of Wyoming Implementation Plan with Regulatory and Nonregulatory Revisions
|
State of Wyoming |
| Environmental Protection Agency |
|
40 CFR 55.14(d)(3)(i) |
40 CFR part 52, subpart C |
2006 |
State of California Requirements Applicable to OCS Sources
|
U.S. Environmental Protection Agency |
| Environmental Protection Agency |
|
40 CFR 58 Appendix A, 6.0 (5) |
EPA-240-B-06-001 |
2006 |
Guidance for the Data Quality Objectives Process. EPA QA/G-4
|
U.S. Environmental Protection Agency |
| Environmental Protection Agency |
|
40 CFR 58 Appendix A, 2.7 |
USEPA Publication |
2006 |
List of Designated Reference and Equivalent Methods
|
U.S. Environmental Protection Agency |
| Environmental Protection Agency |
|
40 CFR 60.17(b)(4) |
AGA Report No. 7 |
2006 |
Measurement of Gas by Turbine Meters
|
American Gas Association |
| Environmental Protection Agency |
|
40 CFR 60.17(f)(4) |
ASME MFC-5M |
2006 |
Measurement of Liquid Flow in Closed Conduits Using Transit-Time Ultrasonic Flowmeters
|
American Society of Mechanical Engineers |
| Environmental Protection Agency |
|
40 CFR 60.17(f)(6) |
ASME MFC-7M |
2006 |
Measurement of Gas Flow by Means of Critical Flow Venturi Nozzles
|
American Society of Mechanical Engineers |
| Environmental Protection Agency |
|
40 CFR 60.17(f)(7) |
ASME MFC-9M |
2006 |
Measurement of Liquid Flow in Closed Conduits by Weighing Method
|
American Society of Mechanical Engineers |
| Environmental Protection Agency |
|
40 CFR 60.17(f)(8) |
ASME MFC-11M |
2006 |
Measurement of Fluid Flow by Means of Coriolis Mass Flowmeters
|
American Society of Mechanical Engineers |
| Environmental Protection Agency |
|
40 CFR 60.17(g)(78) |
ASTM D1946 |
2006 |
Standard Test Method for Analysis of Reformed Gas by Gas Chromatography
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 60.17(g)(162) |
ASTM D4468 |
2006 |
Standard Test Method for Total Sulfur in Gaseous Fuels by Hydrogenolysis and Rateometric Calorimetry
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 60.17(g)(165) |
ASTM D4809 |
2006 |
Standard Test Method for Heat of Combustion of Liquid Hydrocarbon Fuels by Bomb Calorimeter (Precision Method)
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 60.17(g)(167) |
ASTM D4891 |
2006 |
Standard Test Method for Heating Value of Gases in Natural Gas Range by Stoichiometric Combustion
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 60.18(c)(3)(i)(A) |
ASTM D1946 |
2006 |
Standard Method for Analysis of Reformed Gas by Gas Chromatography
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 60.18(f)(3) |
ASTM D1946 |
2006 |
Standard Method for Analysis of Reformed Gas by Gas Chromatography
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 60.45(f)(5)(i) |
ASTM D1946 |
2006 |
Standard Method for Analysis of Reformed Gas by Gas Chromatography
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 60.614(e)(2)(ii) |
ASTM D1946 |
2006 |
Standard Method for Analysis of Reformed Gas by Gas Chromatography
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 60.107a(d)(4)(iii) |
ASTM D1946 |
2006 |
Standard Method for Analysis of Reformed Gas by Gas Chromatography
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 60.107a(d)(5)(v) |
ASME MFC-7M |
2006 |
Measurement of Gas Flow by Means of Critical Flow Venturi Nozzles
|
American Society of Mechanical Engineers |
| Environmental Protection Agency |
|
40 CFR 60.107a(d)(5)(vi) |
ASME MFC-11M |
2006 |
Measurement of Fluid Flow by Means of Coriolis Mass Flowmeters
|
American Society of Mechanical Engineers |
| Environmental Protection Agency |
|
40 CFR 60.107a(d)(5)(xii) |
AGA Report No. 7 |
2006 |
Measurement of Gas Flow by Turbine Meters
|
American Gas Association |
| Environmental Protection Agency |
|
40 CFR 60.107a(d)(6)(ii) |
ASME MFC-5M |
2006 |
Measurement of Liquid Flow in Closed Conduits Using Transit-Time Ultrasonic Flowmeters
|
American Society of Mechanical Engineers |
| Environmental Protection Agency |
|
40 CFR 60.107a(d)(6)(iii) |
ASME MFC-9M |
2006 |
Measurement of Liquid Flow in Closed Conduits by Weighing Method
|
American Society of Mechanical Engineers |
| Environmental Protection Agency |
|
40 CFR 60.107a(d)(7)(iv) |
ASTM D1946 |
2006 |
Standard Method for Analysis of Reformed Gas by Gas Chromatography
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 60.107a(d)(7)(vi) |
ASTM D4809 |
2006 |
Standard Test Method for Heat of Combustion of Liquid Hydrocarbon Fuels by Bomb Calorimeter (Precision Method)
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 60.107a(d)(7)(vii) |
ASTM D4891 |
2006 |
Standard Test Method for Heating Value of Gases in Natural Gas Range by Stolchiometric Combustion
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 60.107a(e)(2)(v) |
ASTM D4468 |
2006 |
Standard Test Method for Total Sulfur in Gaseous Fuels by Hydrogenolysis and Rateometric Calorimetry
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 63.14(g)(48) |
ASTM D4057 |
2006 |
Standard Practice for Manual Sampling of Petroleum and Petroleum Products, including Annex A1
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 63.14(g)(57) |
ASTM D4891 |
2006 |
Standard Test Method for Heating Value of Gases in Natural Gas Range by Stolchiometric Combustion
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 63.14(g)(67) |
ASTM D5954 |
2006 |
Test Method for Mercury Sampling and Measurement in Natural Gas by Atomic Absorption Spectroscopy
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 63.14(g)(81) |
ASTM D6721 |
2006 |
Standard Test Method for Determination of Chlorine in Coal by Oxidative Hydrolysis Microcoulometry
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 63.14(g)(82) |
ASTM D6722 |
2006 |
Standard Test Method for Total Mercury in Coal and Coal Combustion Residues by the Direct Combustion Analysis
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 63.14(g)(95) |
ASTM E871 |
2006 |
Standard Method of Moisture Analysis of Particulate Wood Fuels
|
ASTM International |