This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation Sort descending | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Environmental Protection Agency | 40 CFR 147.1700(a)(5) | NCUIC regulations | 1989 | North Carolina Drinking Water Act, N.C. GEN. STAT. §§ 130A-311 through 130A-332 | State of North Carolina | |
Environmental Protection Agency | 40 CFR 63.5935 Corrosion-resistant industry standard | IAPMO PS 199 | 2015 | Title Unkown | International Association of Plumbing and Mechanical Officials | |
Nuclear Regulatory Commission | 10 CFR 50.73(b)(2)(ii)(F)(1) | IEEE 803 | 1983 | Recommended Practice for Unique Identification in Power Plants and Related Facilities | Institute of Electrical and Electronics Engineers | |
Housing and Urban Development Department | 24 CFR 3280.4(a) | DOC All Standards | 2013 | All specifications, standards and codes without specific reference | U.S. Department of Commerce | |
Research and Special Programs Administration | 42 CFR 460.72(b)(5)(iv) | NFPA 101 | 2000 | Life Safety Code, as amended by NFPA Temporary Interim Amendment 00-1(101) | National Fire Protection Association | |
Environmental Protection Agency | 40 CFR 60.17(g)(99) | ASTM D 2504 | 1993 | Standard Test Method for Noncondensable Gases in C3 and Lighter Hydrocarbon Products by Gas Chromatography | ASTM International | |
Environmental Protection Agency | 40 CFR 86.1807-01(f) | SAE J-1877 | 1994 | Recommended Practice for Bar-Coded Vehicle Identification Number Label | Society of Automotive Engineers | |
Health and Human Services Department | 45 CFR 162.1602(a) | ASC X12N 835 | 2000 | Health Care Claim Payment/Advice | Washington Publishing Company | |
Coast Guard | 29 CFR 1915.155(b)(2) | ANSI Z89.1 | 1997 | Safety Requirements for Industrial Head Protection | American National Standards Institute | |
National Highway Traffic Safety Administration | 40 CFR 136.3(a) Table IB (16) | APHA Method 4500-Cl B | 1997 | Chlorine by Iodometric Method I | American Public Health Association | |
Research and Special Programs Administration | 49 CFR 172.519(f) | ICAO Publication | 1993 | Technical Instructions for the Safe Transport of Dangerous Goods by Air | International Civil Aviation Organization | |
Coast Guard | 46 CFR 96.07-5(b)(1) | ABS Publication | 2013 | All ABS Standards | American Bureau of Shipping | |
National Highway Traffic Safety Administration | 49 CFR 571.208 S13.1 | SAE J-211/1 | 1980 | Instrumentation for Impact Tests | Society of Automotive Engineers | |
Rural Utilities Service | 7 CFR 1755.902(l)(7)(i) | ICEA S-87-640 | 2006 | Standard for Optical Fiber Outside Plant Communications Cable, 4th edition | Insulated Cable Engineers Association | |
Coast Guard | 46 CFR 110.10-1(f)(6) | IEEE 45 | 2002 | Recommended Practice for Electrical Installations On Shipboard | Institute of Electrical and Electronics Engineers | |
National Highway Traffic Safety Administration | 49 CFR 572.15(b) | Drawing No. SA 103C 061 | 1976 | Upper Leg Assembly Left | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Environmental Protection Agency | 40 CFR 136.3(a) Table ID (53) | APHA Method 6630 B | 2000 | Organochlorine Pesticides by Liquid/Liquid Extraction and GC/ECD | American Public Health Association | |
Environmental Protection Agency | 40 CFR 60.17(g)(116) | ASTM D 2986 | 1995 | Standard Practice for Measuring Volatile Organic Matter in Water by Aqueous-Injection Gas Chromatography | ASTM International | |
Nuclear Regulatory Commission | 10 CFR 50.55a(g)(6)(ii)(D)(1) | ASME Code Case N-729-1 | 2006 | Alternative Examination Requirements for PWR Reactor Vessel Upper Heads with Nozzles Having Pressure-Retaining Partial-Penetration Welds, Section XI, Division 1 | American Society of Mechanical Engineers | |
Occupational Safety and Health Administration | 29 CFR 1926.1433(b)(6) | ANSI B30.5, 5-1.3.3 | 2004 | Safety Code for Crawler, Locomotive and Truck Cranes, Telescoping Boom | American National Standards Institute | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (58) | EPA Method 1625 B | 1990 | Semivolatile Organic Compounds by Isotope Dilution GC/MS | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 141.40(a)(3) Table 1 (bromochloromethane (Halon 1011)) | EPA Method 524.3 | 2009 | Measurement of Purgeable Organic Compounds in Water by Capillary Column Gas Chromatography/Mass Spectrometry | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 60 Subpart MMMM, Table 3, Sulfur Dioxide | ASME PTC 19.10 | 1981 | Flue and Exhaust Gas Analyses [part 10, Instruments and Apparatus] | American Society of Mechanical Engineers | |
Environmental Protection Agency | 40 CFR 141.23(k)(1) Table (16) Mercury | APHA Method 3112 B | 1995 | Mercury by Cold Vapor Atomic Absorption | American Public Health Association | |
Environmental Protection Agency | 40 CFR 60, Appendix A-8, Method 29, Section 18.0, Table 29-3 | EPA Method 7091 | 1986 | Test Methods for Evaluating Solid Waste, Physical/Chemical Methods, SW-846 Third Edition | U.S. Environmental Protection Agency | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.901(a)(21) | AWS D1.4-98 | 1998 | Structural Welding Code—Reinforcing Steel | American Welding Society | |
Occupational Safety and Health Administration | 29 CFR 1910.94(b)(4)(ii) | ANSI Z9.2 | 1960 | Fundamentals Governing the Design and Operation of Local Exhaust Systems | American National Standards Institute | |
Rural Utilities Service | 7 CFR 1755.870(a)(6) | ASTM D 1248 | 1989 | Standard Specification for Polyethylene Plastics Molding and Extrusion Materials | ASTM International | |
Environmental Protection Agency | 40 CFR 136.3(b)(10)(viii) | APHA Method 2120 | 2001 | Color | American Public Health Association | |
Food and Drug Administration | 21 CFR 573.640(b)(4)(i) | AOAC Official Methods | 1980 | Official Methods of Analysis | AOAC International | |
Coast Guard | 46 CFR 56.01-2(e)(33) | ASTM A 369/A 369M | 1992 | Standard Specification for Carbon and Ferritic Alloy Steel Forged and Bored Pipe for High-Temperature Service | ASTM International | |
Mine Safety and Health Administration | 30 CFR 77.1109(f) | NFPA Publication | 1962 | National Fire Protection Association Handbook, 12th Edition | National Fire Protection Association | |
Coast Guard | 46 CFR 132.130(n) | UL 19 | 1993 | Fire hose | Underwriters Laboratories, Inc. | |
Coast Guard | 46 CFR 56.01-2(k)(15) | MSS SP-83 | 1995 | Class 3000 Steel Pipe Unions, Socket Welding and Threaded | Manufacturers Standardization Society of the Valve and Fittings Industry | |
Coast Guard | 46 CFR 25.45-2(b)(2) | NFPA 302 | 1998 | Fire Protection Standard for Pleasure and Commercial Motor Craft | National Fire Protection Association | |
Environmental Protection Agency | 40 CFR 261, Appendix IX, Tables 1 and 2 | EPA Method 0040 | 1996 | Sampling of Principal Organic Hazardous Constituents from Combustion Sources Using Tedlar® Bags | U.S. Environmental Protection Agency | |
Federal Motor Carrier Safety Administration | 49 CFR 393.55(c)(2) | FMVSS 121 | 1998 | Air Brake Systems | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Coast Guard | 46 CFR 53.10-3(a) | ASME B&PV Code | 2004 | Boiler and Pressure Vessel Code, Section IV, Rules for Construction of Heating Boilers | American Society of Mechanical Engineers | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB Footnote 8 | USGS Publication | 1979 | Methods for Determination of Inorganic Substances in Water and Fluvial Sediments, Techniques of Water-Resources Investigations of the U.S. Geological Survey, Book 5, Chapter A1 | U.S. Geological Survey | |
Occupational Safety and Health Administration | 29 CFR 1928.51(b)(1) | 29 CFR 1928.53 | 2021 | Protective Enclosures for Wheel-type Agricultural Tractors--Test procedures and performance requirements | Occupational Safety and Health Administration, U.S. Department of Labor | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (75) | HCC Method 8009 | 1979 | Zincon Method for Zinc, Hatch Handbook of Water Analysis | Hach Chemical Company | |
Energy Department | 10 CFR 431.86(c)(2)(ii) | HI BTS-2000 | 2001 | Method to Determine Efficiency of Commercial Space Heating Boilers | Hydronics Institute | |
Coast Guard | 46 CFR 160.151-7(b) | IMO Resolution MSC.293(87) | 2010 | Annex 7 to MSC 87/26, Report of the Maritime Safety Committee on its Eighty-Seventh Session, Resolution MSC.293(87), Adoption of Amendments to the International Life-Saving Appliance (LSA) Code | International Maritime Organization | |
Environmental Protection Agency | 40 CFR 1060.801 Carbon Working Capacity | ASTM D 5228 | 2005 | Standard Test Method for Determination of Butane Working Capacity of Activated Carbon | ASTM International | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IG Footnote 3 | EPA Method 1657 | 1993 | The Determination of Organo-Phosphorus Pesticides in Municipal and Industrial Wastewater | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 444.12(b)(1) Table (8) | APHA Method 2540 D | 1997 | Solids, Total Suspended Solids Dried at 103-105 degrees C | American Public Health Association | |
Environmental Protection Agency | 40 CFR 98.334(b)(2)(i) | ASTM E 1941 | 2004 | Standard Test Method for Determination of Carbon in Refractory and Reactive Metals and Their Alloys | ASTM International | |
Food and Drug Administration | 21 CFR 801.410(d)(2) | ASTM D 412 | 1968 | Standard Test Methods for Vulcanized Rubber and Thermoplastic Elastomers-Tension | ASTM International | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IF (Isopropyl acetate) | EPA Method 1666 | 1998 | Volatile Organic Compounds Specific to the Pharmaceutical Manufacturing Industry by Isotope Dilution Gas Chromatography/Mass Spectrometry | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 147.1050(a)(3) | MDUIC regulations | 1989 | Code of Maryland Regulations, Title 26, Subtitle 08, Chapter 02, promulgated and effective as of March 1, 1989 | State of Maryland |